Interlogix ES3001-4P-4T User Manual
IFS ES3001-4P-4T User Manual
P/N 1072680 • REV A • ISS 22OCT13
r
r
Copyright © 2013 United Technologies Corporation
Interlogix is part of UTC Climate Controls & Security, a unit of United
Technologies Corporation. All rights reserved.
Trademarks and
patents
The IFS ES3001-4P-4T name and logo are trademarks of United
Technologies.
Other trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
Manufacture
Interlogix
3211 Progress Drive, Lincolnton, NC 28092 USA
Authorized EU manufacturing representative:
UTC Climate Controls & Security B.V.,
Kelvinstraat 7, 6003 DH Weert, Netherlands
Intended use Use this product only for the purpose it was designed for; refer to the
data sheet and user documentation for details. For the latest product
information, contact your local supplier or visit us online at
www.interlogix.com.
Certification
N4131
FCC compliance This equipment has been tested and found to comply with the limits fo
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
You are cautioned that any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
ACMA compliance Notice! This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme á la norme
NMB-003du Canada.
European Union
directives
2004/108/EC (EMC Directive): Hereby, UTC Climate Controls &
Security Corporation, Inc. declares that this device is in compliance
with the essential requirements and other relevant provisions of
Directive 2004/108/EC.
Contact Information For contact information, see www.interlogix.com
www.utcfssecurityproducts.eu
.
or
IFS ES3001-4P-4T User Manual
TABLE OF CONTENTS
IFS ES3001-4P-4T USER MANUAL ................................................................................1
1. INTRODUCTION
1.1 Checklist ...............................................................................................................................................4
1.2 Product Description.............................................................................................................................4
1.3 Features ................................................................................................................................................4
1.4 Specification.............................................................................................................. ...........................5
..........................................................................................................4
2. HARDWARE DESCRIPTION.......................................................................................7
2.1 Front Panel ...........................................................................................................................................7
2.1.1 LED Indicators............................................................................................................................. 7
2.2 Rear Panel.............................................................................................................................................8
3. HARDWARE INSTALLATION .....................................................................................9
3.1 Desktop Installation.............................................................................................................................9
3.2 Rack Mounting .................................................................................................................................. 10
3.3 Product Application.......................................................................................................................... 12
3.3.1 Connecting end node or Switch................................................................................................. 12
3.3.2 Department/ Workgroup PoE Switch......................................................................................... 13
3.4 Power over Ethernet Powered Device ............................................................................................ 14
4. POWER OVER ETHERNET OVERVIEW...................................................................15
5. TROUBLESHOOTING................................................................................................17
APPENDIX A NETWORKING CONNECTION...............................................................18
A.1 DATA OUT PoE Switch RJ-45 Port Pin Assignments (Port 1 to Port-4)..................................... 18
A.2 Switch‘s RJ-45 Pin Assignments (Port-5 to Port-8)...................................................................... 18
A.3 RJ-45 cable pin assignment............................................................................................................ 19
CONTACTING TECHNICAL SUPPORT
........................................................................20
3
IFS ES3001-4P-4T User Manual
1. Introduction
1.1 Checklist
Check the contents of your package for following parts:
ES3001-4P-4T x1
User's manual CD x1
Power cord x 1
If any of these pieces are missing or damaged, please contact your dealer immediately. If possible, retain the carton including
the original packing material, to repack the product in case there is a need to return it to us for repair.
1.2 Product Description
To fulfill the demand of sufficient PoE power for network applications with Gigabit speed transmission, the new member in the
802.3af PoE Gigabit Ethernet Switch family - ES3001-4P-4T, the 8-Port 10/100/1000Mbps with 4-Port 802.3af Power over
Ethernet Switch which features high performance Gigabit IEEE 802.3af PoE (Up to 15.4 Watts) and totally 55 Watts PoE budget
on half of the 10/100/1000Mbps TP ports of ES3001-4P-4T. The four 802.3af PoE ports provide PoE power injector function
which is able to drive 4 IEEE 802.3af compliant powered devices. The ES3001-4P-4T also provides a simple, cost-effective,
and non-blocking wire-speed performance with 10-inch metal shape for de sktop deployment in compact housing, SOHO office
or department network application.
All RJ-45 copper interfaces in the ES3001-4P-4T support 10/100/1000Mbps Auto-Negotiation for optimal speed detection
through RJ-45 Category 6, 5 or 5e cables. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to
any Ethernet device without requiring special straight or crossover cables.
1.3 Features
■ RJ-45 Interface
8-Port 10/100/1000Mbps Gigabit Ethernet ports
4-Port supports 48V DC power to PoE Powered Device
PoE
Complies with IEEE 802.3af Power over Ethernet End-Span PSE
Up to 4 IEEE 802.3af devices powered
Supports PoE Power up to 15.4 Watts for each PoE port
Auto detect powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m
Switching
Hardware based 10/100/1000Mbps Auto-Negotiation and Auto MDI/MDI-X
Flow control for Full Duplex operation and back pressure for Half Duplex operation
Integrates address look-up engine, supporting 8K absolute MAC addresses
9K Jumbo Frame supports at all speed (10/100/1000Mbps)
Automatic address learning and address aging
4
IFS ES3001-4P-4T User Manual
Hardware
10-inch desktop size, rack mountable; 1U height
LED indicators for PoE ready and PoE activity
Optional Rack Ear Accessories Kit for 10-inch cabinet (RKE-10A) and 19-inch cabinet (RKE-10B)
1 silent FAN to provide stable and efficient power performance
Energy-Saving technology
- Link down power saving
- Intelligent scales power based on cable length
1.4 Specification
Model ES3001-4P-4T
Hardware Specification
Network Connector 8-Port RJ-45 for 10/100/1000Base-T
PoE Inject Port 4-Port with 802.3af PoE injector function, Port-1 to Port-4
1 Power, 1 FAN Alert LED
LED Display
1-4 port PoE in-use
1-8 port Speed, LNK/ACT
Switch Architecture Store and Forward switch architecture
MAC Address 8K MAC address table with Auto learning function
Switch Fabric 16Gbps
Switch Throughput 11.9 Mpps
Jumbo Packet Size 9K Bytes
Power Requirement AC 100~240V, 50/60Hz, 1.5A
Power Consumption Max. 65 Watts / 221 BTU
Dimension (W x D x H) 217 x 135 x 43 mm
Weight 890g
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type End-Span
PoE Power Output Per Port 48V DC, 350mA . Max. 15.4 Watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget
55 Watts
Standard Conformance
EMI Safety FCC Class A, CE
Standard Compliance IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3x
IEEE 802.3af
Ethernet
Fast Ethernet
Gigabit Ethernet
Flow Control
Power over Ethernet
5
Environment
Operating Environment 0 ~ 50 Degree C
Storage Environment -40 ~ 70 Degree C
IFS ES3001-4P-4T User Manual
Operating Humidity
Storage Humidity
5 ~ 95%, relative humidity, non-condensing
5 ~ 95%, relative humidity, non-condensing
6
Loading...