Interlogix DE7300-MM, DE7300-MS Specsheet
GE
DE7300 Series
Security
The IFS DE7300 Series Gigabit Ethernet 3-port transceiver
is designed to transmit and receive 1000 Mbps data over
fiber or 10/100/1000 Mbps data over CAT5e electrical cable.
It is available in any combination of electrical or optical
ports. The DE7300 is environmentally hardened to operate
in extreme temperatures. Loss of optical link contact closure
for remote alarm sensing. Status indicating LEDs for power
and data activity are present at the RJ-45 connector. At
the fiber optic transceiver end, link and data LEDs provide
operational status. Plug-and-play design ensures ease of
installation, requiring no optical adjustments. The modules
are available in stand-alone only.
Application Examples
• 10/100/1000 Mbps Ethernet
• High Speed Computer Links
IFS 10/100/1000 Mbps Gigabit
Ethernet 3 Port Switch
Standard FeaturesOverview
• 10/100/1000 Mbps Ethernet
- 10/100/1000 BASE-T Electrical Port
- 1000 BASE-FX Optical Port
- Full Duplex or Half Duplex
- Auto MDI/MDI-X
• Distances up to 30 km (18 miles)
• Designed to Meet Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Multimode and Single Mode Versions Available
• SC Optical Connectors Standard
• No In-field Optical Adjustments Required
• Power, Transmit and Receive Data Status LED Indicators
• Loss of Optical Link Contact Closure
• IEEE 802.3 Compliant
• Comprehensive Lifetime Warranty
10/100/1000 Mbps
Gigabit Ethernet
3 Port Switch
Transmits and receives 1000 Mbps
data over multimode, single mode,
optical fiber, or 10/100/1000 Mbps
data over CAT5e electrical cable.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Specifications
Data
Data Interface: Ethernet
Data Rate: 10/100/1000 Mbps, IEEE 802.3 Compliant
Operating Mode: Full Duplex or Half Duplex
Wavelength DE7300-MM, ME, M3: 850 nm, Multimode
Number of fibers 2, 4, 6
Connectors
Power: Terminal Block with Screw Clamps
Optical: SC
Data: RJ-45
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 600 mA, 24 VDC @ 300 mA
Voltage Regulation: Solid-State; independent on each board
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.0 x 3.5 x 1.0 in., 10.2 x 8.9 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
DE7300-MS: 850 nm, Multimode/1310 nm, Single Mode
DE7300-SS, SE, S3: 1310 nm, Single Mode
Agency compliance
System Design
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
DE7300-SS
Code of Federal Regulations, Subchapter J
ifs
203.426.1180
Ordering Information
Electrical
Multimode
62.5/125μm**
MM/SM
Single Mode
9/125μm
Part Number Opt. Pwr. Budget Max. Distance*
DE7300-EE
DE7300-MM
DE7300-ME
DE7300-M3
DE7300-MS
DE7300-SS
DE7300-SE
Description
10/100/1000 Mbps Ethernet
1000 Mbps Ethernet (850 nm)
1000 Mbps Ethernet (850/1310 nm)
1000 Mbps Ethernet (1310 nm)
DE7300-S3
♦
Accessories
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget .
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Fibers Required
N/A
4
2
6
4
4
2
6
♦
All accessories are third party manufactured.
International
Fiber
Systems
Incorporated
N/A
8dB
8dB
10 dB
2 Fibers
9/125μm SM
up to 18 miles
(30 km)
DE7400-S
International
Fiber
Systems
ifs
Incorporated
203.426.1180
DE7400-S
International
Fiber
Systems
ifs
Incorporated
203.426.1180
10/100 Mbps 328 ft . (100 m)
1000 Mbps 33 ft . (10 m)
0.3 miles (500 m)
0.3 miles (500 m) MM
15 miles (24 km) SM
18 miles (30 km)
Loading...