Intercom PREMIUM 400 - INOX Use And Maintenance Manual

EXTERNAL SUCTION

VACUUM PACKAGING MACHINES

PREMIUM

USE AND MAINTENANCE MANUAL

2

WARRANTY RULES FOR OUR

VACUUM-PACKING MACHINES

Dear Customer,
In order to avoid any misunderstanding about our warranty policy, please note the
following:

VACUUM PUMP

is not intended to be replaced by the supplier, even if within warranty
time, without a previous return of the disputed part.

A misuse of vacuum pumps for 2 or 3 months (Packing of hot, wet or
corrosive products, as well as liquids) might prevent any pump from working
properly.
It is therefore necessary to send these pumps back to the manufacturer, in
order to perform accurate checking and/or cleaning.

OUR COMPANY WON’T DELIVER ANY BRAND NEW PUMP
BEFORE RECEIVING THE DISPUTED ONE BACK!

As far as the other internal components are concerned (namely transformers,
micro switches, electronic board… etc.), they do not follow this general rule:
they are all internal components which do not suffer from mechanical wear.

3

CHAPTER 1

Instruction Handbook

The Instruction Handbook is a document issued by the Manufacturing Company and is a part of the machine. This
document is properly identified for any further reference.

All rights reserved. No information disclosure would be allowed, without having been previously approved by the
manufacturer.

Aim of the document

This handbook contains the information necessary to the customer and qualified staff for a proper installation, use and
maintenance of the machine.

Safety precautions and manufacturer’s liability

All operator-machine interaction relating to the intended use of the machine and its overall life cycle has been carefully and
thoroughly analysed during the design phase and the drafting of the Instruction handbook.
It is nevertheless understood that experience, adequate training and common sense of anyone who operates the machine are
vital.
Manufacturer is NOT liable in case of damage to persons or objects if one or more of the following circumstances apply:
_ lack of compliance with safety precautions or specific warnings described in this handbook
_ any improper use of any part of machinery
_ any use of unauthorized spare parts
_ any use of machinery by unauthorized staff

Reference to standards

This document is drawn up in accordance with following indications:

- Attachment “I” of Machinery Regulation 89/392/ CEE and following issues: point 1.7.4

- UNI EN 292/2 – 1992, point 5.5

MACHINE MOD. V HZ

SERIAL N.

SHIPMENT DATE

TECH. ENGINEEER