Interlogix DECR3000-R3, DECR3000, DECR3020-E, DECR3020, DECR3030 Specsheet
...
®
DECT3020, DECR3020: 1310 nm, Multimode
DECT3030, DECR3030: 1310 nm, Single Mode
System Design
IFS
Line / Fiber Transmission
DECT/DECR
3000 Series
IFS 8-Channel Contact Mapping
Ethernet Transmitters and Receivers
OVERVIEW
The IFS DECT/DECR3000 Series contact mapping transmitter
and receiver provides transmission of up to eight independent
contact closures over Ethernet electrical 10/100TX or 100FX optical
fiber. The DECT/DECR3000 utilizes microprocessor-based logic
for exceptionally robust communications channel redundancy.
Models within this series are available for use with electrical RJ45,
multimode or single mode optical fiber. Plug-and-play design
ensures ease of installation requiring no electrical or optical
adjustments. Each module incorporates power and individual status
indicating LED’s for monitoring confirmation of contact closure of
each of the eight channels. The modules are available in standalone only.
APPLICATION EXAMPLES
• Alarm Event Triggering
• Building Automation and Environmental Control Systems
• Fire & Alarm Systems
• Lane/Gate Control
• PIR Signal Transmission
STANDARD FEATURES
• Transmits Up to Eight Contact Closures Over Fiber or CAT 5
• Web Based Configuration
• Eight Channel Point-to-Point Transmission Architecture
• Power and Eight Individual Channel Status LED Indicators
• Eight SPST Reed Relays (with individual indicators)
• Designed to Meet the Requirements of NEMA TS-1/TS-2 &
Caltrans Specifications (Temperature/Humidity, Shock/Vibration,
and Voltage Transient Protection) for Traffic Control Equipment.
• Loss of Carrier Relay for Alarm Notifications
• Relay Contact Rating: 200VDC, 0.5Amps, Normally Open
• No In-field Electrical or Optical Adjustments Required
• Automatic Resettable Solid-State Current Limiters
• Distances up to 28 Miles (45km)
• Comprehensive Lifetime Warranty
SYSTEM DESIGN
8
Contacts in
up to 1.2 miles
DECT3020 DECR3020
International
Fiber
Systems
ifs
Incorporated
203.426.1180
(2 km)
1 Fiber
62.5/125μm MM
100 FX
ifs
203.426.1180
International
Fiber
Systems
Incorporated
8
Contacts out
interlogix.com
Specifications
Data
Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM
D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM
Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2
D1030: 2 D1030WDMA: 1 D1030WDMB: 1
Connectors
Optical: ST
Data and Power: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
DE
CT/DECR3000 Series
IFS 8-Channel Contact Mapping Ethernet Transmitters and Receivers
Ordering Information
Electrical DECT3000 10/100 Mbps electrical TX and RX N/A 300 ft. (100 m)
Multimode 62.5/125µm** DECT3020 Contact Mapping TX and RX (1310 nm) 2 10 dB 1.2 miles (2 km)
Single Mode 9/125µm DECT3030 Contact Mapping TX and RX (1310 nm) 2 15 dB 28 miles (45 km)
Accessories ♦
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Specifications
Data
Input/Output Channels: 8
Contacts: 200 VDC, 0.5 amp, 12 watts - Normally open/closed
Response Time: 25 msec maximum, typical
Wavelength
DECT3000, DECR3000: 850 nm, Multimode
DECT3020, DECR3020: 1310 nm, Multimode
DECT3030, DECR3030: 1310 nm, Single Mode
Number Of Fibers
Connectors
Power: Terminal Block with Screw Clamps
Optical: SC
Data: RJ-45
Electrical & Mechanical
Power:
Surface Mount: 12VDC @ 350mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)
North America
T 855-286-8889
Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*
DECR3000 10/100 Mbps electrical TX and RX N/A 300 ft. (100 m)
DECR3020 Contact Mapping TX and RX (1310 nm) 2 10 dB 1.2 miles (2 km)
DECR3030 Contact Mapping TX and RX (1310 nm) 2 15 dB 28 miles (45 km)
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
2
Latin America
T 561-998-6114
Interlogix is part of UTC Building & Industrial Systems,
Code of Federal Regulations, Subchapter J
Specifications subject to change without notice.
© 2013 United Technologies Corporation
a unit of United Technologies Corporation.
Agency Compliance
Complies with FDA Performance
Standard for Laser Products, Title 21,
interlogix.com
All rights reserved.
DECT/DECR 3000 Series
Loading...