Interlogix DE7210MWDMA, DE7230M Specsheet

GE

DE7200M Series

Security

Overview

The IFS DE7200M Series Ethernet 2 port media converter is
designed to transmit and receive 10/100 Mbps data over
multimode or single mode optical fiber. The IFS DE7200M
Series will function as a 10 Mbps Ethernet link, or as a 100
Mbps Ethernet link without any adjustments. The DE7200M
Series is environmentally hardened to operate in extreme
temperatures. Status indicating LED’s for power and data
rate are present at the RJ-45 connector. At the fiber optic
transceiver end, link and data LEDs provide operational
status. Plug-and-play design ensures ease of installation
requiring no optical adjustments. The modules are
available in stand-alone only.

Application Examples

• 10/100 Mbps Ethernet

• High Speed Computer Links

IFS 10/100 Mbps Ethernet

Mini 2 Port Media Converter

Standard Features

• 10/100 Mbps Ethernet

- 100 FX Optical Port

- 10/100 Selectable

- Full Duplex or Half Duplex Data

• Supports Auto MDI/MDI-X

• Distances up to 45 km (28 miles)

• NTCIP Compatible

• Designed to Meet Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

• Multimode and Single Mode Versions Available

• SC Optical Connectors Standard

• No In-field Electrical or Optical Adjustments Required

• Power, Transmit and Receive Data Status LED Indicators

• IEEE 802.3 Compliant

• Comprehensive Lifetime Warranty

10/100 Mbps
Ethernet Mini
2 Port Media
Converter

Designed to transmit and receive
10/100 Mbps data over
multimode or single mode fiber.

2 Fibers

9/125µm SM

up to 23 miles

(37 km)

DE7230M

DE7230M

Specifications

Data

Data Interface: Ethernet
Data Rate: 10/100 Mbps, IEEE 802.3 Compliant
Operating Mode: Full-Duplex or Half-Duplex

Wavelength DE7210M: 1310 nm, MM DE7210MWDM: 1310/1550 nm, MM

DE7230M: 1310 nm, Single Mode

Number of fibers 1 or 2

Connectors

Power: Terminal Block with Screw Clamps
Optical: SC
Data: RJ-45

Electrical & Mechanical

Power: 24 VAC @ 110 mA
12 VDC @ 200 mA
Voltage Regulation: Solid-State; independent on each board
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 1.0 x 2.0 x 3.5 in., 2.5 x 5.1 x 8.9 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

Part Number Opt. Pwr. Budget Max. Distance*

Multimode

62.5/125µm**

Single Mode
9/125µm

Accessories

Options

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.

DE7210M
DE7210M-WDMA
DE7210M-WDMB

DE7230M

♦

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

Description

10/100 Mbps Ethernet (1310 nm)
10/100 Mbps Ethernet (1310/1550 nm)
10/100 Mbps Ethernet (1550/1310 nm)

10/100 Mbps Ethernet (1310 nm)

Fibers Required

2
1
1

1

10 dB

8 dB
8 dB

15 dB

1.2 miles (2 km)

23 miles (37 km)