Interlogix FP 2000 Series, FP 1200 Series, FR 1100 Series, FR 1200Series Installation And Commissioning Manual
FP/FR1100/1200/
2000 Series
Analogue addressable fire panels,
repeaters and emulators
Installation and
Commissioning Manual
Revision 6.2: February 2003
www.aritech.com
ARCNET is a registered trademark of Datapoint Corporation.
Aritech is an Interlogix company.
COPYRIGHT
© 2001 Interlogix B.V.. All rights reserved. Interlogix B.V. grants the right to reprint this manual for internal use only. Interlogix B.V.
reserves the right to change information without notice.
CONTENTS
NTRODUCTION
1 I
ENERAL INFORMATION
2 G
2.1 Product codes ..................................................................................................................................... 5
2.2 Design specifications........................................................................................................................... 7
ECHNICAL SPECIFICATIONS
3 T
3.1 General specifications......................................................................................................................... 9
3.2 Panel specifications........................................................................................................................... 11
3.2.1 Standard Outputs ................................................................................................................. 11
3.2.2 Standard Inputs .................................................................................................................... 12
3.2.3 Power Supply Characteristics............................................................................................... 12
3.2.4 Panel Operation.................................................................................................................... 14
3.2.5 Environmental....................................................................................................................... 15
OUNTING INSTRUCTIONS
4 M
4.1 FP/FR12xx ........................................................................................................................................ 15
4.1.1 Panel dimensions ................................................................................................................. 15
4.1.2 Mounting instructions............................................................................................................ 16
4.1.3 Panel & repeater layout ........................................................................................................ 17
4.2 FP2xxx .............................................................................................................................................. 18
4.2.1 Panel dimensions ................................................................................................................. 18
4.2.2 Mounting instructions............................................................................................................ 19
4.2.3 Panel layout.......................................................................................................................... 21
4.2.4 Repeater layout .................................................................................................................... 22
OOP DESIGN
5 L
5.1 Typical configuration ......................................................................................................................... 23
5.2 Suitable cable types .......................................................................................................................... 25
IELD CONNECTIONS
6 F
6.1 Loop, output and input connections .................................................................................................. 26
6.1.1 FP12xx ................................................................................................................................. 26
6.1.2 FP2xxx.................................................................................................................................. 27
6.2 Connections ...................................................................................................................................... 28
6.2.1 Loop connections ................................................................................................................. 28
6.2.2 Programmable relay ............................................................................................................. 30
6.2.3 Supervised outputs A ........................................................................................................... 31
6.2.4 Relay outputs B .................................................................................................................... 31
6.2.5 Supervised inputs IN5 - IN8.................................................................................................. 33
6.2.6 Auxiliary inputs (FEP2000 only)............................................................................................ 34
6.2.7 Connection of dual tone siren AS263/AS264....................................................................... 35
6.3 Communication port connections (all models) .................................................................................. 36
6.3.1 Current loop.......................................................................................................................... 36
6.3.2 RS232 ports.......................................................................................................................... 37
6.4 Power supply connections................................................................................................................. 38
6.4.1 24 V version FR2xxx models................................................................................................ 38
6.4.2 230 V version (FP/FR1xxx/FR2000 models – except FP1216EN & FP1264) ..................... 39
6.4.3 FP1216EN & FP1264 Power supply connections ................................................................ 42
6.4.4 230 V version (FP2xxx models) ........................................................................................... 43
6.5 Installing a modem ............................................................................................................................ 45
6.6 Network connections......................................................................................................................... 47
6.6.1 NC2011/NC2051 ARCNET network cards........................................................................... 47
6.6.2 NE2011/NE2051 ARCNET network extension cards........................................................... 48
6.6.3 FP/FBP/FRL700 Serial communication network (LON2000) ............................................... 49
6.7 LCD contrast ..................................................................................................................................... 50
6.7.1 FP/FR2xxx............................................................................................................................ 50
............................................................................................................................................ 4
............................................................................................................................... 5
........................................................................................................................ 9
......................................................................................................................... 15
(FP12XX/FP2
XXX
/FB2X00
ONLY
) ........................................................................................ 23
................................................................................................................................. 26
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 1
6.7.2 FP/FR1xxx............................................................................................................................ 50
OUNTRY DEPENDENT SELECTIONS
7 C
............................................................................................................ 51
7.1 Language selections ......................................................................................................................... 51
7.1.1 FP/FR1xxx............................................................................................................................ 51
7.1.2 FP/FR2xxx............................................................................................................................ 51
7.2 Operation mode................................................................................................................................. 51
7.3 Language inserts............................................................................................................................... 51
OMMISSIONING A
8 C
FP2000 S
ERIES FIRE PANEL
.......................................................................................... 52
8.1 Before switching on........................................................................................................................... 52
8.2 Procedure for switching on................................................................................................................ 53
PPENDIX
A
SWITCH SETTINGS ON HOST
A: DIP
PSU
BOARD
(FP/FR2
XXX
)........................................................... 55
PPENDIX
A
PPENDIX
A
OFTWARE SELECTABLE OPTIONS
B: S
PERATION MODES
C: O
...................................................................................................................... 57
(FP/FR1
XXX
) ........................................................................... 56
2 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
LIST OF FIGURES
Figure 1: Panel dimensions ........................................................................................................................ 15
Figure 2: Top/bottom cable entries............................................................................................................. 16
Figure 3: Panel layout................................................................................................................................. 17
Figure 4: Panel dimensions (cabinet size A) .............................................................................................. 18
Figure 5: Mounting instructions................................................................................................................... 19
Figure 6: Cable entries................................................................................................................................ 20
Figure 7: Panel layout................................................................................................................................. 21
Figure 8: Repeater layout ........................................................................................................................... 22
Figure 9: Class "A" return loop.................................................................................................................... 23
Figure 10: Class "A" return loop with tee offs .............................................................................................. 23
Figure 11: Class "B" Single direction loop (Star configuration)..................................................................... 24
Figure 12: Class B single direction loop with tee offs ................................................................................... 24
Figure 13: Position of inputs, loops and relay connections........................................................................... 26
Figure 14: Position of inputs, loops and relay connections........................................................................... 27
Figure 15: Class A loop connection.............................................................................................................. 28
Figure 16: Location of Class A - Class B jumpers ........................................................................................ 28
Figure 17: Class B loop connection.............................................................................................................. 29
Figure 18: Class AB loop connection............................................................................................................ 29
Figure 19: Programmable relay connections................................................................................................ 30
Figure 20: Supervised relay output’s connection on SD2000 common I/O board ........................................ 31
Figure 21: Two configurations for relay outputs 1-3 B.................................................................................. 31
Figure 22: Two configurations for relay output 4 B....................................................................................... 32
Figure 23: Location of jumpers on sounder board........................................................................................ 32
Figure 24: Supervised inputs connections.................................................................................................... 33
Figure 25: Auxiliary inputs............................................................................................................................. 34
Figure 26: Dual tone siren connections ........................................................................................................ 35
Figure 27: Current loop terminal connections............................................................................................... 36
Figure 28: FP/FR2xxx power supply connections (24 V version)................................................................. 38
Figure 29: FP/FR12xx/FR2000 connecting mains-to-mains terminal block ................................................. 39
Figure 30: FP/FR12xx power supply and fault relay connections................................................................. 40
Figure 31: FP/FR12xx power supply’s fault relay connections ..................................................................... 41
Figure 32: FP1216EN & FP1264 power supply and transformer connections ............................................. 42
Figure 33: FP2xxx power supply and associated connections (230 V version)............................................ 43
Figure 34: Modem MOD2000 interconnection diagram................................................................................ 46
Figure 35: Network interface and associated connection............................................................................. 47
Figure 36: NE2011 network extension module............................................................................................. 48
Figure 37: Mounting position of LON2000 board.......................................................................................... 49
Figure 38: FP1xxx/2xxx Lon port terminal connections................................................................................ 49
Figure 39: Adjustment of the LCD viewing angle.......................................................................................... 50
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 3
1 I
NTRODUCTION
The purpose of this manual is to provide assistance during the installation and
commissioning of the FP/FR1100/1200/2000 Series fire panels, and repeaters/emulators.
Please note that the manual is intended as a guide only and is not to be used to replace
any local building and/or wiring codes.
Other manuals available are:
1. Aritech 900 Series Detectors Installation Manual
2. Aritech 2000 Series Detectors Installation Manual
3. FP1200/2000 Reference Guide
4. FP2000 Series Network Configuration Guide
5. FP1200/2000 End User Manual
Warning
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
4 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
2 GENERAL INFORMATION
2.1 Product codes
FIRE PANELS:
Max. nr.
Firepanel
FP1200-00 0 4A/4B 126/128 Apollo No 365x444x112 8
FP1200-01 0 2A/2B 64/128 Sentrol No 365x444x112 8
FP1200-02 0 2A/2B 64 Sentrol No 365x444x112 8
FP1216 1xZE2016 2A/4B 126/128 Sentrol No 365x444x112 8
FP1216EN 1x ZE2016 2A/4B 126/128 Sentrol No 440x444x112 9
FP1264 1xZE2064 2A/4B 126/128 Sentrol No 440x444x125 9
FP2416 1xZE2016 2A/4B 126/128 Sentrol Yes 609x441x109 11
FP2464 1xZE2064 2A/4B 126/128 Sentrol Yes 609x441x109 11
FP2432 2xZE2016 4A/8B 126/128 Sentrol No 609x441x109 11
FP24128 2xZE2064 4A/8B 126/128 Sentrol No 609x441x109 11
FP2864 4xZE2016 8A/16B 126/128 Sentrol Yes 804x441x109 15
FP28255 4xZE2064 8A/16B 126/128 Sentrol Yes 804x441x109 15
FB2400 0 4A/8B 126/128 Sentrol No 609x441x109 11
FB2800 0 8A/16B 126/128 Sentrol No 804x441x109 15
Max. nr. of
zone cards
Max. nr.
of loops
of
detectors
/ loop
Default
detector
Internal
printer
Cabinet Size
(mm)
Approx.
weight (kg)
(without
batteries)
REPEATERS / EMULATORS:
Repeater/
Emulator
Panel
FR1200 0 No 365x444x
FR2000 0 No 365x444x
FR2032 2xZE2016 No 609x441x
FR20128 2xZE2064 No 609x441x
FR2064 4xZE2016 Yes 804x441x
FR20255 4xZE2064 Yes 804x441x
FM808/816/
832/864
FR808 N/A No 320x315x90 Current Loop 230 VDC 2
FR824 N/A No 516x346x80 Current Loop 230 VDC 8
Max. nr. of
zone cards
0 No Mimic only Current Loop 24 VDC No cabinet
Internal
printer
Cabinet Size
(mm)
112
112
109
109
109
109
Connected to
FP1200/ 2000
NC2011/
NC2051
NC2011/
NC2051
NC2011/
NC2051
NC2011/
NC2051
NC2011/
NC2051
NC2011/
NC2051
Voltage
Source
230 VAC 8
230 VAC 8
24 VDC 11
24 VDC 11
24 VDC 15
24 VDC 15
Approx.
weight (kg)
(without
batteries)
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 5
Repeater/
Emulator
Panel
FR832 N/A No 516x346x80 Current Loop 230V DC 8
FBP700-D 0 No 240x320x60 LON2000 24 VDC 1.5
FBP700-S 0 No 240x320x60 LON2000 24 VDC 1.5
FRL700 0 No 240x320x60 LON2000 24 VDC 1.5
RP2032 0 No 397x290x64 Current Loop 24 VDC 3
UN2000 0 No 290x145x80 NC/NE2011 230 VAC 1.5
Max. nr. of
zone cards
Internal
printer
Cabinet Size
(mm)
Connected to
FP1200/ 2000
Voltage
Source
Approx.
weight (kg)
(without
batteries)
OPTIONS:
Compatibility with
Extra
Modules
LC2002 Loop driver extension • • • •
LON2000 LON protocol
Description
converter
FP1216EN/
FP1216
2416/2432/
2864
• • • • • • •
FP1264
/ 2464/
24128/
28255
FB2x00 FR1200
FR2000
/ 2032/
2064
FR2012
20255
8/
MOD2000 Modem • • • • • •
NA2004 4-way network
NC2011 Network card - RS485 • • • • • • •
NC2051 Network card - optical • • • • • • •
NE2011 Network extension
NE2051 Network extension
PE2485 French CMSI interface •* •* • • •
PR2000/
PR2011
RB2016 16 programmable
SD1200 3 output sounder
SD2000 4 input/8 output
amplifier
card - RS485
card – optical
Internal printer (40
column impact printer)
relay board
board
sounder board
• • • • • •
• • • • • • •
• • • • • • •
•** •** •* •*
• • • •
•
• • •
VdS2000 German sounder
ZE2016 16 zones LED
board
extension
6 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
•
• • •
Compatibility with
Extra
Modules
ZE2064 64 zones LED
Description
extension
* Excludes the FP1200 series of firepanels
** Option on FP2416/2464, FP2864/28255 & FR20255 only
MODULE VARIATION:
Board Product used in Variation
FEP1200 FP11xx/12xx FEP1200 – 0 x Auxiliary inputs
FEP2000 FP2xxx/FB2x00 FEP2000 – 4 x Auxiliary inputs
FC1200 FP11xx/12xx & FR12xx FC1200 – 1 x DB9 port, Real Time Clock
FC2011 FP2xxx/FB2x00 & FR20xx FC2011 – 2 x DB9 ports, Real Time Clock
LCD1200 FP11xx/12xx & FR12xx LCD1200 – No LCD backlight
LCD2000/2011 FP/FR2xxx LCD2011 – LCD backlight
FP1216EN/
FP1216
2416/2432/
2864
• •
FP1264
/ 2464/
24128/
28255
without battery backup
with battery backup
FB2x00 FR1200
FR2000
/ 2032/
2064
FR2012
8/
20255
SOFTWARE:
Software Package Description
PCM2000 Maintenance Manager
PCC2000 FPConfig – Configuration Software (up/download)
PCG2000 Graphical User Interface
2.2 Design specifications
The FP1100/1200/2000 series fire panels are designed to comply with the requirements
of EN54-2 (control and indicating equipment) and EN54-4 (power supply equipment).
The panels have the following options with requirements according to EN54-2:
•
Output to fire alarm devices
•
Output to fire alarm routing equipment (according to DIN VDE0833)
• Output to fire protection equipment (according to VdS-directive)
• Delays to outputs
• Coincidence detection
• Alarm counter
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 7
• Fault/disablements from addressable points
• Output to fault warning routing equipment
•
Standardised input/output interface (according to DIN 14661)
•
Test condition
•
Total loss of power supply (option)
8 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
3 TECHNICAL SPECIFICATIONS
3.1 General specifications
Loop capacity:
• Every loop PCB (LC2002) can be configured as two class A loops or four class B
loops. (Except FP1200-00 2A/4B or 4A/4B; FP1200-01 2A/2B; FP1200-02 2A/2B)
• Addressable devices per loop: 126 (900 Series) or 128 (2000 Series)
• Maximum 1008 (900 Series) or 1024 (2000 Series) addressable devices per panel
• Maximum eight loops per panel (FP2000 range only)
• Loop overload: >500 mA
•
Loop operating load: 100 mA maximum
Zone capacity:
•
16 or 64 zones (expandable to 32/128, 48/192 or 64/255 zones in cabinet size B)
•
112 zones for control purposes
LCD screen:
•
Backlit alphanumeric 8 x 40 character LCD
Indicators:
• General indicators
Fire - 2 x LED - Red
Fault - 1 x LED - Amber
Disable - 1 x LED - Amber
Supply fault - 1 x LED - Amber
System fault - 1 x LED - Amber
Processor running - 1 x LED - Green
Supply On - 1 x LED - Green
• Control indicators
Silence buzzer - 1 x LED - Amber
Disable - 1 x LED - Amber
Test - 1 x LED - Amber
Third source test - 1 x LED - Amber
• Sounders indicators
Sound - 1 x LED - Red
Delay On - 1 x LED - Amber
Delay Off - 1 x LED - Amber
Fault/Disable - 1 x LED - Amber
Silence - 1 x LED - Amber
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 9
• Fire brigade indicators
Signal - 1 x LED - Red
Delay On - 1 x LED - Amber
Delay Off - 1 x LED - Amber
Fault/Disable - 1 x LED - Amber
Stop fire brigade - 1 x LED - Amber
• Zone monitoring indicators
Fire - 16/64 x LED - Red (expandable to 32/128, 48/192 or
64/255)
Fault - 16/64 x LED - Amber (expandable to 32/128, 48/192
or 64/255)
•
Indicators related to network facilities
All - 1 x LED - Amber
Panel - 1 x LED - Amber
Membrane keyboard:
1, 2, 3, 4, 5, 6, 7, 8, 9, 0, A .. Z
General control keys:
Silence buzzer
Reset
Disable
Test
Third source test
Sounders control:
Sound
Delay On/Delay Off
Disable
Silence
Fire brigade control:
Signal
Delay On/Delay Off
Disable
Stop fire brigade
Control keys related to network facilities (Excludes FP12xx range):
All
Panel
Control key switch:
Prevents unauthorised resetting and programming of the fire panel.
10 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
Tamper switch (FP2000 Range only):
Fitted to the inside of the fire panel door to record any entry to the cabinet.
Third source (when implemented on the FP2000 range only):
Test button and LED to test total loss of power supply.
Communication ports:
•
2 x DB-9 serial port (set-up, upload/download, internal printer (where applicable),
graphics, remote operation/graphic package)
• 1 x current loop (to connect repeaters and fireman’s panels)
Current Loop:
• Maximum 15 devices
•
Maximum 1 km between 2 current loop devices
•
Aritech FM800 / FR800 - German fire brigade panel (according to DIN 14661) can be
connected.
•
Cable capacitance max. 150 nF
3.2 Panel specifications
3.2.1 Standard Outputs
Standard Outputs
(All standard outputs are
located on the sounder
board.)
OUT 1:
Output to alarm devices
(Sounders)
OUT2:
Output to fire routing
equipment (Fire brigade)
OUT3:
Output to fire protection
equipment
OUT4:
Output to fault warning
routings equipment
FP/FR1xxx & FR2000
(
FP1100 and FP1216 only;
FP1200 optional – SD1200
board used)
A: 24 V – 100 mA supervised*
(Supervision at 5V max.)
B: 3K3/680 Ohm switched
output
A: 24 V – 100 mA supervised*
(Supervision at 5 V max.)
B: 3K3/680 Ohm switched
output
A: 24 V – 100 mA supervised*
(Supervision at 5 V max.)
B: 3K3/680 Ohm switched
output
A: 24 V – 100 mA supervised*
(Supervision at 5 V max.)
B: 3K3/680 Ohm switched
output
FP1216EN & FP1264
(SD2000 board)
A: 24 V - 0.8 A
supervised (Supervision
at 5 V max.)
B: 3K3/680 Ohm
switched output
A: 24 V - 0.8 A
supervised (Supervision
at 5 V max.)
B: 3K3/680 Ohm
switched output
A: 24 V - 0.1 A
supervised (Supervision
at 5 V max.)
B: 3K3/680 Ohm
switched output
A: 24 V - 0.1 A
supervised (Supervision
at 5 V max.)
B: 3K3/680 Ohm
switched output
FP/FR2xxx
(FP2xxx only -
SD2000 board used)
A: 24 V - 0.8 A
supervised (Supervision
at 5 V max.)
B: 3K3/680
output
A: 24 V - 0.8 A
supervised (Supervision
at 5V max.)
B: 3K3/680 Ohm
switched output
A: 24 V - 0.1 A
supervised (Supervision
at 5 V max.)
B: 3K3/680 Ohm
switched output
A: 24 V - 0.1 A
supervised (Supervision
at 5 V max.)
B: 3K3/680 Ohm
switched output
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 11
Standard Outputs
(All standard outputs are
located on the sounder
board.)
OUT5 – OUT8:
4 programmable relays
(Three terminals each:
COM - NO – NC)
FP/FR1xxx & FR2000
(
FP1100 and FP1216 only;
FP1200 optional – SD1200
board used)
Maximum switching current: 2 A
@ 24 VDC
Maximum power rating:
50 W DC
250 VA
FP1216EN & FP1264
(SD2000 board)
Maximum switching
current:
2 A @ 24 V DC
Maximum power rating:
50 W DC
250 VA
FP/FR2xxx
(FP2xxx only -
SD2000 board used)
Maximum switching
current:
2 A @ 24 VDC
Maximum power rating:
50 W DC
250 VA
* The maximum specified current of 100 mA for Output 1 and Output 2 can be exceeded as long as the total
current drawn by the outputs (1-4) is limited to 400 mA.
3.2.2 Standard Inputs
Standard Inputs
Sounder card 4 x supervised inputs
FEP board (FP2xxx and
FB2x00 only)
FP/FR1xxx & FR2000
(FP1100 and FP1216
only; FP1200 optional –
SD1200 board used)
(inputs 1-4)
3.3 kOhm termination
4 x auxiliary inputs
FP1216EN & FP1264
(SD2000 board)
4 x supervised inputs
(inputs 1-4)
3.3 kOhm termination
FP/FR2xxx
(FP2xxx only – SD2000
board used)
4 x supervised inputs
(inputs 1-4)
3.3 kOhm termination
15 VAC or 20-28 VDC
3 mA
3.2.3 Power Supply Characteristics
Power Supply
Characteristics
Input 230 VAC (+10%, -
Output Aux. Power:
Supervisory - Mains fail
FP/FR1xxx &
FR2000
15%)
50 Hz (±10%)
50 VA
21 – 28 VDC
24 V standby battery
19-27.5 VDC, 100
mA (max)
Modem: 5 VDC
(±0.1V), 75mA (max)
Battery charge: 27.6
VDC (±0.2 V) @ 25
°C, 300 mA (max)
- Battery disconnect
FP1216EN &
FP1264
230 VAC (+10%, 15%)
50 Hz (±10%)
220 VA
21 – 28 VDC
24 V standby battery
Aux. Power: 19-27.5
VDC, 100 mA (max)
Modem: 5 VDC
(±0.1V), 75 mA
(max)
Battery charge:
27.6 VDC (±0.2 V) @
25 °C, 1.6 A (max)
- Mains fail
- Battery disconnect
FP/FR2xxx
230 VAC (±15%)
50 Hz (±10%)
200 VA
21 – 28 VDC
24 V standby battery
Auxiliary Voltage:
20.5-28 V
27.6V DC battery
charge voltage, 4A
total (battery charge
and aux. with or
without batteries.)
- Mains fail
- Battery disconnect
FR2032/20128
FR2064/20255
21 – 28 VDC
24 V standby battery
- Mains fail
- Charger fail
12 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
Power Supply
Characteristics
Fuses AC fuse – 0.8 A,
Maximum current
drawn from the
primary input
Maximum output
ripple voltage
Fault Relay
(Configuration
depended on jumper
setting – refer to
section 6.4.2.2.)
FP/FR1xxx &
FR2000
- Battery flat
- Flat battery cut-out
- Earth fault
- Auxiliary supply
fault
250 V, T
(20 mm STD fuse)
250 mA 1 A 1 A 0.3 A (no options
± 300 mV ± 300 mV ± 300 mV
Maximum switching
current:
2A @ 24 VDC
Maximum power
rating:
50 W
FP1216EN &
FP1264
- Battery flat
- Flat battery cut-out
- Earth fault
- Auxiliary supply
fault
AC fuse – 2 A,
250 V, T
(20mm STD fuse)
Maximum switching
current:
2 A @ 24VDC
Maximum power
rating:
50 W
FP/FR2xxx
- Battery flat
- Flat battery cut-out
AC fuse – 2 A
(20 mm STD fuse)
Aux. Output – 5 A
(20 mm STD fuse)
Battery fuse – 5 A
(20 mm STD fuse)
- -
FR2032/20128
FR2064/20255
Fuse – 1 A
(20 mm STD fuse)
installed)
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 13
3.2.4 Panel Operation
Battery operation - Normal operation
(No mains power)
Current required by system 200 mA (max) 200 mA (max) 200 mA (max)
Loop current
- 2 loops
- 127 devices/loop @ 340 µA/device (DP951)
Auxiliary current 0 mA 0 mA 0 mA
Total normal current 286 mA 200 mA 286 mA
FP12XX FR1200/FR2000 FP1216EN & FP1264
86 mA
0 mA
86 mA
Battery Operation - Alarm Operation
(No mains power)
Normal current (as above) 286 mA (max) 200 mA (max) 286 mA (max)
Extra loop current (20 x LED @ 4 mA) 80 mA 0 mA 80 mA
Sounders (Sounder board: Outputs 1-4) 200 mA 0 mA 200 mA
Total alarm current 566 mA 200 mA 566 mA
FP12XX FR1200/FR2000 FP1216EN & FP1264
Normal Operation FP2416/2464 & FP2432/24128 FP2864, FP28255
Mains load (maximum) 200 VA 200 VA
Total output current (27.6 V) 4 A 4 A
Battery capacity I
Battery capacity (maximum) 69 AH 69 AH
Required battery charging current
(Maximum battery capacity)
Current required by system (I
Available auxiliary current 0.45 A 0.15 A
= 0 (72H standby) 36 AH 58 AH
AUX
3.05 A 3.05 A
)* 0.5 A 0.8 A
SYS
Alarm Operation FP2416/2464 & FP2432/24128 FP2864, FP28255
Mains load (maximum) 200 VA 200 VA
Total output current (27.6 V) 4 A 4 A
Required battery charging current
(Maximum battery capacity)
Current required by system 0.6 A 1 A
Available auxiliary current 3.4 A 3 A
0 A 0 A
*I
calculated at 252 x 900 series ionisation detectors (FP2416/64) 1008 x 900 series ionisation detectors
SYS
(FP2864/255)
Charging current based to charge batteries up to 80% in 24 hours at 75% efficiency
14 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
3.2.5 Environmental
Environmental FP/FR1xxx & FR2000
Enclosure protection IP54 IP54 IP54
Temperature
Operational: -5 ºC to +40 ºC
Storage: -20 ºC to +60 ºC
FP1216EN & FP1264
Operational: - 5 ºC to +40 ºC
Storage: -20 ºC to +60 ºC
Operational: - 5 ºC to +40 ºC
Storage: -20 ºC to +60 ºC
4 MOUNTING INSTRUCTIONS
4.1 FP/FR12xx
4.1.1 Panel dimensions
Figure 1: Panel dimensions
FP/FR2xxx
"
All dimensions are in mm.
FP1200/FP1216/FR1200/FR2000: 365 X 444 X 112 (H X W X D) mm
FP1216EN/FP1264: 440 X 444 X 125 (H X W X D) mm
FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 15
4.1.2 Mounting instructions
Figure 2: Top/bottom cable entries
1. Panel front A. Bottom view
2. Rear mounting surface B. Top view
3. Panel top C. Rear panel view
4. Panel bottom
5. Cable entries 20 mm
6. Mounting holes 5 mm
16 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
1
440 mm for the FP1216EN & FP1264
2
Not applicable to FP1216EN & FP1264
Loading...