GE
Video Surveillance
Security
Overview
Replace traditional analog dome cameras with the CamPlus™
IP Rugged Dome. The latest camera sensors and data signal
processing technology combine with sharp MPEG-4 compression
to send images quickly and easily over the network. The robust
dome housing can be installed indoors or outdoors and is
available with day/night capabilities for use in a variety of lighting
conditions.
The high-resolution CamPlus IP Rugged Dome camera receives
Power over Ethernet (PoE) for installation with only one cable, or
from a 12 VDC/24 VAC universal input to provide top-quality video
in any security network.
The IP Rugged Dome uses the latest MPEG-4 compression for
dual streaming high-resolution D1 images over the network.
Additionally, bandwidth is easy to manage for the specific needs
of each network – it’s even possible to set one stream to high
bandwidth and the other low. Or stream the D1 images live to one
location and stream to a recording station in a different location.
It’s simple to use web browser software for remote configuration,
to view images, and to upgrade firmware. Watch live video from
anywhere in the world with Internet access. Multicast support
allows multiple authorized users to connect, without bogging
down the network or slowing down connection to recording
locations.
CamPlus IP dome cameras are compatible with industry-standard
protocols like SMTP and TCP/IP for broadband connectivity.
With choices for different mounting environments and lighting
conditions, a CamPlus IP camera will work for virtually any
application.
IP Network Dome Camera
Standard Features
Dual streaming capabilities •
MPEG-4 compression delivers excellent picture quality•
Configuration tools to control bandwidth usage •
Power over Ethernet allows easy, one-cable installation•
Compatible with larger legacy systems•
Options available for wide range of lighting conditions•
Redundant Ethernet connections for stability•
Analog output increases set-up options•
Ability to verify events with alarm input and output•
Optional bi-directional audio •
CamPlus IP
Rugged Dome
high-resolution
network dome camera
Specifications
CamPlus IP Models IP Rugged Dome
Features
Sensor
Signal System
Effective Pixels (HxV)
Horiz. Resolution
Sensitivity
Frame Integration
Dynamic Range
S/N Ratio
Synchronization
Motion Detection
Electronic Shutter
Auto Iris Control
BLC
Gain
White Balance
D/N Switching
Alarm I/O
Video
Compression
Picture Resolution
Bit Rate
Composite Output
Audio
Compression
Line Input
Line Output
Network
LAN Port
WAN Port
Protocol
Security
Environmental
Operating Temperature
Electrical
Input Voltage
Power Consumption
Physical
Dimensions
Weight
Regulatory Certifications
D1: 720 x 480 (NTSC) / 720 x 576 (PAL); CIF: 352 x 480
(NTSC) / 352 x 288 (PAL); QCIF: 160 x 112 (NTSC) /176 x
1.0 V p-p with 75 ohms loading, BNC connector 1.0 V p-p with 75 ohms loading, BNC connector
1/3-in. interline transfer
double speed Super HAD CCD
NTSC or PAL standard NTSC or PAL standard
771 x 492 NTSC
753 x 582 PAL
520 TVL 520 TVL
0.015 lux @ F1.4
(20 IRE, SAGC on)
1x~32x 1x~32x
– –
Better than 50 dB (AGC off) Better than 50 dB (AGC off)
Line-lock Line-lock
Yes (3 windows) Yes (3 windows)
1/50 ~ 1/12000 sec (NTSC)
1/60 ~ 1/12000 sec (PAL)
DC DC
Auto detect on/off Auto detect on/off
0 ~ 18 dB 0 ~ 18 dB
AT W AT W
– Lens with I/R cut filter: auto
1 ea., TTL, terminal block 1 ea., TTL, terminal block
MPEG-4 ASP compliant MPEG-4 ASP compliant
144 (PAL)
28K ~ 3 Mbps 28K ~ 3 Mbps
8 kHz, Mono, PCM 8 kHz, Mono, PCM
Unbalanced, 1.4 V p-p,
1 Vrms, terminal block
Unbalanced, 1.4 V p-p,
1 Vrms, terminal block
Ethernet (10/100 Base-T)
RJ-45 connector
Ethernet (10/100 Base-T)
RJ-45 connector
TCP, UDP, IP, HTTP, DHCP,
PPPoE, RTP, RTSP
Password set by admin. Password set by admin.
-22 to 122°F (-30 to 50°C) -22 to 122°F (-30 to 50°C)
12 VDC ± 10% / PoE (IEEE 802.3af)
12 VDC ± 10% / 24 VAC ± 10%
12 W max. 12 W max.
2.05 x 5.55 x 2.76 in.
(52 x 141 x 70 mm)
1.2 lb. (540 g) 1.2 lb. (540 g)
FCC, CE, C-TICK, UL FCC, CE, C-TICK, UL
IP Rugged Dome
Day/Night
1/3-in. interline transfer
double speed Super HAD CCD
771 x 492 NTSC
753 x 582 PAL
0.015 lux @ F1.4
(20 IRE, SAGC on)
1/50 ~ 1/12000 sec (NTSC)
1/60 ~ 1/12000 sec (PAL)
D1: 720 x 480 (NTSC) / 720 x 576 (PAL); CIF: 352 x 480
(NTSC) / 352 x 288 (PAL); QCIF: 160 x 112 (NTSC) /176
x 144 (PAL)
Unbalanced, 1.4 V p-p,
1 Vrms, terminal block
Unbalanced, 1.4 V p-p,
1 Vrms, terminal block
Ethernet (10/100 Base-T)
RJ-45 connector
Ethernet (10/100 Base-T)
RJ-45 connector
TCP, UDP, IP, HTTP, DHCP,
PPPoE, RTP, RTSP
12 VDC ± 10% / PoE (IEEE 802.3af)
12 VDC ± 10% / 24 VAC ± 10%
2.05 x 5.55 x 2.76 in.
(52 x 141 x 70 mm)