Interlogix 430211004 Specsheet

Product Data Sheet

430211004

T-525W

Overview

Transition™ Series multi-technology access readers feature simultaneous compatibility with multi-vendor credential technologies—UTC and HID 125 kHz Proximity, HID Corporate 1000 Proximity, 13.56 MHz contactless smart card technologies for MIFARE® Card Serial Number (ISO 14443A), MIFARE/DESFire Card Serial Number, and Vicinity Card Serial Number (ISO

15693), including HID iCLASS® Card Serial Number—all in one reader. With this remarkable technology combination, security administrators can now deploy the Transition readers into existing or new facilities or systems—continuing to serve existing card-carrying users while migrating to the latest in security and smart-card technology advancements.

No matter which credential technology an organization currently employs, Transition readers allow continued use of existing systems and features—but more importantly, they also offer the ability to transition to new and more secure smart card technology. Transition readers offer security system administrators an economical solution to migrate to this new technology and better secure their businesses, all on their own timelines and budgets.

Supported Card Technologies :

• UTC ProxLiteTM, ISO ProxLite, and ProxLite key fobs and tags

• HID 125 kHz ProxCard II, ISOProx II, ProxKey II, ProxCard and Corporate 1000 (custom formats)

• MIFARE ISO 14443A Card Serial Number (CSN)

• MIFARE/DESFire CSN

• Vicinity ISO 15693 CSN

• HID iCLASS CSN

Standard Features

Configuration card (supplied) sets the Transition

reader to 2-state or 4-state supervised F/2F mode, or for Wiegand data output (T-500SW versions only).

Supports UTC and HID Corporation (including

Corporate 1000) Proximity, MIFARE CSN (ISO 14443A), MIFARE/DESFire CSN, and Vicinity CSN (ISO 15693) credentials, including HID iCLASS CSN

Accepts 6-16 VDC power input

Allows easy migration from Proximity to Mifare, and

Vicinity Smart Card technologies

Offers high-reliability, consistent read-range

performance, and low-power consumption

Installs on both metal and non-metal surfaces

Provides tri-color LED and beep indication for status,

alarm, and tamper conditions

Internal tamper alarm alerts security personnel if the

reader is breached

430211004

T-525W

Specifications

Colour

Certifications

Dimensions (W x H x D)

Operating temperature

IP Rating

Relative humidity

Wiring

Cabling distance

System compatibility

MicrocontrollersMicro/5-PX and Micro/5-PXN, Micro/PX-2000 and Micro/PXN-2000

Access control systemsPicture Perfect Editions 1.7 or higher, and microcontroller firmware 1.72 or

Access control systemsSecure Perfect Editions 5.0 or higher, and microcontoller firmware 5.0.02 or

Credentials

Proximity (125 KHz)ProxLite, ISOProx, key fobs, and tags (Note: Proximity Perfect cards are not

Vicinity ISO 15693Infineon My-D 2K-S, 2K-P, 10K-S, 10K-P, SLI-2, key fobs, and tags

Ordering Information

Part No. Description

430211004

Read Range

Grey, charcoal, and black

FCC

UL 294

T-500SW/W : 44 x 148 x 30 mm

T-520SW/W and T525SW/W : 148.6 x 114.3 x 31.7 mm

-25 to 65°C

IP 65

0 to 95%, non-condensing

GE F/2F : 4 conductors (min.)

Wiegand : 5 conductors (minimum)

GE F/2F systems : up to 914 m at 12VDC

Wiegand output : up to 152 m

higher

For detailed system compliance specifications, refer to the reader installation guide

supported)

Mifare (ISO 14443A) Mifare Standard, Mifare Light, Mifare Ultra Light, key fobs, and tags

T-525W 1-gang, gray, and 12 key pad*

Intelligent Supervision

Distances may vary depending on environment.

Model T-500SW/W:

• UTC Proximity—up to 8.89 cm

• HID Proximity and Corporate 1000—up to 8.89 cm

• MIFARE and MIFARE/DESFire—up to 2.54 cm Ultralight cards not supported

• Vicinity—up to 8.89 cm

• iCLASS—up to 8.89 cm

Model T-520SW/W, T-525SW/W:

• UTC Proximity—up to 15.24 cm

• HID Proximity and Corporate 1000—up to 15.24 cm

• MIFARE and MIFARE/DESFire—up to 2.54 cm Ultralight cards not supported

• Vicinity—up to 15.24 cm

• iCLASS—up to 15.24 cm

“SW” series of Transition readers provides superior value when performance-matched with select access control platforms. UTC offers intelligent supervision (F/2F Supervised mode) that continuously monitors communication between the access control panel, the reader at the door, and door contact and Request-to-Exit (REX)equipment. The unique four-state supervision of the Transition readers monitors and reports cut and short-circuit lines. There’s also an internal tamper-alarm mechanism, so security staff are immediately notified if a reader is tampered with, a door is breached or a cable is cut or shorted. Tri-color LED and audible alerts indicate status, alarm and perimeter-tampering conditions—giving you more security than is possible with conventional Wiegand-based installations.

As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest product specifications, visit UTC Fire & Security online or contact your sales representative.

IPS-HQ-430211004-2015-06-8 09:10:13