Page 1
GE
DE7200 Series
Security
The IFS DE7200 Series Ethernet 2 port transceiver is
designed to transmit and receive 10/100 Mbps data over
multimode or single mode optical fiber. The IFS DE7200
Series will function as a 10 Mbps Ethernet link, or as a 100
Mbps Ethernet link without any adjustments. The DE7200
Series is environmentally hardened to operate in extreme
temperatures. Loss of optical link contact closure for
remote alarm sensing. Status indicating LED’s for power
and data rate are present at the RJ-45 connector. At the
fiber optic transceiver end, link and data LEDs provide
operational status. Plug-and-play design ensures ease of
installation requiring no optical adjustments. The modules
are available in stand-alone only.
Application Examples
• 10/100 Mbps Ethernet
• High Speed Computer Links
IFS 10/100 Mbps Ethernet
2 Port Transceiver
Standard Features Overview
• 10/100 Mbps Ethernet
- 100 FX Optical Port
- Full Duplex or Half Duplex
• Distances up to 45 km (28 miles)
• Designed to Meet Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Multimode and Single Mode Versions Available
• SC Optical Connectors Standard
• No In-field Optical Adjustments Required
• Power, Transmit and Receive Data Status LED Indicators
• Loss of Optical Link Contact Closure
• IEEE 802.3 Compliant
• Comprehensive Lifetime Warranty
10/100 Mbps
Ethernet 2 Port
Transceiver
Transmits and receives 10/100 Mbps
data over multimode, single mode,
optical fiber, or electrical.
Page 2
Specifications
2 Fibers
9/125µm SM
up to 28 miles
(45 km)
DE7200-S
DE7200-S
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Data
Data Interface: Ethernet
Data Rate: 10/100 Mbps, IEEE 802.3 Compliant
Operating Mode: Full Duplex or Half Duplex
Wavelength DE7200-MM, M, MS: 1310 nm, Multimode
DE7200-SS, S, MS: 1310 nm, Single Mode
Number of fibers 2, 4
Connectors
Power: Terminal Block with Screw Clamps
Optical: SC
Data: RJ-45
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 200 mA
Voltage Regulation: Solid-State; independent on each board
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.0 x 3.0 x 1.0 in., 10.2 x 7.6 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
Ordering Information
Part Number Opt. Pwr. Budget Max. Distance*
Multimode
62.5/125µm**
MM/SM
Single Mode
9/125µm
Accessories
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.
DE7200-M
DE7200-MM
DE7200-MS
DE7200-S
DE7200-SS
♦
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Description
10/100 Mbps Ethernet (1310 nm)
10/100 Mbps Ethernet (1310 nm)
10/100 Mbps Ethernet (1310 nm)
Fibers Required
2
4
4
2
4
10 dB
10 dB/15 dB
15 dB
1.2 miles (2 km)
1.2 miles (2 km) MM
28 miles (45 km) SM
28 miles (45 km)
Loading...