Interlogix D2315-1300, D2315-SM-R3, D2315-SM, D2315 Specsheet
GE
D2315 Series
Security
Overview
The IFS D2315 series data transceivers provide drop and
repeat transmission of full-duplex (4-wire) EIA RS-485 data
signals over two optical fibers. The transceivers feature
optical “drop & repeat” capability that allows the user to
easily configure the network operation. The transceivers
are transparent to data encoding allowing for broad-range
compatibility. The D2315 series transceivers can be used as
line-terminating devices with these modules. Models within
this series are available for use with multimode or single
mode optical fiber. Plug-and-play design ensures ease of
installation requiring no electrical or optical
adjustments. Each transceiver incorporates power and
transmit/receive data status indicating LED’s for monitoring
proper system operation. The modules are available in
either stand-alone or rack mount versions.
Application Examples
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• Fire & Alarm Systems
• ITS Traffic Signalization Networks
IFS RS-485 (4-wire)
Drop and Repeat Data Transceivers
Standard Features
• Meets EIA RS-485 Specifications
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Automatic Resettable Solid-State Current Limiters
• Power, Transmit and Receive Data Status LED Indicators
• No In-field Electrical or Optical Adjustments Required
• Data rates up to 200 kbps NRZ (400 kbps for -HS option)
• Data Re-clocking
• Transparent to Data Encoding / Compatible with
Major Data Protocols
• Drop and Repeat Network Architecture
• 4-Wire (Full-Duplex)
• True Tri-State Output
• Distances up to 20 Miles (33 km)
RS-485 (4-wire)
Drop and Repeat
Data Transceivers
Transmission of full-duplex (4-wire)
EIA RS-485 data signals over
two optical fibers.
• Comprehensive Lifetime Warranty
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Specifications
Data
Data Interface: RS-485 (4-wire)
Data Rate: DC - 200 Kbps
Total Network Pulse Distortion:
*
-HS Option Data Rate:
<1μs
DC - 400 Kbps
Wavelength D2315: 850 nm, Multimode
All others: 1310 nm, Multimode or Single Mode
Number Of Fibers 2 In/2 Out
Connectors
Data and Power: Terminal Block with Screw Clamps
Optical: ST
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 250 mA to 24 VDC @ 125 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
*
Agency compliance
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
System Design
Control
Data
Host
D1315 D2315
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Ordering Information
Multimode
62.5/125μm**
Single Mode
9/125μm
Accessories♦
Part Number Opt. Pwr. Budget Max. Distance*
D2315
D2315
D2315-SM
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
Description
RS-485, 4-Wire Repeater (850 nm)
RS-485 4-Wire Repeater (1310 nm)
RS-485 4-Wire Repeater (1310 nm)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Options
Add ‘-24’ for 24 VDC Power (Extra charge, consult factory)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-HS’ for High Speed Data (DC - 400 kbps).
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦ All accessories are third party manufactured.
Fibers Required
2 In/2 Out
2 In/2 Out
10 dB
11 dB
up to 1.9 miles
(3 km)
International
Fiber
Systems
ifs
Incorporated
203.426.1180
2 Fibers
Control
62.5/125μm MM
Data
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Control
Data
D1315D2315
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Control
Data
1.9 miles (3 km)
6 miles (10 km)
20 miles (33 km)
Loading...