Interlogix ES3002-4P-4T Specsheet

Network Transmission

ES3002-4P-4T

8-Port Unmanaged Ethernet Switch
with 4-Port PoE-at Injector

OVERVIEW

The IFS® line of economy series (ES) Ethernet switches provide Gigabit
Ethernet (10/100/1000Mbps) transmission combined with a built-in
4-Port PoE injector providing up to 30W per port with a total PoE
power budget of 60W.

The IFS ES3002-4P-4T is a cost-effective switch for a small IP video
network. This switch is designed to provide non-blocking wire­speed performance and easy plug-and-play installation for desktop
deployment of IP cameras, IP intercom, wireless access points (WAP)
and other Ethernet applications.

This switch utilizes an internal power supply versus an external wall­mount transformer thus providing more reliable PoE performance
and a higher total PoE power budget. In addition, the ES3002-4P-4T
utilizes energy saving technology that reduces energy usage.

The ES3002-4P-4T incorporates two advanced Green Networking
technologies:

• The Idle Mode Link Down Power Saving feature complies with
the IEEE 802.3az Energy Efficient Ethernet (EEE) standard to
automatically lower power for a given port when it is not connected.

• The Intelligent Power Scaling Technology actively determines the
appropriate power level based on the cable length.

These two green features can reduce overall power consumption, which
makes a significant contribution to energy savings.

STA N DAR D FE ATU RES

RJ-45 Ports

• Auto MDI/MDI-X

• Auto-negotiation

• 4-ports 10/100M/1000Mbps Ethernet (PoE-at)

• 4-ports 10/100/1000Mbps Ethernet (non-PoE)

High Performance Architecture

• Unmanaged plug and play installation requires no programming

• Store-and-Forward switching architecture with wire-speed
filtering and forwarding rates

• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x PAUSE frame-flow control (full-duplex)

• Integrated address-lookup engine supports 1K absolute
MAC addresses

• Supports CSMA/CD Protocol

• Automatic source-address learning and aging

• Support to handle Jumbo Packets (9K Bytes)

Power over Ethernet (PoE)

• Up to 4 IEEE 802.3af devices powered

• Complies with IEEE 802.3at Power over Ethernet End-Span PSE

• Supports up to 30W (per port)

• Auto detect powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 328 ft. (200m - 10BaseT mode only)

• 60W total power budget

Designed for Efficient Operation

• Metal enclosure

• Built-in 65 watt power supply

• Advanced Green Networking technologies:

—Idle Mode Link Down Power Saving
—Intelligent Power Scaling technology

• Fanless design

• 0~50ºC operating environment

Warranty

• 3-year limited warranty

interlogix.com/ifs

ES3002-4P-4T

1.65 in.

(42mm)

5.23 in.

8-Port Unmanaged Ethernet Switches
with 4-Port PoE-at Injector

Specifications

RJ45 Ports

10/100Base-TX Connectors RJ-45 (4) PoE and (4) non-PoE (8 total)

Port Configuration Auto MDI/MDI-X

Port Speed Auto-negotiate

Energy-saving Technology

Link down power saving
Intelligently scales power based on cable length

Ordering Information

ES3002-4P-4T

Included
Accessories

8-Port Unmanaged Gigabit Ethernet Switch w/4-Port
PoE-af Injector

User’s Manual, AC Power Cord

PoE

PoE Standard

IEEE 802.3at Power over Ethernet / PSE

Dimensional Diagram

PoE Power Supply Type End-Span

PoE Power Output Per Port 53VDC / 600 mA (30w max.)

Powered Devices (PD)
Class 1, 2 or 3

Powered Devices (PD)
Class 4

4

2

Power Pin Assignment 1/2(+), 3/6(-)

Total PoE Power Budget 60 watts

(133mm)

Switch Performance

Switch Architecture Store-and-Forward

Switch Fabric (non-blocking) 16Gbps

Throughput (Packet per second) 11.9Mpps@64bytes

Address Table 4K entries

Maximum Frame Size 9K Bytes

Flow Control

Back pressure for Half-Duplex,
IEEE 802.3x PAUSE Frame for Full-Duplex

LED Indicators

8-port GigE Ethernet with 4-port PoE Injector Unmanaged Switch

ES3002-4P-4T

8.48 in.

(215.5mm)

PoE

Extended

MAX

ON

PWR

Standard

PoE

PoE

1000

PoE In-UseLNK

ACT

10/100

LNK

ACT

Power Power On

Ports 1-8 LNK/ACT

Ports 1-4 PoE In-use, LNK/ACT

PoE Max On when Max PoE power is reached

Electrical & Mechanical

Supply Voltage AC 100 to 240V, 50/60Hz, 1.5A

Power Consumption 65 watts max./221 BTU max.

Enclosure Metal

Dimensions (in/mm) (W x D x H) 8.48 x 5.23 x 1.65 in. (215.5 x 133 x 42mm)

Weight (lbs./kg) 1.96 lbs./0.89kg

Typical Application

ES3002-4P-4T

IP PoE Camera

IP PoE Camera

Cat 5e Cable

100m (328 ft.) Max.

VMS

Software

NVR

Environmental

MTBF > 100,000 Hrs @ 25°C

IP PoE Camera

Operating Temperature 0°C~50°C

Storage Temperature -40°C~70°C

Relative Humidity 0%~95% (non-condensing)

Standards Compliance

IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX

IEEE Standards

IEEE 802.3ab Gigabit Ethernet (ES3001 only)

IP PoE Camera

Cat 5e Cable

100m (328 ft.) Max @ 100BaseT

200m (656 ft.) Max @ 10BaseT

IEEE 802.3x Flow Control and Back pressure
IEEE 802.3-at PoE (30W)

EIA/TIA-568 Standards 100-ohm UTP Cat. 5 or better (100meters, max.)

Regulation FCC Part 15 Class A, CE

Specifications subject to change without notice.

interlogix.com

© 2017 United Technologies Corporation.

All rights reserved.

All trademarks are the property of their respe ctive owners.

Interlogix is part of UTC Climate, Controls & Security,

a unit of United Technologies Corporation.

2017/10 (GS P-2426)