Interlogix ES3001-4P-4T Specsheet
Switches
8-Port Unmanaged Ethernet Switch
8-Port Unmanaged Ethernet Switch
The IFS line of economy series (ES) Ethernet switches provide a
balance between cost and performance. The ES3001-4P-4T is a
Gigabit Ethernet (10/100/1000Mbps) switch combined with a built-in
4-Port PoE injector providing up to 15.4 W per port with a total PoE
power budget of 55 watt.
The IFS ES3001 is a cost-effective switch for smaller independent
networks. These switches are designed to provide non-blocking
wire-speed performance and easy plug-andplay installation for
desktop deployment of IP cameras, IP intercom, wireless access
points (WAP) and other Ethernet applications.
The IFS ES Series switches utilize an internal power supply versus
an external wall-mount transformer thus providing more reliable PoE
performance and a higher total PoE power budget than other similar
switches on the market.
Specifications
RJ45 Ports
10/100/1000Base-TX Connectors RJ-45 (4) PoE and (4) non-PoE (8 total)
Port ConfigurationAuto MDI / MDI-X
Port SpeedAuto-negotiate
PoE
PoE StandardIEEE 802.3af Power over Ethernet / PSE
PoE Power Supply TypeEnd-Span
PoE Power Output Per Port48 VDC, 350 mA . max. 15.4 W
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget55 W
Switch Performance
Switch ArchitectureStore-and-Forward
Switch Fabric (non-blocking)16 Gbps
Throughput (Packet per second)11.9 Mpps to 64 bytes
Address Table8K entry
Maximum Frame Size9K
Flow ControlBack pressure for Half-Duplex, IEEE 802.3x PAUSE Frame
LED Indicators
PowerPower On
Ports 1-8LNK / ACT
Ports 1-4PoE In-use, LNK / ACT
Fan AlertOn if fan is non-operational
Electrical & Mechanical
Supply Voltage100 to 240 VAC, 50/60 Hz, 1.5 A
Power Consumption65 W max./221 BTU max.
EnclosureMetal
Dimensions (W x D x H)217 x 135 x 43 mm
Weight1.96 lbs. / 0.89kg
Environmental
MTBF> 100,000 Hrs to 25°C
Operating Temperature0°C to 50 °C
Storage Temperature-40°C to 70 °C
Relative Humidity 0 to 95% (non-condensing)
Standards Compliance
IEEE StandardsIEEE 802.3 10Base-T
ES3001-4P-4T
Ordering Information
ES3001-4P-4T
E
ES3001-4P-4T
E
4-ports 10 / 100 / 1000Mbps Ethernet (non-PoE)
E
High Performance Switch Architecture
Unmanaged plug-and-play installation requires no
E
programming
Store-and-Forward switching architecture with
E
wire-speed filtering and forwarding rates
E
Prevents packet loss with back pressure (half-duplex)
E
IEEE 802.3x PAUSE frame-flow control (full-duplex)
E
Automatic source-address learning and aging
E
Support to handle Jumbo Packets 9K Bytes
Complies with IEEE 802.3af Power over Ethernet
E
End-Span PSE
E
Supports up to 15.4 W (13.75 W per port at full budget)
E
for Full-Duplex
IEEE 802.3u 100Base-TX
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3-af PoE (15.4w)
EIA/TIA-568 Standards 100-ohm UTP Cat. 5 or better
(100meters, max.)
Regulation FCC Part 15 Class A, CE
Auto detect powered device (PD)
E
55 W total PoE power budget
E
Built-in 65 W power supply
E
0 to 50 ºC operating environment
E
3-year limited warranty
8-Port Unmanaged Ethernet Switch
WEBIPS-KI-ES3001-4P-4T-2014-02-21 07:42:49 www.utcfssecurityproducts.eu
Loading...