Interactive Toy Concepts 47XXX Users Manual
POLARIS LICENSED MERCHANDISE Logo in black and ITC Logo in color
here
Any Visuals and graphics here…
Must have ROAD-RAGE LOGO here
Please emphasize the word visually ATV
---------
CAUTION: ELECTRICALLY OPERATED PRODUCT:
NOT RECOMMENDED FOR AGES UNDER 8 YEARS OF AGE. AS WITH ALL ELECTRIC
PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE TO
PREVENT ELECTRIC SHOCK.
INPUT: AC 120V 60Hz 10W
OUTPUT: DC 9V 300mA
-Road-Rage is a registered trademark of Interactive Toy Concepts Inc.
www.interactivetoy.com
Age Rating : 8+ (in a graphical format)
Instruction Manual
Congratulations on the purchase of your RC Sportsman 800 All Terrain
Vehicle (ATV) manufactured by Interactive Toy Concepts Inc under license
with POLARIS INDUSTRIES . This Polaris Sportsman 800 runs on grass, dirt,
snow, gravel, sand, pavement and carpet. It’s a durable go anywhere ATV
just like the real thing! It also has a switchable gearbox offering high torque or
high speed. It features realistic rubber tires, offroad tracks and working
lights and driving figure. It’s ready to run out of the box, includes one 7.2V
battery and charger. This package requires one 9V battery (not included) for
the transmitter.
<We need a picture here showing everything in the box and notations to
describe what is what
Unpacking and contents
To prevent damage during shipping, the ATV is securely fastened in the
package. Please ensure that all the tie down and fastening locations are
unfastened before attempting to remove the snowmobile.
The Sportsman ATV --Æ
Radio Transmitter and Antenna -Æ
Battery and Charger -Æ
Windshield -Æ
Tracks -Æ
Cargo Box -Æ
Instruction Manuals Æ
Wheel Wrench -Æ
Operating Instruction
Battery Pack Care and Cautions:
Use only a fresh battery and battery pack of the required size and type.
If you do not plan to use the vehicle for several days, remove the battery from
the transmitter and the battery pack from the vehicle.
Do not mix old and new batteries. Do not mix the different type of batteries -
alkaline, standard (carbon zinc), or rechargeable (Nickel Cadium) or Ni-Mh
(Nickel Metal Hydride)
Never leave dead or weak batteries in the vehicle
Dispose of old batteries promptly and properly; do not bury or burn them.
Do not charge non-rechargeable batteries
Insert batteries with the correct polarity
Do not short the supply terminals
Remove rechargeable batteries from the toy before being charged
Keep the package and this instruction manual since it contains important
information
Never allow the battery pack to become hot during charging - this will cause
permanent damage. Warm is okay - hot is not!
-Never leave a battery unattended while it is being charged.
-Never recharge a hot battery. Always allow it to cool before recharge.
-If the battery is not completely discharged before recharging, the charging
time may be reduced. Again, do not allow the battery to get hot!
-The AC adapter should be examined periodically to ensure that it is
undamaged. Failure to do this may result in the risk of fire, electric shock, or
injury to people. In the event that the adapter shows signs of abuse, it should
not be used until repaired by a certified technician.
-Install or replace the batteries by adult only.
- Do not overcharge the battery pack by letting it charge for too long.
-Rechargeable batteries are to be charged only under adult supervision.
Battery Installation for the Transmitter:
The transmitter comes with a telescopic antenna, please insert the antenna to
the top portion of the transmitter. The Transmitter requires one 9-Volt battery
(available separately). For the best performance and longest life, we
recommend an alkaline battery. Follow these steps to install the battery in the
transmitter.
1. Remove battery compartment cover by sliding it in the direction of the
arrow shown on the compartment cover.
2. Place the battery in the compartment according to the polarity symbols (+
and -) marked inside.
3. Replace the cover and snap it shut. When the transmitter range decreases,
replace battery
Loading...