Interlogix D7420WDMA-RSH-R3, D7420WDMB-RSH-R3, D7430WDMA-RSH, D7430WDMB-RSH Specsheet

®

6 miles (10 km)

37 miles (60 km)

TRANSCEIVER

IEEE 802.3 Compliant

Limiters

Circuit Board: Meets IPC Standard
Size (in./ cm.) (LxWxH):
Surface Mount: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm.
Rack Mount: 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.6 cm

Shipping Weight: < 2 lbs./0.9 kg

ENVIRONMENTAL

MTBF: >100,000 hours

Operating Temp: -40° C to +74° C

Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non-condensing)†

† May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.

• Tested and Certified by an Independent Testing Laboratory for Full

Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.

D7400RSH SERIES

HARDENED 3 PORT 10/100 Mbps ETHERNET
REDUNDANT SELF HEALING

WAVELENGTH

OPTICAL

PWR BUDGET

MAX.

DISTANCE*

MODEL

D7420WDMA-RSH (1310/1550 nm)
D7420WDMB-RSH (1550/1310 nm)

D7430WDMA-RSH (1310/1550 nm)
D7430WDMB-RSH (1550/1310 nm)

10 dB

20 dB

1310/1550 nm
1550/1310 nm

TECHNICAL SPECIFICATION

ifs

ifs

ifsifs

ETHERNET

NETWORK

REDUNDANT

INTERCONNECT

REDUNDANT

INTERCONNECT

PRIMARY

PRIMARY

FIBER

PRIMARY

FIBER

SECONDARY

FIBER

SECONDARY

FIBER

PRIMARY

SECONDARY

TRUNK

TRUNK

SECONDARY

ETHERNET

NETWORK

Host

Host

AGENCY COMPLIANCE

MADE IN THE USA

Federal Supply Schedule

Contract No. GS-07F-0049M

Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J

IFS

Line / Fiber Transmission

D7400RSH Series

IFS Hardened 3 Port 10/100 Mbps
Ethernet Redundant Self-healing

OVERVIEW

The IFS D7400RHS Series Ethernet transceivers provide
transmission of (3) 10/100 Mbps Ethernet data signals in a
redundant, self-healing ring network architecture utilizing one
optical fiber. The transceivers feature 3 electrical and 2 optical ports
and can be configured in a redundant self-healing capacity that
allows the user to easily configure a network that is highly reliable.
The 3 electrical ports are capable of connecting at 10/100 Mbps
Ethernet data 802.3 protocol using auto-negotiating and auto-MDI/
MDI-X features. Models wit
multimode or single mode optical fiber and are compatible with
standard 100-FX networks. Plug-and-play design ensures ease
of installation requiring no electrical or optical adjustments. Each
transceiver incorporates power and link status indicating LED’s for
monitoring proper system operation. In addition, 2 continuously
active contact closure relays are available to activate an external
audible or visual warning signal in the event of a fiber break or loss
of power. The modules are available in either stand-alone or rack
mount.

APPLICATION EXAMPLES

• Outdoor Traffic Management Control

• Industrial and Factory Automation

• High-Speed Computer Links
– High-Speed Data Transmission

• CCTV

hin this series are available for use with

– Intra-City and Inter-City Traffic Management

STANDARD FEATURES

• 10/100 Mbps Ethernet

-Auto-Negotiating

-10/100 Selectable

• No In-field Electrical or Optical Adjustments Required

• Auto Network Detection MDI/MDI-X

• Relay Output for Network Communication Failure Notification

• Power, Transmit and Receive Data Status LED Indicators

• Multimode and Single mode Versions Available

• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions
and Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.

• Distances up to 60km (37 miles)

• ST Optical Connectors Standard

• Hot-Swappable Rack Modules

• IEEE 802.3 Compliant

• Comprehensive Lifetime Warranty

SYSTEM DESIGN

interlogix.com

Specifications

Data

Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚

Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM

D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM

Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2

D1030: 2 D1030WDMA: 1 D1030WDMB: 1

Connectors

Optical: ST
Data and Power: Terminal Block with Screw Clamps

Electrical & Mechanical

Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.

GE

Security

North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [e-mail]

Asia
T 852-2907-8108
F 852-2142-5063

Australia and New Zealand
T 613-9239-1200
F 613-9239-1299

Europe
T 44-113-238-1668
F 44-113-253-8121

Latin America
T 305-593-4301
F 305-593-4300

gesecurity.com/ifs

Specifications subject to
change without notice

© 2008 General Electric Company
All Rights Reserved

D7400RSH Series

IFS Hardened 3 Port 10/100 Mbps Ethernet Redundant Self-healing

Ordering Information

Multimode 62.5/125µm**

Single Mode 9/125µm

Accessories ♦

Options Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

All accessories are third party manufactured.  WDMA must mate with a WDMB

♦

Specifications

Data

Data Interface: Ethernet

Data Rate: 10/100 Mbps

Number of Inputs: 3

Wavelength

D7420WDMA-RSH 1310/1550 nm

D7420WDMB-RSH 1550/1310 nm

D7430WDMA-RSH 1310/1550 nm

D7430WDMB-RSH 1550/1310 nm

Number Of Fibers

Connectors

Optical: ST

Power: Terminal Block with Screw Clamps

Data: RJ-45

Electrical & Mechanical

Power: 12 VDC @ 800 mA

Number of Rack Slots: 3

Voltage Regulation: Solid-state; independent on each board

Current Protection: Automatic Resettable Solid-State Current Limiters

Circuit Board: Meets IPC Standard

Size (in./cm.) (LxWxH)

Surface Mount: 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm

Rack Mount: 7.7 x 5.0 x 3.0 in., 19.6 x 12.7 x 7.6 cm

Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours

Operating Temp: -40° C to +74° C

Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non-condensing)

North America

T 855-286-8889

Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*

3 Port Ethernet (1310/1550 nm) 1 In/1 Out 10 dB 6 miles (10 km)

D7420WDMA-RSH

D7420WDMB-RSH 3 Port Ethernet (1550/1310 nm) 1 In/1 Out 10 dB 6 miles (10 km)

D7430WDMA-RSH

D7430WDMB-RSH 3 Port Ethernet (1550/1310 mn) 1 In/1 Out 20 dB 37 miles (60 km)

PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)

IEEE 802.3 Compliant

1



3 Port Ethernet (1310/1550 nm) 1 In/1 Out 20 dB 37 miles (60 km)



Latin America

T 561-998-6114

Interlogix is part of UTC Building & Industrial Systems,

Code of Federal Regulations, Subchapter J

Specifications subject to change without notice.

© 2013 United Technologies Corporation

a unit of United Technologies Corporation.

Agency Compliance

Complies with FDA Performance

Standard for Laser Products, Title 21,

interlogix.com

All rights reserved.

D7400RSH Series