Interlogix DT4010, DT4020, DT4025 Specsheet
DT4000 Series
IFS 4 Port Active
Optical Star Coupler
Overview
The IFS DT4000 series active optical star coupler provides
bi-directional distribution of an optical signal to three
optical ports. The system can be expanded up to 28
optical ports by utilizing the built-in expander connection
on the modules. The D1010 and D2100 series transceivers
are fully compatible with this module when used as
RS-232/422 input/output devices. Models within this series
are available for use with multimode or single mode
optical fiber. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments
for either a single unit or when expanding the system.
Each module incorporates power and transmit/receive
status indicating LED’s for each optical port for monitoring proper system operation. The modules are available as
stand-alone versions only.
Application Examples
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• ITS Traffic Signalization Networks
Standard Features
• Bi-directional Distribution of Optical Signals
• System can be Expanded up to 28 Optical Ports
• Star Transmission Architecture
• No In-field Electrical or Optical Adjustments Required
• Power and Optical Port Status LED Indicators
• Automatic Resettable Solid-State Current Limiters
• NTCIP Compatible
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Distances up to 26 Miles (42 km)
• Comprehensive Lifetime Warranty
4 Port Active
Optical Star
Coupler
Provides bi-directional
distribution of an optical signal
to three optical ports.
Specifications
D1010
D1010
D1010
D1010
Remote
Host
Remote
Remote
DT4010
2 Fibers
62.5/125µm MM
up to 3 miles
(4.5 km)
RS-232
or
RS-422
Expander Port to DT 4000
Expander Port to DT 4000
RS-232
or
RS-422
RS-232
or
RS-422
RS-232
or
RS-422
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Data
Data Interface: RS-232, RS-422
Data Rate: DC - 100 Kbps (NRZ)
Bit Error Rate: <1 in 10˚
Wavelength DT4010: 850 nm Multimode
DT4020: 1310 nm, Multimode or Single Mode
DT4030: 1310 nm, Multimode or Single Mode
Number Of Fibers 4 In/4 Out
Connectors
Data and Power: Terminal Block with Screw Clamps
Optical: ST
Electrical & Mechanical
Power:
Surface Mount: +12 VDC @ 250 mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 9.0 x 6.0 x 1.0 in., 23.9 x 15.2 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
Ordering Information
Part Number Opt. Pwr. Budget Max. Distance*
Multimode
62.5/125µm**
Single Mode
9/125µm
Accessories♦
Options
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.
DT4010
DT4020
DT4025
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Description
4 Port Active Optical Star (850 nm)
4 Port Active Optical Star (1310 nm)
4 Port Active Optical Star (1310 nm)
Fibers Required
4 In/4 Out
4 In/4 Out
17 dB
13 dB
14 dB
3.0 miles (4.5 km)
8 miles (13 km)
26 miles (42 km)
Loading...