Interlogix D7420-R3, D7420, D7420WDM-R3, D7420WDM, D7430WDM-R3 Specsheet

• 10/100 Mbps Ethernet

- Auto-Negotiating

- 10/100 Selectable

• Auto Network Detection MDI/MDI-X

• Relay Output for Network Communication
Failure Notification

• Power, Transmit and Receive Data Status LED Indicators

• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

• Multimode and Singlemode Versions Available

• IEEE 802.3 Compliant • NTCIP Compatible

• No In-field Electrical or Optical Adjustments Required

• ST Optical Connectors Standard

• Hot-Swappable Rack Modules

• Distances up to 60km (37 miles)

• Comprehensive Lifetime Warranty

International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or [phone]

FAX [phone]

■ [e-mail]

Europe, Middle East, Africa TEL [phone]

■ Asia Pacific TEL [phone] ■ Latin America TEL [phone]

HARDENED 4 PORT 10/100 Mbps ETHERNET DROP AND REPEAT

D7400 SERIES

FEATURES

DESCRIPTION

The IFS D7400 Series Ethernet transceivers provide drop-and-repeat
transmission of 10/100 Mbps Ethernet data signals over one or two
optical fibers. The transceivers feature 4 electrical and 2 optical ports
for drop-and-repeat capability that allows the user to easily configure
the network operation. The 4 electrical ports are capable of
connecting at 10/100 Mbps Ethernet data 802.3 protocol using
auto-negotiating and auto-MDI/MDIX features. The IFS D7400
transceivers are compatible with the IFS D7100 Series single port
transceivers. Models within this series are available for use with
multimode or single mode optical fiber and are compatible with
standard 100-FX networks. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments. Each
transceiver incorporates power and link status indicating LED’s for
monitoring proper system operation. In addition, 2 continuously
active contact closure relays are available to activate an external
audible or visual warning signal in the event of a fiber break or
loss of power. The modules are available in either stand-alone
or rack mount.

ORDERING INFORMATION

PART
NUMBER

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

SINGLEMODE

9/125µm

MULTIMODE

62.5/125µm**

2 In/2 Out

1 In/1Out

1 In/1Out

PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

D7420

D7420WDM

D7430WDM

FIBERS

REQUIRED

10 dB

10 dB

20 dB

6.2 miles (10 km)

6.2 miles (10 km)

37 miles (60 km)

DESCRIPTION

4 Port Ethernet Drop & Repeat (1310 nm)

4 Port Ethernet Drop & Repeat (1310/1550 nm)

4 Port Ethernet Drop & Repeat (1310/1550 nm)

PRODUCT SPECIFICATION

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

♦

All accessories are third party manufactured.

.comwww.

Available at:

Available at:

• A & E Specifications, (CSI)

• AutoCAD Drawings

• Operation Manuals

• Technical Bulletins

D

• Outdoor Traffic Management Control
– Intra-City and Inter-City Traffic Management

• Industrial and Factory Automation

• High-Speed Computer Links
– High-Speed Data Transmission

• CCTV

APPLICATION EXAMPLES

ACCESSORIES

♦

OPTIONS

6.2 miles (10 km)

37 miles (60 km)

TRANSCEIVER

SYSTEM DESIGN

DAT A

Data Interface: Ethernet
Data Rate: 10/100 Mbps

IEEE 802.3 Compliant

Number of Inputs: 4

WAVELENGTH

D7420 1310 nm
D7420WDM 1310/1550 nm (1550/1310 nm)
D7430WDM 1310/1550 nm (1550/1310 nm)

NUMBER OF FIBERS 1 or 2

CONNECTORS

Optical: ST
Power: Terminal Plug with screw clamps
Data: RJ-45

ELECTRICAL & MECHANICAL

Power: 12 VDC @800 mA
Number of Rack Slots: 3
Voltage Regulation: Solid-state; independent on each board

Current Protection: Automatic Resettable Solid-State Current

Limiters

Circuit Board: Meets IPC Standard
Size (in./ cm.) (LxWxH):
Surface Mount: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm.
Rack Mount: 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.6 cm

Shipping Weight: < 2 lbs./0.9 kg

ENVIRONMENTAL

MTBF: >100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

† May be extended to condensation conditions by adding suffix ‘–C’to
model number for conformal coating.

• Tested and Certified by an Independent Testing Laboratory for

Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

SPECIFICATIONS

TEL [phone] ■ FAX [phone] ■ www.ifs.com ■ [e-mail]

16 Commerce Road

■ Newtown, CT 06470

Due to our continued effort to advance technology, product specifications are subject to change without notice.

D7400 SERIES

HARDENED 4 PORT 10/100 Mbps ETHERNET DROP AND REPEAT

OPTICAL POWER BUDGET

FIBER

WAVELENGTH

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

MODEL

Multimode

62.5/125µm**

D7420

D7420WDM (1310/1550 nm)

D7430WDM (1310/1550 nm)

10 dB

20 dB

Singlemode

9/125µm

1310 nm

1310/1550 nm

TECHNICAL SPECIFICATION

International
Fiber
Systems
Incorporated

203.426.1180

International
Fiber
Systems
Incorporated

203.426.1180

International
Fiber
Systems
Incorporated

203.426.1180

International
Fiber
Systems
Incorporated

203.426.1180

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.

Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

12/21/04

AGENCY COMPLIANCE

MADE IN THE USA

Federal Supply Schedule

Contract No. GS-07F-0049M

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J

Host

10/100 Mbps

D7130

ifs

203.426.1180

International
Fiber
Systems
Incorporated

1 Fiber

9/125µm SM

up to 37 miles

(60 km)

International
Fiber
Systems

ifs

Incorporated

203.426.1180

10/100 Mbps

Remote Remote

International
Fiber
Systems

ifs

Incorporated

203.426.1180

10/100 Mbps

D7130D7430D7430

Remote

International
Fiber
Systems

ifs

Incorporated

203.426.1180

10/100 Mbps