Interlogix D8020WDMA Specsheet

GE

D8000 Series

Security

The IFS D8000 Series is a fully-digital data multiplexer that
supports up to 8 channels of full duplex data on one optical
fiber, and is ideal for those applications where the available
fiber count may be limited or additional data channels
must be added to an existing optical cable plant. These
environmentally hardened data multiplexers are designed
for use in unconditioned out-of-plant or roadside
installations. Any of the eight available data channels
may be independently configured for either RS-232, RS-422
or RS-485 (2 or 4-wire) operation, providing a high level
of versatility. Plug-and-play design ensures ease of
installation and no electrical or optical adjustments
are ever required. LED status indicators are provided for
rapidly ascertaining equipment operating status, and
these units are available in either stand-alone or rack
mount configurations.

Application Examples

• Access Control Systems

• Building Automation and Environmental Control Systems

• Computer/Data Equipment

• Fire & Alarm Systems

• ITS Traffic Signalization Networks

IFS 8-Channel Full Duplex
Data Multiplexer

Standard FeaturesOverview

• Supports up to 8 Channels of Full-Duplex RS-232, RS-422
and RS-485 (2 or 4-wire) Data on One or Two Fibers

• Environmentally hardened design assures extremely high
reliability in unconditioned roadside or out-of-plant
environments

• Integrated WDM for Greater Product Reliability

• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental

Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

• Operating Power, Transmit and Receive Data, TDM Lock
and Optical Carrier Detect Status LED Indicators

• Automatic Resettable Solid-State Current Limiters

• No In-field Electrical or Optical Adjustments Required

• Data rates up to 115 kbps

• Transparent to Data Encoding

8-Channel Full
Duplex Data
Multiplexer

Supports up to 8-channels of full
duplex data on one optical fiber.

• Hot-Swappable Rack Modules

• Distances up to 37 Miles (60 km)

• Comprehensive Lifetime Warranty

GE

D8030WDMA

Remote

Host

1 Fiber

9/125µm SM

D8030WDMB

up to 37 miles

(60 km)

ifs

InternationalInternational

F

iberFiber

S

ystemsSystems

I

ncorporatedIncorporated

203.426.1180203.426.1180

ifs

InternationalInternational

F

iberFiber

S

ystemsSystems

I

ncorporatedIncorporated

203.426.1180203.426.1180

Security

North America
T 203 4261180
F 203 426 3326
E [e-mail]

Asia
T [phone]
F [phone]

Australia and New Zealand
T [phone]
F [phone]

Europe
T [phone]
F [phone]

Latin America
T 512 477 8787
F 512 477 8555

Design Center:
T 888 999 9437
F 203 426 3326

www.ifs.com

Specifications subject to
change without notice

© 2008 General Electric Company
All Rights Reserved

AGENCY COMPLIANCE

Specifications

DATA

Data Interface: RS-232, RS-422, RS-422 (2 or 4-wire)

Channel are independently configurable with any of these protocols.
Data Rate: DC - 115 kbps
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Number of Channels: 8

WAVELENGTH D8020WDMA: 1310/1550 nm, MM: LED

D8020WDMB: 1550/1310 nm, MM: LED

D8030WDMA: 1310/1550 nm, SM: Laser Diode

D8030WDMB: 1550/1310 nm, SM: Laser Diode

NUMBER OF FIBERS 1

CONNECTORS

Optical: ST
Data: RJ-45
Power: Terminal Block with Screw Clamps

ELECTRICAL & MECHANICAL

Power:
Surface Mount: 12 VDC @ 400 mA
Rack: From Rack
Number of Rack Slots: 3
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 3.0 in., 17.8 x 12.5 x 7.5 cm
Rack Mount: 7.0 x 5.0 x 3.0 in., 17.8 x 12.7 x 7.5 cm
Shipping Weight: < 2 lbs./0.9 kg

ENVIRONMENTAL

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)

MADE IN THE USA

Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J

Ordering Information

Optical Pwr. Budget

10 dB

20 dB

Max. Distance*

6 miles (0 km)

37 miles (60 km)

Multimode

62.5/125µm**

Single Mode
9/125µm

♦

Accessories

♦

Part Number

D8020WDMA
D8020WDMB

D8030WDMA
D8030WDMB

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)

❖

❖

Description

8 Full Duplex Data Channels (1310/1550 nm)
8 Full Duplex Data Channels (1550/1310 nm)

8 Full Duplex Data Channels (1310/1550 nm)
8 Full Duplex Data Channels (1550/1310 nm)

Fibers Required

1

1

Options

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth.
** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

♦♦

All accessories are third party manufactured.

System Design