UTP Transmission
Multi-Channel Mid-span Combiners
Overview
GE’s Multi-Channel VDP Mid-span Combiners are
now IFS. These Multi-Channel Video-Data-Power (VDP)
Mid-span Combiners insert PTZ data and power at a
mid-span point along with the camera signal over a single
four-pair UTP cable. At the camera end, an IFS VDP-B
Series Balun Combiner provides video, data and power
on separate outputs. This allows simplication of a CCTV
installation within a structured wiring environment. These
units are designed to be installed at a mid-span point for
overcoming power distance restrictions. This allows for
video with PTZ control transmission of up to 3,500 feet
(915m) when used with the VTP-AR6 Series UTP Multichannel Receiver Combiners.
VDP-MS Series
The VDP-MS Series are available in either 4- or 16-channel
congurations. These devices provide video pass-thru
and combines data and power onto the UTP cable at
a mid-span point. These are passive devices; however,
external power is required to inject camera power through
these devices onto the UTP cable.
Standard Features
Video
• Video pass-through
• NTSC, PAL and SECAM compatible
• 60dB crosstalk and noise immunity
Mid-span Combiner
• Inserts PTZ control data at mid-span
• Inserts camera power at mid-span
Design
• Combines video, data and power
• No power required for video
• 1U rack mount or wall-mount congurations
• RJ-45 plug-n-play installation
• Surge protection
Distance
• Extends VDP Series transmission up to 3,500 feet
Warranty
• Comprehensive Lifetime Warranty
VDP-MSP Series
The VDP-MSP Series are available in either 8- or 16-channel
congurations and also has a built-in fully-isolated class II
24/28 VAC power supply. Each camera power output, in
addition to an auto-reset fuse, is equipped with a 2 amp
glass fuse that is accessible from the front panel for extra
protection.
RJ-45 connectors provide video pass-through to the VTPAR4/AR6 series receivers. RJ-45 connectors also provide
PTZ data input from the DVR or matrix switcher for each
camera connection. All RJ-45 connectors follow industrystandard EIA/TIA-568B pin-outs.
VDP-MS/MSP Series
Multi-Channel UTP
Video-Data-Power (VDP)
GEC-4VDPC
GEC-16VDPC
GEC-8VPDCHUB
Mid-span Combiners
GEC-16VPDCHUB
Multi-channel UTP Video-Data-Power (VDP) Mid-spanner Combiner Specications
VDP-MS Series (External Powered) VDP-MSP Series (Internal Power)
Part No. GEC-4VDPC GEC-16VDPC GEC-8VPDCHUB GEC-16VPDCHUB
Description
4-channel UTP VDP Mid-span
Combiner - External Powered
No. of Channels 4 16 8 16
Video Format NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM
Frequency DC to 10 MHz DC to 10 MHz DC to 10 MHz DC to 10 MHz
Video
CMRR 60 dB 60 dB 60 dB 60 dB
Insertion Loss
Input Voltage
Output Voltage
Insertion
(to camera)
Camera Power
UTP Video Connector RJ-45 RJ-45 RJ-45 RJ-45
UTP Data Connector
Connectors
UTP Cable
Max. Video Distance
w/Passive Hub/RX
Max. Video Distance
w/VTP-AR4 Series
Max. Video Distance
UTP Distance***
w/ VTP-AR6 Series
Total End-to-End
Operating Power None-Passive operation None-Passive operation None-Passive operation None-Passive operation
Enclosure Extruded Aluminum Extruded Aluminum Aluminum sheet metal Aluminum sheet metal
Dimensions
(W x H x D)
Mechanical
Electrical and
Weight .44 lb (198 g) 1.37 lb (620 g) 14.7 lb (6.65 kg) 22 lb (9.98 kg)
Operating
Temperature
Storage
Temperature
Relative Humidity 0 to 95%, non-condensing 0 to 95%, non-condensing 0 to 95%, non-condensing 0 to 95%, non-condensing
Environmental
*Width dimension including integrated mounting ears is 6.77 in. (17.2 cm)
**Width dimension including integrated mounting ears is 19.8. in. (50.3 cm)
*** End-span VDP operation: Video transmission distance to receiving hub (end to end transmission distance) is limited to the wire gauge installed (AWG) and the operating
voltage and current requirements of the remote camera. Voltage and Current loss calculations for the cable run are recommended in insure proper operation.
Mid-span VDP operation. Video transmission distance can be extended by injecting camera power and PTZ data closer to the remote camera. The distance from remote
camera and the mid-span injector is limited to the wire gauge installed (AWG) and the operating voltage and current requirements of the remote camera. Voltage and
current loss calculations for the cable run are recommended in insure proper operation.
0.3 dB 0.3 dB 0.3 dB 0.3 dB
24/28VAC
(requires external power source)
24/28 VAC @ 1A per channel,
12A aggregated
Terminal blocks with RJ-45
adapter option
100 Ohms (+/- 20%), Unshielded
Twisted-Pair-Category 2-6
(24 AWG minimum)
750 feet 750 feet 750 feet 750 feet
2,000 feet 2,000 feet 2,000 feet 2,000 feet
3,500 feet 3,500 feet 3,500 feet 3,500 feet
4.97* x 1.74 x 1.77 in.
(12.6* x 4.2 x 4.5 cm)
-10°C to +50°C -10°C to +50°C -10°C to +50°C -10°C to +50°C
-30°C to +70°C -30°C to +70°C -30°C to +70°C -30°C to +70°C
16-channel UTP VDP Mid-span
Combiner - External Powered
24/28VAC
(requires external power source)
24/28 VAC @ 1A per channel,
12A aggregated
Terminal blocks with RJ-45
adapter option
100 Ohms (+/- 20%), Unshielded
Twisted-Pair-Category 2-6
(24 AWG minimum)
18** x 1.74 x 1.77 in.
(45.7** x 4.2 x 4.5 cm)
8-channel UTP VDP Mid-span
Combiner - Internal Powered
110/220VAC 110/220VAC
24/28 VAC @ 1A per channel,
12A aggregated
Terminal blocks with RJ-45
adapter option
100 Ohms (+/- 20%), Unshielded
Twisted-Pair-Category 2-6
(24 AWG minimum)
17 x 1.74 x 12 in.
(43 x 4.2 x 30.5 cm)
16-channel UTP VDP Mid-span
Combiner - Internal Powered
24/28 VAC @ 1A per channel,
12A aggregated
Terminal blocks with RJ-45
adapter option
100 Ohms (+/- 20%), Unshielded
Twisted-Pair-Category 2-6
(24 AWG minimum)
17 x 1.74 x 12 in.
(43 x 4.2 x 30.5 cm)
Typical Applications
Short-range Application –750 feet
DVR
Up to 16
Video Channels
Video/Data/Power
UTP – Data & Power
COAX
VDP-ES Series
VDP Receiver Combiner
UTP
VDP-B Series
Balun Combiner
Long-range Application –2,000 feet
UTP – Data & Power
Video Pass-thru
w/ Data & Power
VDP-B Series
Balun Combiner
Long-range Application –3,500 feet
UTP – Data & Power
Video Pass-thru
w/ Data & Power
VDP-B Series
Balun Combiner
UTP
Power
VDP-MS Series – (Ext. P/S)
VDP-MSP Series –(Int. P/S)
UTP
Power
VDP-MS Series – (Ext. P/S)
VDP-MSP Series –(Int. P/S)
VTP-AR4 Series
Active Video Receiver w/ AVC
Video/Data/
UTP
Power
PTZ Data
UTP
VTP-AR6 Series
Active Video Receiver w/ AVC
UTP
Video Pass-thru
PTZ Data
UTP
Up to 16
Video Channels
COAX
DVR
Up to 16
Video Channels
COAX
DVR
North America
T 888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-725-11-20
F 32-2-721-40-47
Latin America
T 561-998-6100
F 561-994-6572
interlogix.com
utcreandsecurity.com
Specications subject to
change without notice.
© 2011 Interlogix, A UTC Fire & Security Company.
All rights reserved.
GE and the GE monogram are trademarks of the
General Electric Company and are under license
to UTC Fire & Security, 9 Farm Springs Road,
Farmington, CT 06034-4065
Ordering Information
VDP-MS Series
GEC-4VDPC 4-CH Video, Data and Power Combiner
GEC-16VDPC 16-CH Video, Data and Power Combiner
VDP-MSP Series
GEC-8VPDCHUB 8-Channel Powered VPD Combiner Hub
GEC-16VPDCHUB 16-Channel Powered VPD Combiner Hub
Optional Accessory
GEC-RPK Rack panel kit supports up to three 4-port Hubs
Note: External power supply must be purchased separately for VDP-MS Series.
Included Accessories
GEC-4VDPC Mounting screws
GEC-16VDPC Built-in mounting brackets for front, rear or wall mount installation
GEC-8VPDCHUB
GEC-16VPDCHUB
Mounting brackets for front, rear or wall mount installation; 8-coax
jumper cables - 2-ft. (60 cm); Molded IEC power cord - 7-ft. (200 cm)
Mounting brackets for front, rear or wall installation; 16-coax jumper
cables - 2-ft. (60 cm); Molded IEC power cord - 7-ft. (200 cm)
003-3285 2011/03 (60364D)
Loading...