Interlogix DSGH User Manual

GE

Security

GE-DSG-8 DSGH-5 and 8
Ethernet Switch User Manual

P/N 1069175 • REV 1.0 • ISS 22FEB10

Copyright

Disclaimer

Trademarks and patents

Intended use

FCC compliance

Regulatory information N4131

Manufacturer

© 2010 GE Security, Inc.

This document may not be copied in whole or in part or otherwise reproduced without prior
written consent from GE Security, Inc., except where specifically permitted under US and
international copyright law.

The information in this document is subject to change without notice. GE Security, Inc.

(“GE Security”) assumes no responsibility for inaccuracies or omissions and specifically disclaims
any liabilities, losses, or risks, personal or otherwise, incurred as a consequence, directly or
indirectly, of the use or application of any of the contents of this document. For the latest
documentation, contact your local supplier or visit us online at www.gesecurity.com.

This publication may contain examples of screen captures and reports used in daily operations.
Examples may include fictitious names of individuals and companies. Any similarity to names
and addresses of actual businesses or persons is entirely coincidental.

GE and the GE monogram are trademarks of General Electric Company.

Other trade names used in this document may be trademarks or registered trademarks of the
manufacturers or vendors of the respective products.

Use this product only for the purpose it was designed for; refer to the data sheet and user

documentation for details. For the latest product information, contact your local supplier or visit
us online at

This product is intended to be supplied by a UL Listed Direct Plug-In Power Unit marked "Class 2"
or "LPS" and output rated 48 VDC, 380 mA minimum.

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.

You are cautioned that any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

GE Security, Inc.

HQ and regulatory responsibility:
GE Security, Inc., 8985 Town Center Parkway, Bradenton, FL 34202, USA

EU authorized manufacturing representative:
GE Security B.V., Kelvinstraat 7, 6003 DH Weert, The Netherlands

www.gesecurity.com.

European Union directives

2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as

unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at

Contact information

designated collection points. For more information see: www.recyclethis.info.

For contact information see our Web site: www.gesecurity.com.

For contact information see our Web site: www.gesecurity.eu.

Content

Chapter 1 Introduction 1

Package Contents 1
How to use this Manual 2
Product Features 2

Chapter 2 Installation 5

Product Description 5
Wiring the Fault Alarm Contact 9

Chapter 3 Application 13

Installation Steps 14

Chapter 4 Switch Operation 15

Address Table 15
Learning 15
Forwarding & Filtering 15
Store-and-Forward 16
Auto-negotiation 16

Chapter 5 Troubleshooting 17

Appendix A Network Connection 19

Switch's RJ-45 Pin Assignments 19
RJ-45 Connector pin assignment 20

GE-DSG-8 DSGH-5 and 8 Ethernet Switch User Manual i

ii GE-DSG-8 DSGH-5 and 8 Ethernet Switch User Manual

Chapter 1

Introduction

GE-DSGH-5

The GE Security GE-DSG/DSGH series is a 5 and 8-Port 10/100/1000Mbps Industrial
Gigabit Ethernet Switch with non-blocking wire-speed performance and new slim
type IP 30 metal shape for easy deployment in Heavy Industrial demanding
environments.

GE-DSGH-8

GE-DSG-8

Package Contents

Check the contents of your package for following parts:

• Industrial Gigabit Ethernet Switch x 1

• User's Manual x 1

• DIN Rail Kit x 1

• Wall Mount Kit x 1

If any of these are missing or damaged, please contact your dealer immediately, if
possible, retain the carton including the original packing material, and use them
against to repack the product in case there is a need to return it to us for repair.

GE-DSG-8 DSGH-5 and 8 Ethernet Switch User Manual 1

Chapter 1: Introduction

How to use this Manual

This User Manual is structured as follows:

Section Section Content

INTRODUCTION Product description with features and specifications

INSTALLATION

APPLICATION Explains the Industrial Gigabit Ethernet Switch application

SWITCH OPERATION Explains the Industrial Gigabit Ethernet Switch transmit operation

TROUBLESHOOTING Describes how to troubleshoot the Industrial Gigabit Ethernet Switch

APPENDIX A Contains cable information for the Industrial Gigabit Ethernet Switch

Explains the features/functions of the Industrial Gigabit Ethernet Switch,
and how to physically install the Industrial Gigabit Ethernet Switch

Product Features

Physical Port

• 5-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function (GE-DSGH-5)

• 8-Port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function (GE-DSG-8 / GE­DSGH-8)

Layer 2 Features

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab
1000Base-T Ethernet standard

• Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full
duplex mode

• High performance Store and Forward architecture, broadcast storm control,
runt/CRC filtering eliminates erroneous packets to optimize the network
bandwidth

• Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE
frame flow control (Full-Duplex)

• Integrated address look-up engine, support 8K absolute MAC addresses

• 9K Jumbo packet size support

• Automatic address learning and address aging

2 GE-DSG-8 DSGH-5 and 8 Ethernet Switch User Manual

Chapter 1: Introduction

• CSMA/CD Protocol

Industrial Case / Installation

• IP-30 Metal case / Protection

• DIN Rail and Wall Mount Design

• 12 to 48V DC, redundant power with polarity reverse protect function and

connective removable terminal block for master and slave power

• -10 to 60 Degree C operating temperature on MC-4TX1FXMM-2km / MC­4TX1FXSM-15KM / MC-4TX2FX

GE-DSG-8 DSGH-5 and 8 Ethernet Switch User Manual 3

Chapter 1: Introduction

Product Specifications

Model GE-DSGH-5 GE-DSGH-8 GE-DSG-8

Hardware Specification

10/100/1000Base-T Ports 5 8 8
Installation DIN rail kit and wall mount ear

Dimension (W x D x H) 5.31 x 3.42 x 1.26 inch / 135 x 87 x 32mm
Weight (lbs) 1.0 lbs 1.045 lbs 1.045 lbs
EFT 6KV
ESD 6KV

Electronic Specification

Power Input 12~48 VDC, Redundant power
Power Consumption 11.9 Watts / 40BTU 13.2 Watts / 45BTU 13.2 Watts / 45BTU

Power Connector

Switch Specification

6-pin removable
screw terminal

Switch Processing Scheme Store-and-Forward
Address Table 8K entries
Buffer 176 kilobytes

Flow Control
Switch fabric 10Gbps 16Gbps 16Gbps

Throughput

(Packet per second)

Jumbo Frame 9Kbytes

Network cables

Environment Specification

Operating Temperature -40°C ~75°C -40°C ~75°C -10°C ~60°C
Operating Humidity 5% ~ 95% (non-condensing)
Storage Temperature -40°C ~85°C -40°C ~85°C -40°C ~85°C
Storage Humidity 5% ~ 95% (non-condensing)

Standards Conformance

Standards Compliance

Stability testing

Back pressure for half duplex,
IEEE 802.3x Pause Frame for full duplex

7.44Mpps@64bytes 11.9Mpps@64bytes 11.9Mpps@64bytes

10/100/1000Base-T:
Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.)
EIA/TIA-568 100-ohm STP (100meters, max.)

IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-duplex flow control

IEC60068-2-32 (Free fall),
IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)

4 GE-DSG-8 DSGH-5 and 8 Ethernet Switch User Manual