F i b e r T r a n s m i s s i o n P r o d u c t s
(8-Bit) Video Integrated Fiber-Optic Receiver
Overview
The video series fiber transmission products support triple
independent optical transmission of 8-Bit PCM coded video through
three fibers either in multi-mode or single-mode for convenience
and flexibility. Adjustment and maintenance free, these modules are
universally compatible with major CCTV camera manufacturers.
The unit’s unique modular design for in field configuration also
accommodates installation and system growth and delivers long
operating distances of up to 60 Km. Featuring robust construction
well suited for harsh environments, the unit is available in wall mount
configuration. Plug-and-Play design ensures ease of installation
requiring no electrical or optical adjustments.
Standard Features
Video
Non-compressed 8-Bit Digitally Encoded Video Transmission•
Support NTSC & PAL video systems•
No video degradation over max. operating distance •
LEDs
Duplicated LED indicators on the front and rear of the unit for the •
convenience of observation
Optical
Recover three separate channels of non-compressed 8-bit digital •
video and bi-directional data in one module
Network management system for rack communications
Web browser support•
Systems video, audio, data and contact closure •
performance monitoring
System devices and components Transmitters, Receivers, •
Modules, etc. status monitoring and operational management
LAN, Ethernet networking capabilities•
IP addressable•
Alarm activation, execution, message responding and reporting•
Operational level determination and access control •
Network ready for health and connection monitoring•
3-Channel Digital
(8-Bit) Video Integrated
Fiber-Optic Receiver
Specifications
Video
Number of Channels 3 (1 @ fibers)
Color Systems NTSC PAL
I/O Impedance 75 Ohm 75 Ohm
I/O Composite Video Level 1Vp-p ± 5.5 IRE 700mVp-p ± 40 IRE
Sync Amplitude 40± 4 IRE 300± 30 IRE
Burst Amplitude 40± 4 IRE 300± 30 IRE
Bandwidth ≥4.6MHz ≥5.8MHz
Differential Gain <2% <2%
Differential Phase <1 Degree Typical <1 Degree Typical
SNR-CCIR weighted ≥ 53dB ≥ 53dB
Tilt <1 % <1 %
K-factor 1% 1.5%
Signal Indication (Video Presence/ Absence) Green/Red LED lit Green/Red LED lit
Input/output Connectors BNC BNC
Optical
Wavelength 1310
Number of Fiber 3
Tx Output Power:
Single Mode (40Km) 1310nm -9dBm± 3 dBm
Multi-mode (4Km) 1310nm -7dBm ± 3 dBm
Optical Budget:
Multi-mode (62.5μm/125μm) 10dB
Single-mode (9μm/125μm) 14dB
Transmission Distance:
Multi-Mode (Limited by Fiber Bandwidth) 4Km
Single-Mode (Limited by Fiber Bandwidth) 40Km
Fiber Connector (Standard Supply) ST
Power Requirement
12V DC
Supply Voltage
Cord Protection Poly Fuse (1 A)
Current Consumption Max. 500mA
Mechanical
Dimensions or Module H x W x D in mm 25.4 x 158.4 x 231.8
Shipping weight 0.80 kg
Environmental
MTBF >100,000 hours
Operating Temperature -40º C to +75º C
Storage Temperature -40º C to +85º C
Relative Humidity 0 to 95% non-condensing
(Standalone: derived from an external adaptor via the 2-pin
connector at rear of the module. Rack chassis: derived from the
chassis PSU via the 30-pin connector at rear of the module.)
Application Diagrams
Cable connection of FVSM3-RX, FVSML3-RX, FVMM3-RX
(with FVSM1-TX, FVSML1-TX and FVMM1-TX)
Cable connection of FVSM3-RX, FVSML3-RX, FVMM3-RX
(with MFVSM1-TX, MFVSML1-TX and MFVMM1-TX)
FVSM1-TX
FVSML1-TX
FVMM1-TX
FVSM3-RX
FVSML3-RX
FVMM3-RX
MFVSM1-TX
MFVSML1-TX
MFVMM1-TX
FVSM3-RX
FVSML3-RX
FVMM3-RX
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-98-47
32-2-719-98-46
F
Latin America
T 305-593-4301
F 305-593-4300
Specifications subject to
change without notice.
© 2010 General Electric Company
All Rights Reserved
Ordering information
Fiber Type Part
(9/125μm)
(9/125μm For
Long Distance)
(62.5/125μm)
Accessories DFR. 19’ Rack mount chassis purchased separately for housing modules
Options ST type connector is standard
Notes: Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices
Number
(I) Single-mode
FVSM3-RX
(II) Single-mode
FVSML3-RX
(III) Multi-mode
FVMM3-RX
and the fibers within the network. Operating distance of multimode is limited by the characteristics of the
fiber bandwidth
Description Opt. PWR.
3-Channel Digital (8-Bit) Video
Integrated Fiber-Optic Receiver
3-Channel Digital (8-Bit) Video
Integrated Fiber-Optic Receiver
3-Channel Digital (8-Bit) Video
Integrated Fiber-Optic Receiver
Budget
dB
14 40 21
19 60 1
10 4 1
Max.
Distance
Km
No. of
slots
Model Number Key
DF 10 bit rack/module
F 8 bit rack/module
MF 8 bit module only
V Video
D Data
A Audio
CC Contact Closure
SM Single mode
MM Multimode
MF 8 bit module only
L Long distance
D Duplex
Part Number Key
FV M( L °) 3–RX
Optical type
S Single Mode
M Multi Mode
First digit Number of video channels
Second digit Number of audio channels
Third digit Number of data channels
Forth digit Number of contact closures
T Transmitter
R Receiver
2010/04 (61159m)
Loading...