Interlogix B746AVR-EST2, B746AVT-RST1, B7746AVR-EST1, B7746AVT-EST1, B7746AVT-RST1 Specsheet

GE
Fiber Optic
Security
Overview
Digital Video and Audio Processing
Digital processing of the video component along with a signal­to-noise ratio >55 dB that assures clean, noise-free video at the receiver. Digital processing of the audio signal along with an audio signal-to-noise ratio >70 dB allows the audio output to drive balanced or unbalanced loads and maintain constant audio levels.
Built-in Diagnostics
Built-in system performance analysis includes LED displays that provide for complete monitoring of transmitter and receiver operation.
Video and Audio
Standard Features
• One-way video and two-way audio transmission over one or two single mode or multimode fibers
• 8-bit video processing
• 24-bit audio processing
• 20 Hz to 15 kHz frequency response
• Balanced or unbalanced audio
• 13 dB optical budget
• Video SNR >55 dB
• Audio SNR >70 dB
• 32 kHz audio sampling rate
• THD <0.01%
Video and Two-Way Audio
B746AV and B7746AV
GE
GE
Security
Security
U.S. T (561) 998-6100 T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada T 519 376 2430 F 519 376 7258
Asia T 852-2907-8108 F 852-2142-5063
Australia T 61-3-9239-1200 F 61-3-9239-1299
Europe T
32-2-719-9847
F
32-2-719-9846
Latin America T 305-593-4301 F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company All Rights Reserved
Related Diagram
Video In
Audio In/Out
Transmitter
Optical Fiber
Receiver
Video Out
Audio In/Out
Specifications
Video B746AV (Multimode) B7746AV (Single Mode)
Channels 1 simplex Format NTSC and PAL Input/Output Signal 1.0 V pk-pk Bandwidth
Video Resolution Signal-to-Noise Ratio >55 dB Input/Output Impedance 75 ohms Differential Phase <0.8° Differential Gain
Audio
Channels Input Signal Level Input Impedance Frequency Response Sampling Rate Output Signal Level Output Impedance Signal-to-Noise Ratio Total Harmonic Distortion
Optical
Mode Multimode Single Mode Optical Budget 13 dB 18 dB
Emitter Laser Wavelength 850 and/or 1300 nm 1310 and/or 1550 nm
Operating Distance 3.2 mi (5.2 km) Up to 37 mi (60 km)
Modulation Type Digital Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power 13.5 VDC regulated Current Requirement 450 mA Power Consumption 6 W Power Factor 4 (rack units only) Protection Solid-state short circuit protection
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C) Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD) Standalone: 5.0" x 4.8" x 1.5" (127 x 122 x 38 mm); Rack: 1 slot (1.0") Weight Standalone 0.75 lbs (0.34 kg); Rack 0.6 lbs. (0.27 kg) Construction Steel (standalone); Aluminum (rack)
∗∗
6 dBu balanced (max.), 0 dBu unbalanced
30 k ohms (balanced or unbalanced)
6 dBu balanced (max.), 0 dBu unbalanced
<30 ohms unbalanced, <60 ohms balanced
6.5 MHz
520 TV Lines
3%
1 duplex
20 Hz to 15 kHz
33 kHz
>70 dB
<0.003%
(depending on model)
(depending on model)
Ordering Information
Use the Configurator below to select the options available for this product.
Rack Card
-
No. of Fibers
1
Fiber
2
Fibers
Optical Wavelength
L
Add here only if ordering High Order Wavelength
(2 Fiber units only)
B746AV
Product Type
TRTransmitter
Receiver
Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
B746AV-2006-09-2
- ST
Optical Wavelength
L
Enclosure
E
Standalone
R
Rack Card
No. of Fibers
12Fiber
Fibers
imagination at work
imagination at work
Add here only if ordering High Order Wavelength
(2 Fiber units only)
B7746AV
Receiver
Product Type Connector Type
TFC
Transmitter FC Type
RST
Receiver ST Type
Enclosure
ERStandalone
Loading...