Intercoax EPR-111 Installation Manual
EPR-111
Installation Guide
Caution
Please install the device following the installation guide.
Do not touch the device and cable with wet hands.
Keep away from moisture and shock.
Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
Indoor use only.
Do not use for other purposes.
Do not disassemble or modify this device.
Do not put any sticker or paint on it.
If this device is defective or malfunctioning, please unplug the cables
immediately and contact dealer or service center.
Overview
EPR Series are Ethernet & PoE Repeaters that make possible to
overcome max 100m distance limitation of the network configuration.
For more distance extension, the devices can be added by daisy-chaining
(up to 600m)
It is cost effective and easy installation solution for all kind of PoE
(IEEE802.3af / 15W) compliant devices such as IP cameras,
Network Switch, VoIP Phone, etc.
Installation Guide
1
Product Details
PoE IN PoE OUT
2
EPR-111 is powered by PSE (Power Sourcing Equipment) such as PoE Switch
or PoE injector and it extends the power to other PoE devices without
additional power adapter.
PSE
PoE Switch PoE NVR PoE Injector
3
Connec RJ45 from PSE to “PoE IN (Red Color port)”,
Data / PoE LED shows the operation of the product.
Bracket
PoE IN
Connect RJ45 from “PoE OUT (Black Color port)” to the PoE devices such as
4
IP Camera, Data / PoE LED Shows the operation of the product.
PoE OUT
Application
1
2
3
Specification
Data PoE
Bracket
PoE OUT PoE IN
Ethernet & PoE Repeater For IP Cameras
Data PoE
Bracket
PoE OUT PoE IN
Ethernet & PoE Repeater For IP Cameras
Bracket
Data PoE
200m
Bracket
Data PoE
Bracket
200m
430m
Data PoE
Bracket
PoE OUT PoE IN
Ethernet & PoE Repeater For IP Cameras
630m
Data PoE
PoE OUT PoE IN
Ethernet & PoE Repeater For IP Cameras
Data PoE
Bracket
Bracket
Data PoE
Bracket
Data PoE
PoE OUT PoE IN
Ethernet & PoE Repeater For IP Cameras
200m
Bracket
Data PoE
Data PoE
Bracket
PoE OUT PoE IN
Ethernet & PoE Repeater For IP Cameras
Bracket
Data PoE
Model
Interface
LAN / PoE In
LAN / PoE Out
Transmission Rate
Transmission Distance
LED Indication
PoE
Mechanical
Ethernet
Power
Standards
Max. Power
Dimension
Weight
Operating Temp
Environment
Storage Temp
Relative Humidity
1 * RJ45 - 10/100 Base-T with Auto-detect MDIX
1 * RJ45 - 10/100 Base-T with Auto-detect MDIX
130m (Max. 200m Between EPR-111s)
68.4(L) x 40.9(W) x 21.8(H)mm
EPR-111
100Mbps Full Duplex
1 - Data(Green)
1-PoE(Yellow)
IEEE802.3af(PoE)
Max. 15W
72.5g
0 ~ 60°C
-20 ~ 80°C
10% ~ 90%
Warranty
This device has passed the quality control and product inspection.
Please install and use according to the installation guide.
The warranty period for this product is 24 months from the date of purchase.
Any damages or breakage from user's abuse, accident, modification
or natural disasters will not be covered manufacturer's warranty.
Customer Service
Please visit below website for more detail information.
http://www.intercoax.com
Intercoax Co., Ltd.
TEL : +82-31-365-3133
FAX : +82-31-365-3135
E-mail : info@intercoax.com
Loading...