Interlogix D9130WDM Specsheet
International Fiber Systems, Incorporated ■ DESIGN CENTER (888)999-9IFS or (203)426-1180
FAX (203)426-3326
■ sales@ifs.com
Europe, Middle East, Africa TEL +44(0)1732-522777
■ Asia Pacific TEL (852)291-41491 ■ Latin America TEL (512)477-8787
• Meets EIA RS-232C/D Specifications (Simplex or Duplex)
• User-Configurable Optical & Electrical Anti-Streaming Provides Network
Protection Against Faulty Streaming Controller Operation
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Robust Design Assures Extremely High Reliability In
Unconditioned Roadside Environments
• User-Selectable Local, Master or Bus operation and DTE or
DCE Interface Ensured Ease of Installation and Maximum Versatility
• Supports Request to Send (RTS) and Clear to Send (CTS) Signals
• RJ-45 expansion port provides network branching capability by
electrically linking colocated transceiver units
•
Solid-State Current Limiters on all Power Lines Provide Equipment Protection
• Optional Internal Battery Back-up Provides a Minimum of 12 Hours
Operating Time in the Event of Loss of 115 VAC Prime Operating Power,
and Maintains Continuous Channel Communications
• Supports Single and Dual-Master/ Bus Traffic Signal Controller
Communication System Architectures
• Wide Optical Dynamic Range:
Optical Attenuators are Never Required
• NTCIP Compatible
• Comprehensive Lifetime Warranty
PRODUCT SPECIFICATION
SINGLE FIBER RS-232 DROP AND REPEAT DATA TRANSCEIVER
D9100WDM SERIES
FEATURES
• ITS Traffic Signalization Networks
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• Fire & Alarm Systems
APPLICATION EXAMPLES
DESCRIPTION
ORDERING INFORMATION
PAR T
NUMBER
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
SINGLEMODE
9/125µm
MULTIMODE
62.5/125µm**
1
1
2.2 miles (3.5 km)
42 miles (69 km
)
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
Add ‘-SC’ to Model Number for SC Optical Connector (For Single mode Equipment Only)
Add ‘-FC’ to Model Number for FC Optical Connector (For Single mode equipment only)
Add ‘-C’ for Conformally Coated Printed Circuit Boards
Add ‘-B’ Suffix for NIMH Battery Back-Up Option
D9110WDM
D9130WDM
FIBERS
REQUIRED
14 dB
23 dB
DESCRIPTION
Repeater (850/1310 nm, LED)
Repeater (1310/1550 nm, Laser)
The IFS series D9100WDM consists of fully-digital single fiber transceiver units designed for implementing simplex or full-duplex RS-232 dropand-repeat poll-and-respond traffic signalization/communications data networks utilizing one optical fiber. These environmentally hardened units are
ideal for use in unconditioned out-of-plant or roadside installations and the
master-configured transceiver unit may be located anywhere within the
network, making this equipment ideal for applications involving on-street
master controllers with upstream and downstream communications
requirements. The D9100WDM series may be used in a conventional single-master/multiple local network architecture, or in a dual-master/bus
multiple local configuration for higher levels of communications reliability. Manually resettable anti-streaming is included for unparalleled network
protection. Optional battery back-up capability provides the highest level
of network reliability in the event of a loss of local 115 VAC prime operating power, and maintains continuous communications channel operation.
Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly
ascertaining equipment operating status, and these units are available in
either stand-alone or rack mount configurations.
D
.comwww.
Available at:
Available at:
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦
All accessories are third party manufactured.
ACCESSORIES
♦
OPTIONS
10/06/04
DATA
Data Interface: RS-232 C/D
Data Rate: DC to 100 kbps
Bit Error Rate: <1 in 10
-9
@ Maximum Optical Loss Budget
Anti-Streaming Time-out: 4, 8, 16, 32, 64 Seconds, or Infinity
(disabled)
Operating Mode: Asynchronous, Simplex or Full-Duplex
WAVELENGTH 850/1310 nm, Multimode
1310/1550 nm, Singlemode
NUMBER OF FIBERS 1
CONNECTORS
Power: Terminal Plug with Screw Clamps
•
Data: Type DB-25S
Optical: Type ST, SC or FC
(see ordering information)
OPTICAL EMITTER 1310/1550nm, Singlemode: Laser Diode
850/1310 nm, Multimode: LED
LED INDICATORS 1. Transmit Data, Optical Channel 1 (TD 1)
2. Receive Data, Optical Channel 1 (RD-1)
3. Transmit Data, Optical Channel 2 (TD-2)
4. Receive Data, Optical Channel 2 (RD-2)
5. Power On (PWR)
6. Fault /Antistreaming Activated
7. Request to Send (RTS)
8. Clear to Send (CTS)
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 12 VDC @ 250 mA
Rack: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State Current
Limiters
Circuit Board: Meets IPC Standard
Size (in./ cm.) (LxWxH): 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5 cm.
7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5 cm.
Shipping Weight: < 2 lbs./0.9 kg
ENVIRONMENTAL
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C, ambient
Storage Temp: -40° C to +85° C, ambient
Relative Humidity: 0% to 95% (non-condensing)†
BATTERY BACK-UP
OPTION
▲
Internal, Rechargeable Nickel Metal Hydride
(NIMH) Battery
Operating Period: 12 hours, minimum
• Optional Type DB-9P: Specify connector style at time of order.
†May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
▲
Add suffix ‘-B’ to model number for Battery Backup
Singlemode
9/125µm
S-232
g
e
.
er
C
r
cal
C
r
cal
C
r
International
Fiber
Systems
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
203.426.1180
SYSTEM DESIGN
SPECIFICATIONS
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ sales@ifs.com
16 Commerce Road
■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
TECHNICAL SPECIFICATION
SINGLE FIBER RS-232 DROP AND REPEAT DATA TRANSCEIVER
D9100WDM SERIES
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
TRANSMITTER
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
MODEL
OUTPUT PWR
SENSITIVITY
Multimode
62.5/125µm**
850/1310 nm
D9110WDM
D9130WDM
25 µw
(-16 dBm)
200 µw
(-7 dBm)
1 µw
(-30 dBm)
14 dB
23 dB
2.2 miles (3.5 km)
42 miles (69 km)
1310/1550 nm
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
AGENCY COMPLIANCE
MADE IN THE USA
Federal Supply Schedule
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
Mast
ontrolle
Typical traffic signalization network utilizin
single-master traffic signal controller and multipl
local controllers.
RS-232 master, drop and repeat to RS-232 locals
2 single mode fibers, 42 miles (69 km)
D9100EWDM
R
International
Fiber
Systems
ifs
Incorporated
203.426.1180
up to 2.2 miles
(3.5 km)
1 Fiber
62.5/125µm MM
D9100
ifs
203.426.1180
Lo
ontrolle
International
Fiber
Systems
Incorporated
RS-232
D9100EWDM
International
Fiber
Systems
ifs
Incorporated
203.426.1180
RS-232
Lo
ontrolle
Loading...