Interlogix GE-DSGH-5-R, GE-DSGH-5 Specsheet

Part of GE Security

Network Transmission Products

GE-DSG/DSGH Series Gigabit Ethernet Switch

Overview

The GE-DSG/DSGH Series is a family of Gigabit Ethernet
Switches designed to deliver nonblocking, triple-speed
performance (10/100/1000Mbps) in demanding, heavy­industrial environments. A slim metal cabinet makes the
most of limited space.

A 10Gbps or 16Gbps internal switching fabric, combined
with 9K jumbo packet support, provides a secure platform
that can handle a large volume of traffic, whether it’s at
the backbone or server level. Auto-negotiation between
ports allows optimal speed detection through RJ-45
Category 6, 5 or 5e cables. An auto-MDI/MDI-X function
allows connection to other hubs or switches, without the
need for special straight or crossover cables.

Flow-control capabilities add flexibility in network
configuration, allowing integration of the devices with
various switch-supported routers and servers.

Standard Features

5 or 8 Gigabit Ethernet 10/100/1000Base-T ports •
with auto-MDI/MDI-X function for each port

IP-30 metal case for protection that allows either •
DIN-rail or wall mounting

12 to 48V DC, redundant power with polarity-reverse •
protection and connective removable terminal block
for master and slave power

Support for voltage/surge-suppression devices •
–VDC EFT 6000 protection for power line
–VDC ESD 6000 protection for Ethernet

Operates under a wide range of temperatures•

Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100 •
Base-TX, IEEE 802.3ab 1000Base-T Ethernet standards

Auto-negotiation and 10/100Mbps (half/full-duplex) and •
1000Mbps full-duplex mode

Store-and-forward switching architecture, broadcast •
storm control and runt/CRC filtering optimize network
bandwidth by eliminating erroneous packets

Back pressure (half-duplex) and IEEE 802.3x PAUSE •
frame-flow control (full-duplex) to prevent packet loss

GE-DSG/DSGH
series 5/8-Port
10/100/1000Mbps

Integrated address-lookup engine with support for 8K •
absolute MAC address table

176 kilobytes on-chip frame buffer•

9K jumbo packet-size support•

Automatic address learning and address aging•

CSMA/CD Protocol•

GE-DSG-8

8-Port 10/100/1000-T
Industrial Ethernet Switch

GE-DSGH-5

5-Port 10/100/1000-T
Industrial Ethernet Switch
(-40~75ºC)

(-10~60ºC)

GE-DSGH-8

8-Port 10/100/1000-T
Industrial Ethernet Switch
(-40~75ºC)

1.25 in.

(32 mm)

3.45 in.

(87.8 mm)

5.31 in.
(135 mm)

1.25 in.

(32 mm)

3.45 in.

(87.8 mm)

5.31 in.
(135 mm)

Industrial Gigabit Ethernet Switch Comparisons

Part of GE Security

North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [e-mail]

Asia
T 852-2907-8108
F 852-2142-5063

Australia and New Zealand
T 613-9239-1200
F 613-9239-1299

Europe
T 44-113-238-1668
F 44-113-253-8121

Latin America
T 305-593-4301
F 305-593-4300

gesecurity.com/ifs

Specifications subject to
change without notice.

© 2010 General Electric Company
All Rights Reserved

Dimensional Diagrams

GE-DSGH-5

GE SKU GE-DSGH-5 GE-DSGH-8 GE-DSG-8

GE Description

10/100/1000Base-T Ports

Installation

Dimensions (W) x (D) x (H)

Weight (lbs.)

EFT

Hardware Specifications

ESD

Power Input

Power Consumption

Power Connector

Electronic Specification

Switch Processing Scheme

Address Table

Buffer

Flow Chart

Switch Fabric

Throughput
(Packet per second)

Switch Specification

Jumbo Frame

Network Cables:
10/100/1000Base-T

Operating Temperature

5 8 8

DIN-rail kit and wall-mount ear

5.31" x 3.42" x 1.26"
135 x 87 x 32mm

1.0 lbs 1.045 lbs 1.045 lbs

6KV

6KV

12~48 VDC, Redundant power with polarity-reverse protection
function

11.9 Watts/40BTU 13.2 Watts/45BTU 13.2 Watts/45BTU

6-pin removable screw terminal

Store-and-forward

8K entries

176 kilobytes

Back pressure for half-duplex, IEEE 802.3x Pause frame for full-duplex

10Gbps 16Gbps 16Gbps

7.44Mpps@64Bytes 11.9Mpps@64Bytes 11.9Mpps@64Bytes

9Kbytes

Cat . 3, 4, 5, 5e, 6 UTP cable (100 meters, max.)
EIA/TIA-568 100-ohm STP (100 meters, max.)

-40ºC~75ºC -40ºC~75ºC -10ºC~60ºC

GE-DSGH-8/GE-DSG-8

Operating Humidity

Storage Temperature

Storage Humidity

Environment Specification

Standards Compliance

Stability testing

Network cables:

Standards Conformance

10/100/1000Base-TX

5% ~ 95% (non-condensing)

-40ºC~75ºC -40ºC~75ºC -40ºC~75ºC

5% ~ 95% (non-condensing)

IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-duplex flow

IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)

Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.)
EIA/TIA-568 100-ohm STP (100meters, max.)

Ordering Information

GE-DSGH-5 5-Port 10/100/1000-T Industrial Ethernet Switch (-40~75ºC)
GE-DSGH-8 8-Port 10/100/1000-T Industrial Ethernet Switch (-40~75ºC)
GE-DSG-8 8-Port 10/100/1000-T Industrial Ethernet Switch (-10~60ºC)

003-3302 2010/01 (60342)