Interlogix DE7100-EE, DE7100-ME-50, DE7100-ME, DE7100-MM, DE7100-MS Specsheet
...
GE
DE7100 Series
Security
The IFS DE7100 Series Ethernet 3 port transceiver is
designed to transmit and receive 10/100 Mbps data over
multimode, single mode optical fiber, or electrical.
The DE7100 provides one port 10/100TX and two ports of
either 10/100TX or 100FX depending on the model ordered.
The IFS DE7100 Series will function as a 10 Mbps Ethernet
link, or as a 100 Mbps Ethernet link without any adjustments.
The DE7100 Series is environmentally hardened to operate
in extreme temperatures. Loss of optical link contact
closure for remote alarm sensing. Status indicating LED’s
for power and data rate are present at the RJ-45 connector.
At the fiber optic transceiver end, link and data LEDs provide
operational status. Plug-and-play design ensures ease of
installation requiring no optical adjustments. The modules
are available in stand-alone only.
Application Examples
• 10/100 Mbps Ethernet
• High Speed Computer Links
IFS 10/100 Mbps Ethernet
3 Port Transceiver
Standard FeaturesOverview
• 10/100 Mbps Ethernet
- 10/100 TX Electrical Port
- 100 FX Optical Port
- Full Duplex or Half Duplex
• Distances up to 45 km (28 miles)
• Designed to Meet Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Multimode and Single Mode Versions Available
• SC Optical Connectors Standard
• No In-field Optical Adjustments Required
• Power, Transmit and Receive Data Status LED Indicators
• Loss of Optical Link Contact Closure
• IEEE 802.3 Compliant
• Comprehensive Lifetime Warranty
10/100 Mbps
Ethernet 3 Port
Transceiver
Transmits and receives 10/100 Mbps
data over multimode, single mode,
optical fiber, or electrical.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Specifications
Data
Data Interface: Ethernet
Data Rate: 10/100 Mbps, IEEE 802.3 Compliant
Operating Mode: Full Duplex or Half Duplex
Wavelength DE7100-MM, EM, MS: 1310 nm, Multimode
DE7100-SS, ES, MS: 1310 nm, Single Mode
Number of fibers 2, 4
Connectors
Power: Terminal Block with Screw Clamps
Optical: SC
Data: RJ-45
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 200 mA
Voltage Regulation: Solid-State; independent on each board
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.0 x 3.0 x 1.0 in., 10.2 x 7.6 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
Agency compliance
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
DE7100-MS
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Ordering Information
Part Number Opt. Pwr. Budget Max. Distance*
Electrical
Multimode
62.5/125μm**
MM/SM
Single Mode
9/125μm
Accessories
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget .
DE7100-EE
DE7100-MM
DE7100-ME
DE7100-MS
DE7100-SS
DE7100-SE
♦
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Description
10/100 Mbps Ethernet
10/100 Mbps Ethernet (1310 nm)
10/100 Mbps Ethernet (1310 nm)
10/100 Mbps Ethernet (1310 nm)
Fibers Required
N/A
4
2
4
4
2
♦
All accessories are third party manufactured.
up to 1.2 miles
(2 km)
2 Fibers
62.5/125μm MM
2 Fibers
9/125μm SM
up to 28 miles
(45 km)
DE7200-S
ifs
203.426.1180
N/A
10 dB
10 dB/15 dB
15 dB
DE7200-M
International
Fiber
Systems
ifs
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
328 ft. (100 m)
1.2 miles (2 km)
1.2 miles (2 km) MM
28 miles (45 km) SM
28 miles (45 km)
Loading...