Interlogix D9130-B-R3, D9130-R3, D9130 Specsheet
®
850 nm or 1310 nm, Multimode: LED
1310 nm, Single Mode: laser Diode
▲
2.5 miles (4 km)
8 miles (13 km)
43 miles (69 km)
2 In/2 Out
2 In/2 Out
Fibers Required
14 dB
23 dB
System Design
IFS
Line / Fiber Transmission
D9100 Series
IFS RS-232/422 Drop and Repeat
Data Transceivers
OVERVIEW
The IFS D9100 Series consists of fully-digital transceiv
designed for implementing simplex or full-duplex RS-232 dropand-repeat poll-and-respond traffic signalization/communications
data networks utilizing two optical fibers. These environmentallyhardened units are ideal for use in unconditioned out-of-plant
or roadside installations and the master-configured transceiver
unit may be located anywhere within the network, making this
equipment ideal for applications involving on-street master
controllers with upstream and downstream communications
req
uirements. The D9100 Series may be used in a conventional
single-master/multiple local network architecture, or in a dualmaster/bus multiple local configuration for higher levels of
communications reliability. Manually resettable anti-streaming is
included for unparalleled network protection. Optional battery
back-up capability provides the highest level of network reliability
in the event of a loss of local prime operating power, and maintains
continuous communications channel operation. Plug-and-play
design ensures ease of installation and no electrical or optical
adjustments are ever required. LED indicators are provided for
rapidly ascertaining equipment operating status, and these units are
available in either stand-alone or rack-mount configurations.
APPLICATION EXAMPLES
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• Fire & Alarm Systems
• ITS Traffic Signalization Networks
SYSTEM DESIGN
Master
Controller
Ty pical traffic signalization network utilizing
single-master traffic signal controller and multiple
local controllers.
RS-232 master, drop and repeat to RS-232 locals.
2 single mode fibers, 42 miles (69 km)
RS-232
Duplex 9/125 fiber
D9100E
International
Fiber
Systems
ifs
Incorporated
203.426.1180
62.5/125µm MM
er units
up to 2.2 miles
(3.5 km)
2 Fibers
D9100
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Local
Controller
STANDARD FEATURES
• Meets EIA RS-232 C/D Specifications (Simplex or Duplex)
• NTCIP Compatible
T
ested and Certified by an Independent Testing Laboratory for
•
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
Robust Design Assures Extr
•
Roadside Environments
• User-Selectable Local, Master or Bus operation and DTE or DCE
Interface Ensured Ease of Installation and Maximum Versatility
• Supports Request to Send (RTS) and Clear to Send (CTS) Signals
RJ-45 expansion port provide
•
electrically linking colocated transceiver units
•Solid-State Current Limiters on all Power Lines Provide Equipment
Protection
• Optional Internal Battery Back-up Provides additional
Operating Time in the Event of Loss of Prime Operating
Power, and Maintains Continuous Channel Communications.
S
upports Single and Dual-Master/Bus Traffic Signal Controller
•
Communication System Architectures
• Wide Optical Dynamic Range: Optical Attenuators are Never
Required
User-Configurable Optical & E
•
Network Protection Against Faulty Streaming Controller Operation.
• Comprehensive Lifetime Warranty
D9100E
International
Fiber
Systems
ifs
Incorporated
203.426.1180
RS-232
Local
Controller
RS-232
emely High Reliability In Unconditioned
s network branching capability by
lectrical Anti-Streaming Provides
interlogix.com
Specifications
Data
Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM
D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM
Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2
D1030: 2 D1030WDMA: 1 D1030WDMB: 1
Connectors
Optical: ST
Data and Power: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
D9100 Series
IFS RS-232/422 Drop and Repeat Data Transceivers
Ordering Information
Multimode 62.5/125µm** D9100 Repeater (850 nm, LED) 2 In/2 Out 14 dB 2.5 miles (4 km)
Single Mode 9/125µm D9130 Repeater (1310 nm, Laser) 2 In/ 2 Out 23 dB 43 miles (69 km)
Accessories ♦
Options Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦
All accessories are third party manufactured.
Specifications
Data
Data Interface: RS-232 C/D, RS-422
Data Rate: DC - 100 Kbps
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10° @ Maximum Optical Loss Budget
Anti-Streaming Time-out: 4, 8, 16, 32, 64 Seconds, or Infinity (disabled)
Wavelength
Number Of Fibers
Connectors
Power: Terminal Block with Screw Clamps
Optical: ST
Data: Type DB-25S
Electrical & Mechanical
Power:
Surface Mount: 12VDC @ 250mA
Rack: From Rack
Number of Rack Slots: 1 (2 slots required for units with ‘-B’ battery back-up option)
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm.
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C*
Storage Temp: -40° C to +85° C*
Relative Humidity: 0% to 95% (non-condensing)
Battery Back-up Option
Add Suffix ‘-B’ to model number for battery back up
North America
T 855-286-8889
Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Add ‘-B’ Suffix for NIMH Battery Back-Up Option
850 nm or 1310 nm, Multimode: LED
1310 nm, Single Mode: laser diode
2 In/2 Out
Latin America
T 561-998-6114
Internal, Rechargeable Nickel Metal Hydride battery
Interlogix is par t of UTC Building & Industrial Systems,
Code of Federal Regulations, Subchapter J
Specifications subject to change without notice.
© 2013 United Technologies Corporation
a unit of United Technologies Corporation.
Agency Compliance
Complies with FDA Performance
Standard for Laser Products, Title 21,
interlogix.com
All rights reser ved.
D910 0 S er ies
Loading...