Interlogix FP1101 Specsheet

GE

FP1101 Fiberpak™ Video Link

Security

Overview

The IFS Fiberpak™ FP1101 fiber optic transmission kit
includes everything you need to transmit a fixed CCTV
signal on one multimode optical fiber. The kit includes
one mini-transmitter designed for direct mounting onto
the camera’s BNC connector for easy installation. The
transmitter can also fit inside most camera housings. A
BNC feed-through connector is included when connecting
the module directly to coaxial cable. The included receiver
features Automatic Gain Control (AGC) that automatically
maximizes contrast to ensure a consistent quality video
signal. In addition the kit includes a 24VAC adapter for
direct use with 24VAC camera power supplies. A wall
mounted AC transformer for the receiver is included as
well as a complete installation and operations manual.
FiberPak™ Videolinks’ Plug-and-play design and included
accessories make selecting the right fiber optic modules
for your installation easy.

IFS Fixed Video Transmission Kit

Standard Features

• AM Video Transmitter

• NTSC, PAL, SECAM Compatible

• Power Supplies and Installation Manuals Included

• BNC Feed-through Connector Included for
Connecting to Coaxial Cable

• No In-field Electrical or Optical Adjustments Required

• 24VAC Adapter available for Direct Use with 24VAC
Camera Power Supply.

• AM Receiver with Full Range Automatic Gain Control
(Installed at Monitor Location)

• Power Status Indicating LED to Monitor System Performance

• Full Color Compatibility

• Direct Camera Mountable

• Distances up to 2.5 miles (4 km) without Repeaters

Application Examples

Compatible with:

• Kalatel® Video and One-Way RS-422 Data

• Pelco® Video and One-Way Type “P” Data

• Pelco® Video and One-Way Type “D” Data

• Sensormatic AD® Video and One-Way Manchester Data

• Vicon® Video and One-Way Modupulse Data

Fixed Video
Transmission Kit

Transmit a fixed CCTV signal on
one multimode optical fiber.

• Comprehensive Lifetime Warranty

VT1101M

Video

(Coax)

1 Fiber

62.5/125µm MM

mounted to back

of camera

VR1101M

up to 2.5 miles

(4 km)

ifs

ifs

International

Fiber

Systems

Incorporated

203.426.1180

Specifications

Video

Video Input: 1 volt pk-pk (75 ohms)
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <5%
Differential Phase: <5°
Tilt: <1%
Signal-to-Noise Ratio (SNR): 60 dB

Wavelength 850 nm, Multimode

Number Of Fibers 1

Connectors

Optical: ST
Power and Data: Terminal Block with Screw Clamps
Video and Sync: BNC (Gold Plated Center-Pin)

Electrical & Mechanical

Power:
Transmitter: 24 VAC C.T. @ 50 mA
Receiver: 24 VAC @ 150 mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
VT1101M: 2.5 x 1.6 x 1.0 in., 16.3 x 10.2 x 2.5 cm
VR1101M: 3.5 x 4.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

Multimode

62.5/125µm**

Part Number Optical Pwr. Budget Max. Distance*

FP1101 1

Description

FiberPak™ Video Transmitter (850 nm)
FiberPak™ Video Receiver (850 nm)

PS-1101M 24 VAC Adapter (Available)

Accessories♦

PS-12VDC 12 Volt DC Plug-in Power Supply (Optional - Purchased Separately)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.

Fibers Required

14 dB
20 dB (-HP Option)

2.5 miles (4 km)

3.5 miles (5.5 km)