Interlogix D9110 Specsheet

D9100 Series

Security

Overview

The IFS series D9100 consists of fully-digital transceiver units designed for implementing simplex or full-duplex RS-232 drop-and-repeat poll-and-respond traffic signalization/ communications data networks utilizing two optical fibers. These environmentally-hardened units are ideal for use in unconditioned out-of-plant or roadside installations and the master-configured transceiver unit may be located anywhere within the network, making this equipment ideal for applications involving on-street master controllers with upstream and downstream communications requirements. The D9100 series may be used in a conventional single master/multiple local network architecture, or in a dualmaster/bus multiple local configuration for higher levels of communications reliability. Manually resettable antistreaming is included for unparalleled network protection. Optional battery back-up capability provides the highest level of network reliability in the event of a loss of local 115 VAC prime operating power, and maintains continuous communications channel operation. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and these units are available in either stand-alone or rack-mount configurations.

IFS RS-232/422 Drop and Repeat

Data Transceivers

Standard Features

• Meets EIA RS-232 C/D Specifications (Simplex or Duplex)

• NTCIP Compatible

• Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

• Robust Design Assures Extremely High Reliability In Unconditioned Roadside Environments

• User-Selectable Local, Master or Bus operation and DTE or DCE Interface Ensured Ease of Installation and Maximum Versatility

• Supports Request to Send (RTS) and Clear to Send (CTS) Signals

• RJ-45 expansion port provides network branching capability by electrically linking colocated transceiver units

Application Examples

• Access Control Systems

• Building Automation and Environmental Control Systems

• Computer/Data Equipment

• Fire & Alarm Systems

• ITS Traffic Signalization Networks

RS-232/422 Drop and Repeat Data Transceivers

Designed to implement simplex or full-duplex RS-232 data signals over two optical fibers.

• Solid-State Current Limiters on all Power Lines Provide Equipment Protection

• Optional Internal Battery Back-up Provides a Minimum of 12 Hours Operating Time in the Event of Loss of 115 VAC Prime Operating Power, and Maintains Continuous Channel Communications.

• Supports Single and Dual-Master/Bus Traffic Signal Controller Communication System Architectures

• Wide Optical Dynamic Range: Optical Attenuators are Never Required

• User-Configurable Optical & Electrical Anti-Streaming Provides Network Protection Against Faulty Streaming Controller Operation

• Comprehensive Lifetime Warranty

D9100E

Duplex 9/125 fiber

RS-232

Typical traffic signalization network utilizing single-master traffic signal controller and multiple local controllers.

RS-232 master, drop and repeat to RS-232 locals. 2 single mode fibers, 42 miles (69 km)

Master

Controller

RS-232

D9100

Local

Controller

RS-232

D9100E

Local

Controller

ifs

International

Fiber

Systems

Incorporated

203.426.1180

ifs

International

Fiber

Systems

Incorporated

203.426.1180

ifs

International

Fiber

Systems

Incorporated

203.426.1180

2 Fibers

62.5/125µm MM

up to 2.2 miles

(3.5 km)

Security

North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566 E sales@ifs.com

Asia T 852-2907-8108 F 852-2142-5063

Australia and New Zealand T 613-9239-1200 F 613-9239-1299

Europe T 44-113-238-1668 F 44-113-253-8121

Latin America T 305-593-4301 F 305-593-4300

gesecurity.com/ifs

Specifications subject to change without notice

Agency compliance

Made in the USA

Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J

Specifications

Data

Data Interface: RS-232 C/D, RS-422 Data Rate: DC - 100 Kbps Operating Mode: Asynchronous Simplex or Full-Duplex Bit Error Rate: <1 in 10˚ @ Maximum Optical Loss Budget Anti-Streaming Time-out: 4, 8, 16, 32, 64 Seconds, or Infinity (disabled)

Wavelength 850 nm or 1310 nm, Multimode: LED

1310 nm, Single Mode: laser Diode

Number Of Fibers 2 In/2 Out

Connectors

Power: Terminal Block with Screw Clamps Optical: ST, SC or FC Data: Type DB-25S

Electrical & Mechanical

Power: Surface Mount: 12 VDC @ 250 mA Rack: From Rack Number of Rack Slots: 1 (2 slots required for units with ‘-B’ battery back-up option) Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm Rack Mount: 7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours Operating Temp: -40° C to +74° C Storage Temp: -40° C to +85° C Relative Humidity: 0% to 95% (non-condensing)†

Battery Back-up Option

Internal, Rechargeable Nickel Metal Hydride Battery, Operating Period: 12 Hours Minimum

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

▲Add suffix ‘-B’ to model number for battery back-up

▲

Ordering Information

Multimode

62.5/125µm**

Single Mode

Part Number Opt. Pwr. Budget Max. Distance*

D9110 D9120

D9130

Description

Repeater (850 nm, LED) Repeater (1310 nm, LED)

Repeater (1310 nm, Laser)

9/125µm

Accessories♦

PS-12VDC 12 Volt DC Plug-in Power Supply (Included) PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)

Options

Add ‘-SC’ to Model Number for SC Optical Connector (for single mode equipment only) Add ‘-FC’ to Model Number for FC Optical Connector (for single mode equipment only) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory) Add ‘-B’ Suffix for NIMH Battery Back-Up Option

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.

Fibers Required

2 In/2 Out

System Design

14 dB

23 dB

2.5 miles (4 km) 8 miles (13 km)

43 miles (69 km)