Interlogix D2300-R3, D2300, D2300WDM-R3, D2300WDM, D2320 Specsheet
...
GE
D2300 Series
Security
Overview
The IFS D2300 series data transceivers provide drop and
repeat transmission of half-duplex (2-wire) EIA RS-485 data
signals over one or two optical fibers. The transceivers
feature optical “drop & repeat” capability that allows the
user to easily configure the network operation. The
transceivers are transparent to data encoding allowing for
broad-range compatibility. The D2300 series transceivers
can be used as line-terminating devices with these
modules. Models within this series are available for use
with multimode or single mode optical fiber. Plug-and-play
design ensures ease of installation requiring no electrical or
optical adjustments. Each transceiver incorporates power
and transmit/receive data status indicating LED’s for
monitoring proper system operation. The modules are
available in either stand-alone or rack mount versions.
Application Examples
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• Fire & Alarm Systems
• ITS Traffic Signalization Networks
IFS RS-485 (2-wire)
Drop and Repeat Data Transceivers
Standard Features
• Meets EIA RS-485 Specifications
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Automatic Resettable Solid-State Current Limiters
• Power, Transmit and Receive Data Status LED Indicators
• No In-field Electrical or Optical Adjustments Required
• Data rates up to 200 kbps NRZ
• Data Re-clocking
• Transparent to Data Encoding / Compatible with
Major Data Protocols
• Drop and Repeat Network Architecture
• 2-Wire (Half-Duplex)
• True Tri-State Output
• Distances up to 20 Miles (33 km)
RS-485 (2-wire)
Drop and Repeat
Data Transceivers
Transmission of half-duplex (2-wire)
EIA RS-485 data signals over
one or two optical fibers.
• Comprehensive Lifetime Warranty
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Specifications
Data
Data Interface: RS-485 (2-wire)
Data Rate: DC - 200 Kbps
Total Network Pulse Distortion: <1μs
Wavelength D2300: 850 nm, Multimode
Number Of Fibers 2 In/2 Out
Connectors
Data and Power: Terminal Block with Screw Clamps
Optical: ST
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 250 mA to 24 VDC @ 125 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
All others: 1310 nm, Multimode or Single Mode
Agency compliance
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
System Design
Control
Data
D1300 D2300
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Code of Federal Regulations, Subchapter J
Host
Ordering Information
Part Number
Multimode
62.5/125μm**
Single Mode
9/125μm
Accessories♦
Options
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦ All accessories are third party manufactured.
D2300
D2320
D2325
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Description
RS-485, 2-Wire Repeater (850 nm)
RS-485 2-Wire Repeater (1310 nm)
RS-485 2-Wire Repeater (1310 nm)
Fibers Required
2 In/2 Out
2 In/2 Out
Opt. Pwr. Budget
10 dB
23 dB
up to 1.9 miles
(3 km)
International
Fiber
Systems
ifs
Incorporated
203.426.1180
2 Fibers
Control
62.5/125μm MM
Data
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Control
Data
D1300D2300
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Control
Data
Max. Distance*
1.9 miles (3 km)
6 miles (10 km)
20 miles (33 km)
Loading...