Interlogix D19120SHR, D19130SHR-R3, D19130SHR Specsheet
GE
D19100SHR Series
Security
Overview
The IFS D19100SHR series Self-Healing Ring Transceiver
unit is a fully-digital transceiver designed for implementing
traffic signalization/communications data networks of the
highest possible reliability. Unlike competing products, the
multiple-master capability of this series provides full
protection against the possibility of a single point of failure,
significantly enhancing the reliability and availability of the
network. Primary and alternate-master transceiver units
may be either co-located or diversity located, and the data
input/output interconnection to the primary and alternatemaster units is achieved by the use of a simple “Y”
electrical cable. Full data re-clocking and regeneration
permit an almost unlimited number of transceiver/
controller units to be used within the network. These
environmentally hardened transceivers are ideal for use in
unconditioned out-of-plant or roadside installations.
Plug-and-play design ensures ease of installation and no
electrical or optical adjustments are ever required. LED
indicators are provided for rapidly ascertaining equipment
operating status, and these units are available in either
stand-alone or rack mount configurations.
Application Examples
• High Reliability Traffic Signalization Networks
IFS Self-Healing Ring/
Full Duplex Data Transceivers
Standard Features
• Unique Multiple-Master Capability Eliminates the
Possibility of a Single Point of Failure within the Network;
No Need for Costly Node Processors or External Switching
Equipment and Custom Software
• Simple “Y” Electrical Cable Provides Data Interconnect
Between Primary and Alternate-Master Transceiver Units
• Robust Design Assures Extremely High Reliability In
Unconditioned Out-of-Plant/Roadside Environments
• LED Status Indicators Provide Rapid Indication of
All Critical Operating Parameters
• Full Data Re-clocking and Regeneration: No Limit as to the
Number of Transceiver Units Used Within the Network
• User-Configurable Optical & Electrical Anti-Streaming
Provides Network Protection Against Faulty Streaming
Controller Operation
• NTCIP Compatible
• Tested and Certified by an Independent Testing
Laboratory for Full Compliance with the Environmental
Requirements (Ambient Operating Temperature,
Mechanical Shock, Vibration, Humidity with Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Specification for Traffic Signal Control Equipment.
Self-Healing Ring/
Full Duplex
Data Transceivers
Designed for implementing traffic
signalization/communications
data networks.
• User-Selectable Local or Master operation and DTE or
DCE Interface Ensures Ease of Installation and Maximum
Versatility
• Solid-State Current Limiters on All Power Lines Provide
Equipment Protection
• Wide Optical Dynamic Range: Optical Attenuators are
Never Required
• Comprehensive Lifetime Warranty
X
Master
Controller/
Computer
Local
Controller
Local
Controller
Local
Controller
In the event of a cable break,
all nodes on the network
maintain communication
with the Master Controller/Computer.
D19130SHR
D19130SHR
D19130SHR
D19130SHRD19130SHR
up to 31 miles
(51 km)
PRIMARY
MASTER
ALTERNATE
MASTER
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
ifs
International
Fiber
Systems
Incorporated
203.426.1180
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T
852-2907-8108
F 852-2142-5063
Australia and New Zealand
T
613-9239-1200
F 613-9239-1299
Europe
T
44-113-238-1668
F 44-113-253-8121
Latin America
T
305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Agency compliance
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Specifications
Data
Data Interface:
user-selectable
Data Rate: DC - 100 Kbps
Operating Mode: Asynchronous, Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚ @ Maximum Optical Loss Budget
Anti-Streaming Time-out: 4, 8, 16, 32, 64 Seconds, or Infinity (disabled)
Wavelength 850 nm or 1310 nm, Multimode
1310 nm, Single Mode
Number Of Fibers 2 In/2 Out
Optical Emitt
1310 nm, Single Mode: Laser Diode
Connectors
Power: Terminal
Optical: ST or FC (see ordering information)
Data: Type DB-25S
Electrical & Mechanical
Power:
Mount: 12 VDC @ 300 mA
Surface
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
•Optional Type DB-9P; specify connector style at time of order.
RS-232 C/D, RS-422 or RS-485 (2 or 4-wire) with tri-state protocols,
er 850 nm or 1310 nm, Multimode: LED
Block with Screw Clamps
•
Ordering Information
Multimode
62.5/125µm**
Single Mode
9/125µm
Accessories♦
Part Number Opt. Pwr. Budget Max. Distance*
D19110SHR
D19120SHR
D19130SHR
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Description
Data Transceiver (850 nm)
Data Transceiver (1310 nm)
Data Transceiver (1310 nm) 31 miles (51 km)
Add ‘-24’ for 24 VDC Power (Extra charge, consult factory)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-FC’ to Model Number for FC Optical Connector (for single mode equipment only)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.
Fibers Required
2 In/2 Out
2 In/2 Out
System Design
10 dB
17 dB
1.9 miles (3 km)
6 miles (10 km)
Loading...