Interlogix D2100-R3, D2100, D2100WDM-R3, D2100WDM Specsheet
GE
D2100 Series
Security
Overview
The IFS D2100 series data transceivers provide drop and
repeat transmission of simplex or duplex EIA RS232/RS-422
data signals over one or two optical fibers. The transceivers feature optical “drop & repeat” capability that allows
the user to easily configure the network operation. The
transceivers are transparent to data protocol. The transceivers are also compatible with the IFS D1010 series data
transceivers. Models within this series are available for use
with multimode or single mode optical fiber. Plug and Play
design ensures ease of installation requiring no electrical or
optical adjustments. Each transceiver incorporates power
and transmit/receive data status indicating LED’s for monitoring proper system operation. The modules are available
in either stand-alone or rack mount versions.
Application Examples
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• Fire & Alarm Systems
• Traffic Signal Control Equipment
IFS RS-232/422 Drop and Repeat
Data Transceivers
Standard Features
• Meets EIA RS-232/422 Specifications (Simplex or Duplex)
• Drop and Repeat Network Architecture
• Transparent to Data Encoding / Compatible with
Major Data Protocols
• Data Rates up to 100 Kbps
• No In-field Electrical or Optical Adjustments Required
• Power, Transmit and Receive Data Status LED Indicators
• NTCIP Compatible
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
• Integrated WDM for Greater Product Reliability
• Automatic Resettable Solid-State Current Limiters
• Hot-Swappable Rack Modules
RS-232/422
Drop and Repeat
Data Transceivers
Transmission of simplex or duplex
EIA RS-232/RS-422 data signals
over one or two optical fibers.
• Distances up to 26 Miles (42 km)
• Comprehensive Lifetime Warranty
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Agency compliance
Specifications
Data
Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 100 Kbps
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚
Wavelength D2100: 850 nm, MM D2120: 1310 nm, MM
D2125: 1310 nm, SM D2100WDM: 850/1310 nm, MM
NumberOfFibers D2100WDM: 1 In/1 Out
All Others: 2 In/2 Out
Connectors
Optical: ST
Data and Power: Terminal Block with Screw Clamps
Electrical&M echanical
Power:
Surface Mount: 12 VDC @ 250 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
NOTE: The D2100 Series is compatible with some RS-485 (4-wire) systems, consult factory.
System Design
up to 2.5 miles
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
RS-232
Host
RS-232 host drop and repeat to RS-422 remotes
International
Fiber
Systems
ifs
Incorporated
203.426.1180
62.5/125μm MM
2 Fibers
D2100
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Remote
RS-422
(4 km)
D2100
ifs
203.426.1180
Remote
International
Fiber
Systems
Incorporated
RS-422
Ordering Information
Multimode
62.5/125μm∗∗
Single Mode
9/125μm
Accessories♦
Options
PartNumber Opt.P wr.Budget Max.Distance*
D2100
D2100WDM
D2120
D2125
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-24’ for 24 VDC Power (Extra charge, consult factory)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Description
Repeater (850 nm)
Repeater (850/1310 nm)
Repeater (1310 nm)
Repeater (1310 nm)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
∗Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. For 50/125 Fiber, subtract 4 dB from Optical Power Budget .∗∗ ♦All accessories are third party manufactured. WDMA must mate with a WDMB
FibersRequired
2 In/2 Out
1 In/1 Out
2 In/2 Out
2 In/2 Out
14 dB
14 dB
13 dB
14 dB
2.5 miles (4 km)
2.5 miles (4 km)
8 miles (13 km)
26 miles (42 km)
D1010D1010
ifs
203.426.1180
Remote
International
Fiber
Systems
Incorporated
RS-422
Loading...