Interlogix B742AVT-RSTL, B7742AVR-RFC, B7742AVR-RST Specsheet

GE
Fiber Optic
Security
Overview
Selectable Audio Levels
For added flexibility, dual range audio levels for the audio channel can be configured for -10 dB to +8 dB or 0 dB to +18 dB operation.
Built-in Diagnostics
Two multi-segment LED displays provide complete monitoring of input video, output video, audio input and audio output levels and the received optical signal. When switched to the test mode on the receiver, the front panel LEDs have the capability to display the received optical level. This built-in test feature aids in the installation process as it easily measures the actual optical loss in the fiber run from the transmitter.
Video and Audio
Standard Features
• One-way video and audio transmission over one single mode or multimode fiber
• Exceeds EIA-250C Short Haul Standard
• 10-bit video processing
• 24-bit audio processing
• 20 Hz to 20 kHz frequency response
• Balanced or unbalanced audio
• 13 dB optical budget
• Video SNR >67 dB
• 90 dB audio SNR
• Built-in 1.0 kHz test generator
• Built-in optical power meter
Video and 2-Channel Audio
B742AV and B7742AV
GE
GE
Security
Security
U.S. T (561) 998-6100 T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada T 519 376 2430 F 519 376 7258
Asia T 852-2907-8108 F 852-2142-5063
Australia T 61-3-9239-1200 F 61-3-9239-1299
Europe T
32-2-719-9847
F
32-2-719-9846
Latin America T 305-593-4301 F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company All Rights Reserved
Related Diagram
Video In
2 Audio In
Transmitter
Optical Fiber
Receiver
Video Out
2 Audio Out
Specifications
Video B742AV (Multimode) B7742AV (Single Mode)
Channels 1 simplex Format NTSC and PAL Input/Output Signal 1.0 V pk-pk Bandwidth 7.5 MHz Signal-to-Noise Ratio >67 dB Input/Output Impedance 75 ohms Differential Phase <0.7° Differential Gain
Audio
Channels Input Signal Level Input Impedance Frequency Response Sampling Rate Output Signal Level Output Impedance Signal-to-Noise Ratio Total Harmonic Distortion Test Signal
Optical
Mode Multimode Single Mode Optical Budget 13 dB 18 dB
Emitter Laser Wavelength 1300 nm 1310 or 1550 nm Operating Distance 3.7 mi (6 km) Up to 37 mi (60 km)
Modulation Type Digital Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power 13.5 VDC regulated Current Requirement 600 mA Power Consumption 6 W Power Factor 5 Protection Solid-state short circuit protection
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C) Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions 1 slot (1.0”) Weight 0.6 lbs (0.27 kg) Construction Aluminum
∗∗
-10 dBm to +8 dBm or 0 dBm to +18 dBm
600 ohms or 30 k ohms (balanced or unbalanced)
8 dBu or 18 dBu maximum
<30 ohms unbalanced, <60 ohms balanced
<2%
2 simplex
20 Hz to 20 kHz
48 kHz
90 dB
<0.03%
1 kHz @5 dBu
(depending on model)
Ordering Information
Use the Configurator below to select the options available for this product.
B742AV
Product Type
TRTransmitter
Receiver
Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB. ∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative. B742AV-2006-09-2
-RSTL
imagination at work
imagination at work
B7742AV
Product Type
TRTransmitter
Receiver
Receiver
-R
Connector Type
FC Type ST Type
ST
High Order Wavelength
Add here only if ordering
LFC
High Order Wavelength
Loading...