Interlogix GEC-16VDPBC Specsheet

UTP Transmission
VDP-ES/ESP Series
Overview
GE’s Multi-Channel VDP Receiver Combiners are now IFS. These Multi-Channel Video-Data-Power (VDP) Receiver Combiners incorporate passive video baluns and also combine PTZ data and power to the camera over a single four-pair UTP cable. This allows simplication of a CCTV installation within a structured wiring environment. These units are designed to be installed at the head-end for VDP transmission of up to 750 feet (228m).
VDP-ES Series
The VDP-ES Series are available in either four, eight or 16-channel congurations. These are passive devices; however, external power is required to inject power through these devices to the UTP cable.
VDP-ESP Series
The VDP-ESP Series are available in either eight or 16-channel congurations and also have built-in eight or 16-channel repeatedly fully-isolated class II 28/24 VAC power supply. Each camera power output, in addition to an auto-reset fuse, is equipped with a 2 amp glass fuse that is accessible from the front panel for extra protection.
Standard Features (all models)
Video
• Integrated Passive Baluns
• NTSC, PAL and SECAM compatible
• 60dB crosstalk and noise immunity
• Supports “up-the-coax” PTZ control
Design
• Combines video, data and power
• No power required for video
• 1U rack-mount or wall-mount congurations
• RJ-45 plug-n-play installation
• 24" coax jumper cables included (8 and 16-ch units only)
• Surge protection
Distance
• Up to 750 feet transmission
Warranty
• Comprehensive Lifetime Warranty
At the camera end, an IFS VDP-B Series Balun Combiner provides video, data and power on separate outputs. The video connections are through BNC connectors to the DVR or matrix switch. The data connections to the DVR are through RJ-45 connector and there is a separate data connection for each camera. All RJ-45 connectors follow industry-standard EIA/TIA-568B pin-outs.
Multi-Channel UTP Video-Data-Power ( VDP) Receiver Combiners
GEC-4VDPBC
GEC-16VDPBC
GEC-8PVPDTCHUB
GEC-16PVPDTCHUB
Multi-channel UTP Video-Data-Power (VDP) Receiver Combiner Specications
VDP-ES Series VDP-ESP Series
Part No. GEC-4VDPBC GEC-16VDPBC GEC-8PVPDTCHUB GEC-16PVPDTCHUB
Description
4-channel UTP VDP Receiver Combiner - External Powered
This unit utilizes 4 passive video
Product Description
No. of Channels 4 16 8 16
Video Format NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM NTSC, PAL, SECAM
Frequency DC to 10 MHz DC to 10 MHz DC to 10 MHz DC to 10 MHz
Video
CMRR 60 dB 60 dB 60 dB 60 dB
Insertion Loss
Input Voltage (from power source)
Power
Camera
Insertion
Output Voltage (to camera)
Coax Connector BNC BNC BNC BNC
Coax Cable 75 Ohm 75 Ohm 75 Ohm 75 Ohm
UTP Connector
UTP Cable
Connectors
Maximum UTP Distance
Operating Power None – Passive operation None – Passive operation None – Passive operation None – Passive operation
Enclosure Extruded Aluminum Extruded Aluminum Aluminum sheet metal Aluminum sheet metal
Dimensions (W x H x D)
Electrical &
Mechanical
Weight 0.54 lb (246 g) 1.75 lb (795 g) 14.7 lb (6.65 kg) 22 lb (9.98 kg)
Operating Temperature
Storage Temperature
Environmental
Relative Humidity 0 to 95%, non-condensing 0 to 95%, non-condensing 0 to 95%, non-condensing 0 to 95%, non-condensing
baluns and combines data and power for transmission to the camera over 4-pair UTP cable. These units are to be used at the head-end.*
0.3 dB 0.3 dB 0.3 dB 0.3 dB
28 VAC Max (requires external power source)
28 VAC Max (requires external power source)
Terminal blocks with RJ-45 adapter option
100 Ohms (+/- 20%) Unshielded Twisted-Pair - Category 2-6 (24 AWG minimum)
750 feet (228 m) 750 feet (228 m) 750 feet (228 m) 750 feet (228 m)
4.97 in.** x 1.74 in., x 1.77 in. (12.6 cm** x 4.2 cm x 4.5 cm)
-10°C to +50°C -10°C to +50°C -10°C to +50°C -10°C to +50°C
-30°C to +70°C -30°C to +70°C -30°C to +70°C -30°C to +70°C
16-channel UTP VDP Receiver Combiner - External Powered
This unit utilizes 16 passive video baluns and combines data and power for transmission to the camera over 4-pair UTP cable. These units are to be used at the head-end.*
28 VAC Max (requires external power source)
28 VAC Max (requires external power source)
Terminal blocks with RJ-45 adapter option
100 Ohms (+/- 20%) Unshielded Twisted-Pair - Category 2-6 (24 AWG minimum)
18 in.*** x 1.74 in. x 1.77 in. (45.7 cm*** x 4.2 cm x 4.5 cm)
8-channel UTP VDP Receiver Combiner - Internal Powered
This unit utilizes 8 passive video baluns and combines data and power for transmission to the camera over 4-pair UTP cable. These units are to be used at the head-end.*
110 VAC or 220 VAC (Built-in internal power supply)
24/28 VAC @ 1A per channel, 8A aggregated
Terminal blocks with RJ-45 adapter option
100 Ohms (+/- 20%) Unshielded Twisted-Pair - Category 2-6 (24 AWG minimum)
17 in. x 1.74 in. x 12 in. (43 cm x 4.2 cm x 30.5 cm)
16-channel UTP VDP Receiver Combiner - Internal Powered
This unit utilizes 16 passive video baluns and combines data and power for transmission to the camera over 4-pair UTP cable. These units are to be used at the head-end.*
110 VAC or 220 VAC (Built-in internal power supply)
24/28 VAC @ 1A per channel, 16A aggregated
Terminal blocks with RJ-45 adapter option
100 Ohms (+/- 20%) Unshielded Twisted-Pair - Category 2-6 (24 AWG minimum)
17 in. x 1.74 in. x 12 in. (43 cm x 4.2 cm x 30.5 cm)
*Camera power is supplied from an external power source to this unit and must be purchased separately.
**8 Width dimension including integrated mounting ears is 6.77 in. (17.2 cm)
***8 Width dimension including integrated mounting ears is 19.8. in. (50.3 cm)
Agency Compliances
•UL
•cUL
•CE
•C-Tick
•WEEE
Typical Applications
VDP-ES Series External Power Required
GEC-16VDPBC
16-Ch VDP Receiver-Combiner
VDP-EPS Series Built-In Internal Power Supply
GEC-16PVPDTCHUB
16-Ch VPD Receiver Combiner-Powered
UTP-750 ft. (228) Max.
UTP-750 ft. (228) Max.
UTP-750 ft. (228) Max.
16 Coax Jumpers
(External Power Source)
DVR
UTP-750 ft. (228) Max.
UTP-750 ft. (228) Max.
UTP-750 ft. (228) Max.
16 Coax Jumpers
DVR
24/28VAC Max.
110 VAC or 220 VAC
Power
Data
Power
Data
Power
Data
Power
Data
Cam #1 12VDC Camera w/ Zoom
Cam #2 Fixed Dome Camera
Cam #3 PTZ Dome Camera
Local Power
Cam #1 12VDC Camera w/ Zoom
Cam #2 Fixed Dome Camera
Cam #3 PTZ Dome Camera
Local Power
North America T 888-437-3287 F 503-691-7566 E sales@ifs.com
Asia T 852-2907-8108 F 852-2142-5063
Australia and New Zealand T 613-9239-1200 F 613-9239-1299
Europe T 32-2-725-11-20 F 32-2-721-40-47
Latin America T 561-998-6100 F 561-994-6572
interlogix.com utcreandsecurity.com
Specications subject to change without notice.
© 2011 Interlogix, A UTC Fire & Security Company. All rights reserved.
GE and the GE monogram are trademarks of the General Electric Company and are under license to UTC Fire & Security, 9 Farm Springs Road, Farmington, CT 06034-4065
Ordering Information
VDP-ES Series
GEC-4VDPBC 4-channel UTP VDP Receiver Combiner - External power*
GEC-16VDPBC 16-channel UTP VDP Receiver Combiner - External power*
VDP-ESP Series
GEC-8PVPDTCHUB 8-channel UTP VDP Receiver Combiner - Powered
GEC-16PVPDTCHUB 16-channel UTP VDP Receiver Combiner - Powered
Optional Accessory
GEC-RPK Rack panel kit supports up to three GEC-4VDPBC units
*External power supplies must be purchased separately.
Included Accessories
GEC-4VDPBC Mounting screws
GEC-16VDPBC Built-in mounting brackets for front, rear or wall-mount installation
GEC-8PVPDTCHUB
GEC-16PVPDTCHUB
Mounting brackets for front, rear or wall-mount installation; 8-coax jumper cables - 2-ft. (60 cm); Molded IEC power cord - 7-ft. (200 cm)
Mounting brackets for front, rear or wall-mount installation; 16-coax jumper cables ­2-ft (60 cm); Molded IEC power cord - 7-ft. (200 cm)
003-3284 2011/03 (60364A)
Loading...