17. Bitte beachten sie folgendes ............................................................................... 12
Seite 1 von 12 DE
Page 3
2. Hinweise
Vermeiden Sie einen harten Aufprall des Gerätes.
Verwenden Sie das Gerät nicht in extrem kalten, heißen, feuchten oder staubigen
Gebieten. Setzen sie es ebenfalls keinen direkten Sonnenstrahlen aus.
Führen Sie häufiger Datensicherungen durch, um einen möglichen Datenverlust zu
vermeiden.
Vermeiden Sie das Benutzen in stark magnetisierten Feldern.
Schützen Sie das Gerät vor Nässe. Wenn Feuchtigkeit in das Gerät eintritt,
schalten Sie es bitte unverzüglich aus, danach säubern und trocknen Sie bitte das
Gerät.
Verwenden Sie bitte keine chemischen Lösungen, um das Gerät zu säubern. Hier
bitte nur ein trockenes Tuch verwenden.
Wir sind nicht haftbar für Schäden oder Datenverlust bei einer Fehlfunktion,
fehlerhafter Handhabung, eigenhändiger Reparatur des Geräts oder Wechseln des
Akkus.
Bitte zerlegen Sie das Gerät nicht in Einzelteile, und versuchen Sie bitte nicht, es
selbst zu reparieren, da die Garantie in diesem Fall erlischt.
Bei Verwendung von Ohr- oder Kopfhörern in zu hoher Lautstärke kann es zu einer
dauerhaften Schädigung des Gehörs kommen.
3. Funktionen
MP3&WMA Player
AVI Video Player
JPEG / BMP Bildbetrachter
Memory Card Lesegerät
Ordner Navigation
Wechseldatenträger
Spiel
Wiederaufladbarer Li-polymer Akku
Kundenspezifische Einstellung
4. Packungsinhalt
Bitte überprüfen Sie den Packungsinhalt auf Vollständigkeit
Intenso Video Scooter
Stereo - Kopfhörer
Konvertierungssoftware (AVI-Format)
USB Kabel
Bedienungsanleitung + Garantiekarte
Seite 2 von 12 DE
Page 4
5. Vor dem Gebrauch
Verbinden mit dem PC
Bei den Betriebssystemen Windows 98/SE installieren Sie bitte einen Treiber, bevor Sie
den Player mit dem PC verbinden (Download finden Sie unter www.intenso.de).Für die
Betriebssysteme WIN 2000/XP/ME/Vista und Windows7 ist eine Installation des Treibers
nicht nötig.
Gehen Sie hier bitte wie folgt vor:
(1) Entfernen Sie bitte vor Benutzung die Plastikkarte aus dem Micro SD Karten-Slot.
(2) Verbinden Sie den Player mit dem USB-Anschluss des PC.
(3) Es öffnet sich das Fenster “Intenso”. Nun können Sie die Daten von ihrer Festplatte
auf dem Wechseldatenträger speichern.
Sicheres Entfernen vom PC
Für Windows 2000/XP/ME/Vista und Windows7 :
Klicken Sie mit der rechten Maustaste unten rechts in der Taskleiste auf das Symbol
„Hardware sicher entfernen“. Aus dem erscheinenden Kontextmenü wählen Sie bitte den
Punkt „USB- Massenspeichergerät-Laufwerk entfernen“ mit der linken Maustaste aus.
Vergewissern Sie sich bitte, dass die Datenübertragung vollständig abgeschlossen ist.
Nun können Sie das Gerät entfernen.
Für Windows 98/SE:
Wählen Sie das Gerät im „Gerätemanager“ mit der linken Maustaste aus. Klicken Sie nun
auf den Menüpunkt „Entfernen“. Stellen Sie auch hier sicher, dass die Datenübertragung
vollständig abgeschlossen ist.
Das Gerät kann nun vom PC getrennt werden.
Laden des Akkus:
Das Gerät verfügt über einen eingebauten Li-polymer Akku. Der Akku wird über die USBVerbindung zu Ihrem PC geladen.
Bei der ersten Benutzung des Gerätes achten Sie bitte darauf, dass Sie den Akku
vollständig aufladen, dieser Vorgang dauert in der Regel 3 Stunden.
Um den Akku aufzuladen, verbinden Sie bitte das Gerät über das USB-Kabel mit dem PC.
Der Ladevorgang startet automatisch.
Wenn Sie den aktuellen Status des Ladevorganges erfahren möchten, trennen Sie bitte
das Gerät von dem PC. Sie sehen auf dem Display oben rechts ein Batteriesymbol.
Leuchtet dieses Symbol grün, ist der Akku vollständig aufgeladen.
Hinweis: Für eine optimale Leistungsfähigkeit muss der Li-polymer Akku regelmäßig
genutzt werden. Sollte dies nicht der Fall sein, laden Sie den Akku mindestens einmal pro
Monat vollständig auf.
Seite 3 von 12 DE
Page 5
Nutzung einer Micro SD Card:
Das Gerät hat einen microSD Karten Steckplatz.
Benutzung einer microSD Card:
(1) Stecken Sie die Micro SD Karte in den Card Slot
(2) Drücken und halten Sie den Menü Button, um das Hauptmenü aufzurufen.
(3) Wählen Sie "Ordner Übersicht" und drücken den Menu Button, um in die "Ordner
Übersicht" zu gelangen
(4) In der Ordner Übersicht finden Sie 2 Verzeichnisse:
"Interner Speicher" und "Micro SD-Karte".
Um Audio / Video Dateien von der Micro SD Card abzuspielen, wählen Sie das
Verzeichnis " Micro SD-Karte " aus.
Bedienungselemente
A. LCD Display
B. Play/Pause: Einschalten / Ausschalten der Software. Pause Funktion.
C. Enter/Escape: Länger gedrückt halten, um in das Hauptmenü zu gelangen. Kurz
drücken, um die Auswahl zu bestätigen oder die Ordner Navigation aufzurufen.
D. Rückwärts: Vorheriger Titel. Bewegung nach oben.
E. Vorwärts: Nächster Titel. Bewegung nach unten.
F. VOL-: Verringerung der Lautstärke.
G. VOL+: Erhöhung der Lautstärke.
H. Kopfhörer Eingang
I. Power Switch: Einschalten / Ausschalten des Players
J. USB Port: Verbindung mit dem Computer
K. Micro SD Card Slot
Seite 4 von 12 DE
Page 6
Ein- und Ausschalten,
Einschalten
(1) Verschieben Sie den ON/OFF Schalter nach rechts auf ON.
(2) Drücken Sie die PLAY/PAUSE Taste und halten Sie diese Taste gedrückt bis sich
das Display einschaltet.
Ausschalten,
(1) Drücken Sie die PLAY/PAUSE Taste und halte Sie diese gedrückt bis sich das
Display ausschaltet.
(2) Verschieben Sie den ON/OFF Schalter nach links auf OFF.
Anmerkung: Dieser Player hat eine Energiespar Einrichtung, das Gerät schaltet sich
automatisch aus wenn es mehr als drei Minuten unbenutzt ist.
6. Bedienung
Play/Pause
Betätigen Sie die Taste „B“ (Play/Pause) für Abspielen oder Pause.
Lautstärke bei Musik-/ Videowiedergabe
Drücken Sie die Taste „F“ (VOL-) bzw. „G“ (VOL+) um die Lautstärke zu regeln.
Auswahl des nächsten Tracks (nächster Titel)
Kurzes Betätigen der Taste „E“ (Vorwärts).
Auswahl des vorherigen Tracks (vorheriger Titel)
Kurzes Betätigen der Taste „D“ (Rückwärts).
Tasten Sperren/ Entsperren
Drücken Sie die Tasten „C“ (Enter/Escape) und „G“ (VOL-) gleichzeitig.
A-B Repeat bei der Musikwiedergabe
Um einen bestimmten Ausschnitt eines Tracks in Schleife abzuspielen.
(1) Während des Abspielens die Taste „F“ (VOL+) betätigen und halten, um den
Startpunkt der Schleife festzulegen.
(2) Betätigen und halten Sie die Taste „F“ (VOL+) erneut, um den Endpunkt der
Schleife festzulegen.
(3) Durch das Bestätigen der Taste „F“ (VOL+) wird die Schleife beendet.
Seite 5 von 12 DE
Page 7
7. Abspielen von Musik
Musik-Modus
Drücken und halten Sie die Enter/Escape-Taste, um in das Hauptmenü zu gelangen.
Wählen Sie “Musik” und bestätigen Sie mit der Enter/Escape-Taste.
Starten Sie die Wiedergabe mit der Enter/Escape-Taste.
Ordner Übersicht
(1) Drücken Sie im Musik-Modus kurz die Enter/Escape-Taste.
(2) Mit der Vorwärts/ Rückwärts-Taste können Sie den gewünschten Ordner oder
Musiktitel auswählen. Mit der Enter/Escape-Taste bestätigen Sie ihre Auswahl.
8. Video
(1) Drücken und halten Sie die Enter/Escape Taste, um in das Hauptmenü zu
gelangen.
(2) Wählen Sie mit der Vorwärts/ Rückwärts-Taste das Video aus.
(3) Mit der Enter/Escape-Taste können Sie einen Videofilm starten. Die
Vorwärts/Rückwärts Taste ermöglicht die Auswahl einer beliebigen Video-Datei aus
ihrem Verzeichnis.
(4) Mit der Enter/Escape-Taste können Sie während der Wiedergabe die Ordner-
Navigation aufrufen.
Hinweis: Dieser Player kann nur AVI-Formate abspielen. Zum verwenden von RM,
RMVB, MPG, MPEG, WMV, DAT, VOB Formaten benötigen Sie die mitgelieferte, unter
Windows lauffähige Konvertierungssoftware.
9. Bilder
Anzeigen von Bilder
(1) Drücken und halten Sie den Enter/Escape-Button, um in das Hauptmenü zu
gelangen
(2) Wählen Sie mit der Vorwärts/Rückwärts-Taste Foto aus.
(3) Wenn Sie ein Foto ausgewählt haben, gelangen Sie mit der Vorwärts/ Rückwärts
Taste zum nächsten Bild. Mit der Play/Pause-Taste können Sie eine Diashow
starten und stoppen. Mit der Enter/Escape-Taste können Sie während der Diashow
die Ordner Übersicht aufrufen.
Hinweis: Das Gerät kann nur Bilder im JPG / BMP -Format wiedergeben.
Seite 6 von 12 DE
Page 8
10. Text
Lesen der .txt Files
(1) Drücken und halten Sie die Enter/Escape Taste, um in das Hauptmenü zu gelangen
(2) Wählen Sie “Text” aus und drücken Sie die Enter/Escape Taste zum Bestätigen.
(3) Wählen Sie mit der Vorwärts/Rückwärts-Taste eine Textdatei aus und bestätigen
Sie mit der Enter/Escape Taste.
(4) Drücken Sie die Vorwärts/Rückwärts-Taste, um entweder zum oberen Teil oder zum
unteren Teil des Textes zu gelangen, welcher auf dem Display nicht dargestellt wird.
Oder wählen Sie mit der Play/Pause-Taste das automatische Weiterscrollen aus.
(Unter Einstellungen können Sie das Zeit-Intervall zwischen 2 und 10 sek. selbst
auswählen: “Einstellungen -> Diashow -> Text”).
(5) Während Sie lesen, können Sie mit dem Bookmark eine Stelle zum späteren
Weiterlesen markieren. Dieses Vorgehen wird im nächsten Punkt näher
beschrieben.
Hinweis: Sie können bis zu 3 Lesezeichen speichern.
Lesezeichen erstellen
(1) Gehen Sie auf die Stelle, welche Sie kennzeichnen möchten.
(2) Drücken Sie kurz die VOL+ Taste. Es erscheint „Save Bookmark“ im Display.
(3) Mit der Vorwärts/ Rückwärts-Taste wählen Sie eine Bookmark Nummer aus.
Bestätigen Sie ihre Auswahl mit der Enter/Escape-Taste. Das Lesezeichen ist
gespeichert. Es wird von der ersten Zeile der aktuellen Seite gestartet.
(4) Um die markierte Seite zu laden, drücken Sie bitte kurz auf die VOL-Taste, um die
gespeicherten Lesezeichen aufzurufen. Wählen Sie ein Lesezeichen aus und
bestätigen Sie es mit der Enter/Escape-Taste. Sie werden nun zu dieser Seite
geführt.
Hinweis: Wenn Ihre Textdatei nicht gestartet wird, liegt es daran, dass ihr gewähltes
Textformat nicht unterstützt wird. Wählen Sie bitte ein anderes Textformat aus.
11. Durchsuchen aller Dateien
Um alle gespeicherten Dateien im Player zu durchsuchen, gehen Sie wie folgt vor:
(1) Drücken und halten Sie die Enter/Escape Taste, um in das Hauptmenü zu
gelangen.
(2) Wählen Sie den Menüpunkt „Ordner Übersicht“ aus. Sie können nun zwischen
“interner Speicher” und “Micro SD-Karte” wählen. Bestätigen Sie mit der Menü-
Taste.
(3) Mit der Vorwärts/ Rückwärts-Taste wählen Sie die gewünschte Datei aus und
bestätigen Sie die Auswahl mit der Enter/Escape-Taste.
12. Löschen einer Datei
(1) Wählen Sie in der Ordner-Übersicht die Datei aus, welche Sie löschen möchten.
(2) Drücken Sie kurz die VOL-Taste. Es erscheint eine Dialogbox.
Seite 7 von 12 DE
Page 9
(3) Wählen Sie mit der Vorwärts/Rückwärts-Taste “Ja” aus und bestätigen Sie mit der
Enter/Escape-Taste.
13. Spiel
Dieses Gerät verfügt über das Spiel Tetris World. Um dieses Spiel zu starten, wählen Sie
im Hauptmenü die Option “Spiel” aus und bestätigen Sie es mit der Enter/Escape-Taste.
Spiel starten
Drücken Sie die „PLAY/PAUSE“-Taste
Bewegen des Blockes nach rechts oder links
Drücken Sie die Rückwärts oder Vorwärts-Taste
Drehen des Blockes
Drücken Sie die Enter/Escape-Taste
Einbringen des Blockes
Drücken Sie die VOL-Taste
Verlassen des Spiels
Drücken und Halten Sie die Enter/Escape Taste
14. System- Einstellungen
Anpassen der Einstellungen:
(1) Wählen Sie im Hauptmenü den Punkt “Einstellungen” aus.
(2) Mit der Vorwärts/Rückwärts-Taste wählen Sie den von Ihnen gewünschten Menü-
Punkt aus und bestätigen Sie diesen mit der Enter/Escape-Taste, um die
Einstellungen zu ändern. Mit der „Play/Pause Taste“ kehren Sie zurück.
Musik
Wiederholung
(1) Titel einfach: Spielt den aktuellen Track und stoppt dann die Wiedergabe.
(2) Titel wiederholen: Wiederholt den aktuellen Track.
(3) Ordner einfach: Wiederholt die Titel in dem ausgewählten Ordner einmal und
stoppt dann die Wiedergabe
(4) Ordner wiederholen: Wiederholt alle Titel aus dem aktuellen Ordner.
(5) Alle Titel einmal: Spielt alle gespeicherten Titel ab und beendet die Wiedergabe
mit dem letzten Titel.
(6) Alle Titel wiederholen: Wiederholt alle gespeicherten Titel.
(7) Intro Funktion: Spielt die ersten 10 Sek. jeder Audio-Datei.
Wiedergabemodus
(1) Normale Wiedergabe: Spielt Audiodateien nach der Reihenfolge
(2) Zufällige Wiedergabe: Zufällige Wiedergabe der Titel.
Equalizer auswählen
Normal, 3D, Rock, Pop, Klassik, Bass, Jazz, Benutzerdefinierter Equalizer
Seite 8 von 12 DE
Page 10
Benutzerdefinierter Equalizer
(1) Drücken Sie die Vorwärts oder Rückwärts Taste, um die EQ-Spalte zu wählen.
(2) Betätigen Sie die VOL+ / VOL- Tasten, um die Werte einzustellen.
(3) Wiederholen Sie das Drücken der Vorwärts-Taste bis der Cursor auf dem “JA”-
Button ist und bestätigen Sie mit der Enter/Escape-Taste.
(4) Wählen Sie nun im EQ- Menü die Option “Benutzerdefinierter Equalizer” aus, um
die Einstellungen zu nutzen.
Bild & Text Diashow
Text
Wählen sie das Zeitintervall für das Umblättern von der aktuellen Seite zur nächsten Seite.
Bilder
Wählen Sie das Zeitintervall zwischen dem aktuellen Bild und dem nächsten Bild.
Display Einstellungen
Beleuchtungszeit
5 Sekunden,
10 Sekunden,
15 Sekunden,
20 Sekunden,
30 Sekunden,
Immer an
Helligkeit
(Bestimmen Sie die Helligkeit des Display)
Beleuchtungsmodus
Normal
Energiesparmodus (Schaltet die Displaybeleuchtung aus, wenn keine Bedienung erfolgt)
System
Über: Informationen über das Produkt
Firmware Update: Upgrade der Firmware
Werkseinstellungen: Lädt die Werkseinstellungen
Hier können Sie unterschiedliche Sprachen auswählen
Seite 9 von 12 DE
Page 11
15. Fehlerbehebung
Problem – Mögliche Gründe – Lösung Problem
Es erscheint nichts auf dem Display.
(1) Der Akku ist leer.
Laden Sie den Akku.
(2) Die Tasten sind gesperrt.
Entriegeln Sie die Tastensperre wie unter „6. Bedienung“ beschrieben.
Das Gerät reagiert nich t, wenn die Play-Taste betätigt wird.
(1) Die Tasten sind gesperrt.
Entriegeln Sie die Tastensperre wie unter „6. Bedienung“ beschrieben.
Bei der Wiedergabe fehlt der Ton.
(1) Die Lautstärke ist zu gering
Erhöhen sie die Lautstärke im Lautstärkemenü
(2) Audio-Datei defekt
Bitte übertragen sie die Datei erneut
Es kann keine Verbindung zum PC hergestellt werden.
(1) Der Treiber wurde nicht korrekt installiert
Installieren Sie den Treiber erneut.
(2) Bitte führen sie ein Mainboardupdate aus
(Beachten sie hierzu die Hinweise des Herstellers)
Der Anzeigewert der Zeit wechselt ständig.
(1) Die Bit-Rate des MP3-Files wechselt während der Wiedergabe.
Bitte benutzen Sie eine einheitliche Bit-Rate beim Komprimieren.
Der PC meldet einen Fehler beim Verbinden mit dem Gerät
(1) Der Player wurde während der Datenübertragung vom PC getrennt.
Bitte trennen Sie das Gerät niemals während der Datenübertragung.
Der angegebene Speicher des Gerätes stimmt mit dem wirklichen Speicher
nicht überein.
(1) Ein Teil des Speichers wird für Software, Formatierung und
Displayeigenschaften genutzt.
MP3-Daten werden nicht richtig abgespielt.
(1) Die MP3- Daten wurden in ein falsches Format komprimiert, beispielsweise in
MPEG 1 oder 2.
Löschen Sie die Dateiformate, welche nicht unterstützt werden.
Seite 10 von 12 DE
Page 12
Video-Daten können nicht abgespielt werden.
(1) Das Format wird nicht unterstützt.
Das Video Format muss AVI sein. Wenn dies nicht der Fall ist, konvertieren sie
es bitte. Achten sie dabei auf die Formatgröße 128x160 Pixel
(2) Die Video-Datei ist defekt.
Übertragen sie ihre Video Datei erneut
Die Fotos werden nicht angezeigt.
(1) Das Dateiformat wird nicht unterstützt.
Konvertieren Sie das Foto bitte in ein JPG- Format.
(2) Das Bild hat eine Auflösung mit mehr als 3520x2816 Pixel
Das Gerät unterstützt eine maximale Auflösung von 3520x 2816 Pixel. Stellen
Sie sicher, dass diese Auflösung nicht überschritten wird.
Die Textdatei kann nicht gelesen werden.
(1) Das Format wird nicht unterstützt.
Bitte benutzen sie das .txt –Format
16. Technische Daten
Unterstütze Kartenformate
microSD bis 2GB & microSDHC 4 | 8 GB
Akkutyp
Wiederaufladbarer Li-polymer Akku
Akkudauer
Max. 10 Stunden
LCD
1,8“ Zoll TFT Bildschirm
Kopfhörer
5mW+5mW
Video Format
AVI (XviD) 128x160
Audio Formate
MP3, WMA
Foto Format
JPEG / BMP
Bildauflösung
7000X7000 Pixel (Max.)
Bit Rate
MP3: 8-320kbps;
WMA: 8-320kbps
Seite 11 von 12 DE
Page 13
SNR
(INTENSO)
®
49377 Vechta
Germany
www.intenso.de
>90dB
USB Port
USB2.0
Betriebsbereit zwischen
0 Celsius ~ +50 Celsius
Lagertemperatur zwischen
-20 Celsius ~ +65 Celsius
Betriebsbereit bei einer rel. Luftfeuchtigkeit von
20% ~ 90% (40 Celsius)
Lagerfähig bei einer rel. Luftfeuchtigkeit von
20% ~ 93% (40 Celsius)
17. Bitte beachten sie folgendes
(1) Plug & Play ist nur bei Windows 2000/XP/Vista/Windows7 möglich.
Bitte installieren Sie bei Windows 98/SE den Treiber.
(2) Bitte entriegeln Sie die Tastensperre, um mit dem Gerät zu arbeiten.
(3) Bitte laden Sie die Batterie, wenn dieses im Display angezeigt wird.
(4) Bitte trennen Sie das Gerät vom PC nur wie erwähnt, um einen möglichen
Datenverlust zu vermeiden.
(5) Wenn die Aufnahmedatei sehr groß ist, dauert das Laden der Datei länger.
(6) Eine Kompatibilität des Lesegerätes zu allen erhältlichen Micro SD Karten kann
nicht garantiert werden.
(7) Entfernen Sie bitte vor Benutzung die Plastikkarte aus dem Micro SD Kartenslot.
(8) Softwareunterstützung für Windows 2000, Windows XP, Windows Vista, Windows7.
Seite 12 von 12 DE
Page 14
1. Index
1. Index ..................................................................................................................... 1
Protect the device from blows and don‟t drop it.Do not use the player in extreme heat or cold, or dusty or damp areas. Do not
expose it to direct sunshine.
Back up the data frequently in case of accidental data loss.
Avoid using the player in a strong magnetic field.
Keep the device away from water or other liquids. In the event that water or other
liquids enter the device, power off the product immediately, and clean the device.
Do not use chemical solutions to clean the device in order to avoid corrosion. Clean
it with a dry cloth.
We are not responsible for damage or lost data caused by malfunctions, misuse,
repairing the device or battery replacement.
Do not attempt to disassemble, repair or modify the product. This will void the
guarantee.
The use of earphones or headphones at high volume can cause permanent
damage to your sense of hearing.
3. Key Features
MP3&WMA Player
AVI Video player
JPEG / BMP image viewer
Memory card reader
Folder navigation
Removable storage device
Game
Rechargeable li-polymer battery
Customized settings
4. Package Content
Please check the package for the following items. If any one of them is missing, please
contact the vendor:
Intenso Video Scooter
Stereo earphones
USB cable
Application CD
User manual and warranty card
Page 2 of 12 GB
Page 16
5. Before Using
Connecting to the PC
If your PC‟s operating system is Windows 98/SE, please install a driver before connecting
the player to your PC. (Driver downloads are available at www.intenso.de). It is not
necessary to install a driver if your operating system is WIN 2000/XP/ME/Vista and
Windows7.
Please proceed as follows:
(1) Remove the plastic card from the Micro SD Card slot before use.
(2) Connect the player to a USB connector on the PC.
(3) The „Intenso‟ window opens. You can now save data from your hard disk to the
removable medium.
Safe removal from the PC
For Windows 2000/XP/ME/Vista/Windows7:
Right click the „Safely Remove Hardware‟ icon in the taskbar at the bottom right. Left click
„Remove USB storage device‟ in the context menu that appears. Please first make sure
that the data transfer has been completed.
You can now remove the device.
For Windows 98/SE:
Left click the device in the Device Manager. Now click the menu item „Remove‟. Make sure
in this case too that the data transfer has been completed.
You can now disconnect the device from the PC.
Charging the battery:
The device has a built-in rechargeable li-polymer battery. The battery is charged via the
USB connection to your PC. Before using the device for the first time, please make sure
that the battery is fully charged. This usually takes about 3 hours.
To charge the battery, connect the device to the PC using the USB cable. The charging
procedure begins automatically. If you wish to check the current status of the charging
procedure, please disconnect the device from the PC. You can see a battery symbol at the
top right of the display. If this symbol lights up green, then the battery is fully charged.
Note: for optimum performance, the li-polymer battery must be used regularly. If this is not
the case, fully charge the battery at least once per month.
Page 3 of 12 GB
Page 17
Using memory card
The device has a memory card slot for reading data from a micro-SD card.
To use a memory card,
(1) Insert a Micro-SD card into the card slot on the unit body.
(2) Press and hold the Enter/Escape button to display the main menu.
(3) Select “Navigation” and press the Enter/Escape button to enter the folder browser
mode.
(4) In folder browser mode, you will see two folders named “Inside Memory” and “SD
Card”. To play the audio or video files stored on the memory card, access the
“Inside Memory” folder.
Keys Description
A. LCD Display
B. Play/Pause: Turn on or turn off the device. Also play or pause audios.
C. Enter/Escape: Hold for a while to enter the main menu. Briefly press to confirm
selection confirm or enter the folder navigation mode.
D. Previous: Play the previous track. Also move up.
E. Next: Play the next track. Also move down.
F. VOL-: Turn down the volume.
G. VOL+: Turn up the volume.
H. Earphone Jack
I. Power Switch: Turn on or turn off the power
J. USB Port: Connect to a computer
K. Memory Card Slot: For inserting a Micro SD-card
Page 4 of 12 GB
Page 18
Power On/Off
To switch on,
(1) Slide the ON/OFF Switch to the right to turn on the power.
(2) Press and hold the PLAY/PAUSE button until the display starts.
To switch off,
(1) Press and hold the PLAY/PAUSE button until the display stop.
(2) Slide the ON/OFF Switch to the left to turn off the power.
Note: This player has a power-saving feature which enables the device to power off
automatically if it is idle for about 3 minutes.
6. Basic operation
Function
Play/Pause
Press the PLAY/PAUSE button to play or pause.
Adjust Volume
Briefly press the VOL+/VOL- button to decrease or increase volume.
Previous Track
Briefly press the PREVIOUS button.
Next Track
Briefly press the NEXT button.
Fast Forward
Press and hold the NEXT button.
Rewind
Press and hold the PREVIOUS button.
Lock/unlock buttons
To protect the buttons against being pressed accidentally or unlock buttons, hold down the
Enter/Escape button and the VOL- together.
A-B Repeat To repeat a specified section of a track,
(1) During play, press and hold the VOL+ button to select the start point of the repeat.
(2) Press and hold the VOL+ button again to select the stop point. The music section
between the start point and the stop point is repeated.
(3) To stop A-B repeat, press another time the VOL+ button.
Page 5 of 12 GB
Page 19
7. Playing music
Enter the music mode
Press and hold the Enter/Escape button to display the main menu. Use the
PREVIOUS/NEXT button to select “Music” menu, and press the Enter/Escape button to
confirm selection. Now you are in the MUSIC mode, refer music playing to the basic
operations.
Folder navigation
To navigate through folders:
(1) In the MUSIC mode, briefly press the Enter/Escape button to enter folder navigation
mode.
(2) Press the PREVIOUS/NEXT button to select a folder or track, and press the
Enter/Escape button to confirm selection, or press the PLAY/PAUSE button to
return.
8. Playing videos
(1) Press and hold the Enter/Escape button to display the main menu.
(2) Use the PREVIOUS/NEXT button to select the “Video” menu, and press the
Enter/Escape button to enter the video player mode.
(3) Press the PREVIOUS/NEXT button to search a video file that you want to play, and
press the Enter/Escape button to play. For detail information about playing, see the
“Basic Operation” section. (Note: During playing, you can briefly press the
Enter/Escape button to enter folder navigation mode.)
Note: This player can only play AVI videos. For other formats, you need to use the
conversion tool included on the driver CD to convert them. For detailed information about
the converter, see AVI Converter Quick User Guide on the CD.
9. Viewing photos
To view photos,
(1) Press and hold the Enter/Escape button to display the main menu.
(2) Select “Photo” and press the Enter/Escape button to confirm.
(3) Press the PREVIOUS/NEXT button to select a folder or image, and press
Enter/Escape to confirm.
(4) Select the photo that you want to display and press the Enter/Escape button to
enlarge it to the full screen.
(5) In the full screen mode, you can press the PREVIOUS/NEXT button to display the
previous or the next photo. Press the PLAY/PAUSE to start an automatic slide
show, or press the Enter/Escape button to enter folder navigation mode.
Note: Some images may not be displayed. Try to convert the image in JPEG / BMP.
Page 6 of 12 GB
Page 20
10. Reading Text
Reading
(1) Press and hold the Enter/Escape button to display the main menu.
(2) Select “Text” and press the Enter/Escape button to confirm.
(3) Press the PREVIOUS/NEXT button to select a .txt file, and press the Enter/Escape
button to open the selected file.
(4) Press the PREVIOUS/NEXT button to page up or page down, or press the
PLAY/PAUSE button to page up or down automatically (by setting the time interval
between 1 and 5 in Settings/Auto Slide show/Text).
(5) During reading, you can use the bookmark to mark the page for resume reading
later. For information about the bookmark, see “Using bookmark” section.
Using bookmark
(1) Go to the page that you want to mark.
(2) Press and hold the VOL button to display a “Save Bookmark” window for saving
bookmark.
(3) Press the PREVIOUS/NEXT button to select one line on the menu and press the
Enter/Escape button to confirm. The bookmark is saved. It starts from the first line
of current page.
(4) To read the page that you marked, briefly press the VOL button to display the “Load
Bookmark” window. Select the bookmark and press the Enter/Escape button to
confirm. You will be guided to that page.
Note: Some TXT file may not be read. This may because its format is not supported.
Skip it or reload another file.
11. Browsing all files
To browse all files stored in the player,
(1) Press and hold the Enter/Escape button to display the main menu.
(2) Select “Navigation” and press the Enter/Escape button to enter the browser mode.
(3) Press PREVIOUS/NEXT button to select a file that you want to view, and press the
Enter/Escape button to play or display it.
12. Deleting file
To delete a file,
(1) In the folder navigation mode, select the file that you want to delete.
(2) Press and hold the VOL button until a dialogue box appears.
(3) Use the PREVIOUS/NEXT button to select “YES” and press the Enter/Escape
button to confirm.
Page 7 of 12 GB
Page 21
13. Playing game
This player provides a popular and fun game - Tetris World. To activate the game, on the
main menu, select “Game” and press the MENU button to enter the gaming mode. Basic
operation is as follows:
Start game Press the PLAY/PAUSE button
Move the block left and right Press PREVIOUS an NEXT button
Rotate the block Press the Enter/Escape button
Insert the block Press the VOL- button
Exit the Game Press the play Button to pause the Game and hold
then the Enter/Escape Button
14. Customizing Settings
To customize the player settings:
(1) On the main menu, select the “Settings” option and press the Enter/Escape button
to enter the system settings mode.
(2) Press the PREVIOUS/NEXT button to select the settings option and press the
Enter/Escape button to confirm or press the Play/Pause button to cancel/return.
Music
Repeat Mode
(1) Once: Play current track once and then stop
(2) Repeat 1: Repeat current track
(3) Folder once: Play all audio files in the current folder and stop after playing
(4) Folder Repeat: Repeat all audio files in the current folder
(5) All Once: Play all audio files stored in the player and stop after playing all
(6) All Repeat: Repeat all audio files stored in the player
(7) Intro: Play the first 10 seconds of every audio file
Play mode
(1) Order: Play audio files in order
(2) Shuffle: Play audio files randomly
EQ Select
Normal, 3D, Rock, Pop, Classical, Bass, Jazz, User EQ
User EQ Set
(User-defined equalizer setting)
(1) Press the PRIVOUS/NEXT button to switch EQ column.
(2) Press the VOL+/VOL- button to adjust value.
(3) Repeat pressing the NEXT button until the cursor is on the YES button, and then
press the Enter/Escape button to confirm.
(4) Go to the EQ Select menu, and select User EQ to enable the equalizer setting.
Page 8 of 12 GB
Page 22
Auto Browse
Text Browse
(Set interval between the previous and the next page when the device is in auto page
up/down mode.)
Photo Browse
(Set interval between the previous and the next slide in auto slide show mode.)
Blight Mode
Normal
Power Save (Turn off the screen when there is no activity within a certain time)
System
About: Information about the product
Upgrade: Upgrade the firmware
Default Set: Restore the player to default setting
Power Off
(Set the continuous playing time before the player is turned off automatically.)
Off, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 120 minutes
Language
(Select language in which the on-screen text is displayed)
Here you can choose between different languages
Page 9 of 12 GB
Page 23
15. Troubleshooting
Problem Possible Cause Solution
The LCD displays nothing when the device is started.
(1) Battery is too low.
Charge the battery.
(2) The keys are locked.
Unlock the Hold switch by holding down the PLAY/PAUSE and VOL
The player doesn’t respond when the Play button is pressed to play an audio
No sound when playing an audio file.
The player cannot be connected to the PC.
The displayed time is changing constantly.
The PC has an error when you plug-in and unplug the player.
Total memory displayed on the player is not in accordance with the marked
Some of MP3 files cannot be played properly.
button.
file.
(1) The keys are locked by Hold switch
Unlock the Hold switch by holding down the PLAY/PAUSE and VOL
button.
(1) The volume is too low.
Adjust the volume.
(2) Bad audio file.
Delete or skip the file.
(1) The USB port is not supported by PC‟s motherboard.
Update or replace the PC‟s motherboard.
(1) The bit rate of the MP3 file is changing during playback.
Try to use fixed bit rate to compress the MP3 file.
(1) The player is disconnected from the PC abruptly while transferring files.
Do not disconnect the player from the PC when transferring files.
amount.
(1) Part of memory is used to store programs and display characters.
(1) The MP3 file is compressed by a standard, such as MPEG I Layer 1 or
Layer 2 that the player does not support.
1. Delete the unsupported MP3 files.
2. Use MPEG I Layer 3 standard to compress the unsupported MP3 files.
Page 10 of 12 GB
Page 24
The video cannot be played.
(1) The file format is not supported.
Make sure the video is in AVI format. If not, use the provided converting
tool to convert it.
(2) The video data is corrupted
The photo cannot be displayed
The TXT file cannot be read
Skip it or reload another file
(1) The file format is not supported
Try to use an image editor to convert it.
(2) The image resolution is beyond limitation of the device.
The device supports a maximum resolution of 3520 X 2816 pixels. Make
sure resolution of the image does not excess this limitation.
(1) The file format is not supported.
Skip it or reload another file.
16. Technical Specifications
Supported Micro SD-Cards
microSD up to 2GB & microSDHC 4 | 8 GB
Battery Type
Rechargeable li-polymer battery
Battery Life
Max. 10 hours
LCD Display
1.8-inch TFT screen
Earphone Power
5mW+5mW
Video Format
AVI (XviD) 128x160 pixels
Audio Format
MP3, WMA
Photo Format
JPEG / BMP
Image Resolution
7000X7000 pixels (Max.)
Bit Rate
MP3: 8-320kbps; WMA: 8-320kbps
Page 11 of 12 GB
Page 25
(INTENSO)
®
49377 Vechta
Germany
www.intenso.de
SNR
>90dB
USB Port
USB2.0
Operating Temperature
0℃ ~ +50℃
Storage Temperature
-20℃ ~ +65℃
Operating Relative Humidity
20% ~ 90% (40℃)
Storage Relative Humidity
20% ~ 93% (40℃)
17. Notice
(1) Plug & Play is available only with Windows 2000/XP/Vista/Windows7. Please install
the driver in the case of Windows 98/SE.
(2) Make sure all keys are enabled before operation. If they are locked, hold down the
PLAY/PAUSE and VOL button to unlock them.
(3) Please charge the battery immediately when the display indicates low battery, or
the device will be powered off automatically.
(4) Please disconnect the player from PC properly to avoid data loss.
(5) When the recorded voice file is too large, the response of the device may be slow.
(6) The device does not guarantee compatibility with all memory cards from various
manufacturers.
(7) Please remove the plastic card from the micro SD Card Slot before using the video
player.
(8) Software Support only for Windows 2000, Windows XP, Windows Vista, Windows7.
Non sottoporre l’apparecchio a forti scosse.Non utilizzare l’apparecchio in ambienti molto freddi, caldi, umidi o polverosi. Non
esporlo all’azione diretta dei raggi solari.
Eseguire regolarmente un backup per evitare la perdita di dati.
Non utilizzare l’apparecchio in presenza di forti campi magnetici.Proteggere l’apparecchio dal bagnato. Se l’umidità dovesse penetrare
nell’apparecchio, spegnerlo immediatamente. Poi ripulire e asciugare l'apparecchio.
Non utilizzare soluzioni chimiche, per ripulire l’apparecchio. Utilizzare a questo
scopo un panno asciutto.
Decliniamo qualsiasi responsabilità per danni o per la perdita di dati causati da
malfunzionamento, manovre errate, riparazioni eseguite di propria iniziativa o
sostituzione degli accumulatori.
Non smontare l’apparecchio e non cercare di ripararlo autonomamente. Queste
operazioni fanno decadere la validità della garanzia.
L'uso di auricolari o cuffie a volume troppo alto può comportare danni permanenti
all'udito.
3. Funzioni
Lettore MP3&WMA
AVI Video Player
Visualizzatore JPEG / BMP
Lettore di schede di memoria
Navigazione per cartelle
Periferica
Gioco
Batteria LiPo ricaricabile
Impostazioni personalizzate
4. Contenuto della confezione
Verificare il contenuto della confezione
Intenso Video Scooter
Cuffie stereo
Software di conversione (formato AVI)
Cavo USB
Istruzioni d’uso + Tagliando di garanzia
Pagina 2 di 12 IT
Page 28
5. Prima dell’utilizzo
Collegamento con il PC
Per il funzionamento con il sistema operativo Windows 98/SE è necessario installare un
driver prima di collegare il lettore con il PC (I link sono disponibili al sito Internet
www.intenso.de). Per i sistemi operativi WIN 2000/XP/ME/Vista/Windows7 non è
necessario installare il driver.
Procedere nel seguente modo:
(1) Prima dell’utilizzo rimuovere la scheda di plastica dal vano per micro SD.
(2) Collegare il lettore con la porta USB del PC.
(3) Si apre la finestra “Intenso” Ora è possibile salvare i dati dal disco fisso alla
periferica.
Selezionare la funzione “Rimozione sicura dell’hardware”
Per Windows 2000/XP/ME/Vista/Windows7:
Fare clic con il tasto destro del mouse sulla barra degli strumenti, a destra, sul simbolo
“Rimozione sicura dell’hardware” Selezionare la voce del menu “Rimozione sicura della
periferica di archiviazione di massa” con il tasto sinistro del mouse. Assicurarsi che la
trasmissione dei dati sia terminata completamente.
Rimuovere quindi l’apparecchio.
Per Windows 98/SE:
Selezionare l’apparecchio in “Gestione periferiche“ con il tasto sinistro del mouse. Fare clic
sulla voce del menu “Rimozione“. Assicurarsi che la trasmissione dei dati sia terminata
completamente.
Scollegare ora l'apparecchio dal PC.
Caricamento della batteria
L’apparecchio dispone di una batteria LiPo ricaricabile. La batteria si ricarica tramite
collegamento USB al computer.
Per il primo utilizzo dell’apparecchio accertarsi che la batteria sia caricata completamente.
Questa operazione richiede solitamente 3 ore.
Per ricaricare la batteria collegare l’apparecchio al PC mediante il cavo USB. L’operazione
di caricamento si avvia automaticamente.
Se si desidera consultare lo stato dell’operazione di caricamento scollegare l’apparecchio
dal PC. Sul display, a destra in alto, compare un simbolo che indica una batteria. Quando
la batteria è caricata completamente questo simbolo si illumina di verde.
Nota: La batteria agli ioni di litio necessita di un utilizzo regolare per assicurare prestazioni
ottimali. In caso contrario, caricare la batteria almeno una volta al mese.
Pagina 3 di 12 IT
Page 29
Utilizzo di una scheda micro SD:
L’apparecchio è dotato di vano per micro schede SD
Utilizzo di una micro scheda SD
(1) Inserire la micro scheda SD nel vano schede
(2) Tenere premuto il pulsante menu per richiamare il menu principale.
(3) Selezionare "Panoramica cartelle" e premere il pulsante menu per passare alla
"Panoramica cartelle”
(4) Nella “Panoramica cartelle” ci sono 2 directory:
"Memoria interna" e "Micro scheda SD".
Per riprodurre file audio / video dalla micro scheda SD, selezionare la directory "
Micro scheda SD ".
Comandi
A. DISPLAY LCD
B. Play/ Pause: Accensione / spegnimento del software. Funzione pausa
C. Enter / Escape: Azionare il tasto del menu per passare al menu principale.
Premere una volta per confermare la selezione oppure per richiamare la
navigazione delle cartelle.
D. Indietro: titolo precedente. Spostamento verso l’alto.
E. Avanti: titolo successivo. spostamento verso il basso.
F. VOL-: riduzione del volume.
G. VOL+: aumento del volume.
H. Presa cuffie
I. Power Switch: accensione / spegnimento dell’apparecchio.
J. Porta USB: collegamento con il computer.
K. Vano schede micro SD
Pagina 4 di 12 IT
Page 30
Accensione e spegnimento
Accendere
(1) Spostare il pulsante ON/OFF verso destra, su ON.
(2) Premere il tasto PLAY/PAUSE e tenerlo premuto fino all'attivazione del display.
Spegnere
(1) Premere il tasto PLAY/PAUSE e tenerlo premuto fino alla disattivazione del display.
(2) Spostare il pulsante ON/OFF verso sinistra, su OFF.
Osservazione: questo lettore dispone di una funzione di risparmio energetico.
L’apparecchio si spegne automaticamente se non viene utilizzato per più di tre minuti.
6. Comandi
Play/ Pause
Azionare il tasto "B“ (Play/Pause) per la riproduzione di file o la pausa.
Volume della riproduzione musicale/video
Premere il tasto “F“ (VOL-) oppure ”G“ (VOL+) per regolare il volume.
Selezione della traccia successiva (titolo successivo)
Premere una volta il tasto “E“ (Avanti).
Selezione della traccia precedente (titolo precedente)
Premere una volta il tasto “D“ (Indietro).
Avanzamento
Tenere premuto il tasto “E“ (Avanti)
Riavvolgimento
Tenere premuto il tasto “D“ (Indietro)
Blocco/sblocco tasti
Premere i tasti “C“ (Enter/Escape) e “G“ (VOL-) contemporaneamente.
Ripetizione A-B di un titolo musicale
Per riprodurre in continuazione un determinato brano di una traccia musicale.
(1) Durante la riproduzione tenere premuto il tasto “F“ (VOL+)per stabilire l’inizio del
brano da ripetere.
(2) Premere il tasto “F“ (VOL+) di nuovo per stabilire la fine del brano da ripetere.
(3) Attivando il tasto “F“ (VOL+) si conclude la ripetizione continua.
Pagina 5 di 12 IT
Page 31
7. Riproduzione di file musicali
Modalità musicale
Tenere premuto il tasto Enter/Escape per passare al menu principale.
Selezionare “Musica” e confermare con il tasto Enter/Escape.
Avviare la riproduzione con il tasto Enter/Escape.
Panoramica cartelle
(1) Premere una volta il tasto Enter/Escape in modalità musicale.
(2) Con il tasto Avanti/Indietro è possibile selezionare la cartella o il titolo musicale
desiderato. Confermare la selezione con il tasto Enter/Escape.
8. Video
(1) Tenere premuto il tasto Enter/Escape per passare al menu principale.
(2) Selezionare la modalità video con il tasto Avanti/Indietro.
(3) Con il tasto Enter/Escape è possibile avviare la visualizzazione di un filmato. Il tasto
Avanti/Indietro consente la selezione di un file video dalla directory.
(4) Con il tasto Enter/Escape è possibile richiamare durante la riproduzione la
panoramica cartelle.
Nota: il lettore può riprodurre solo file in formato AVI. Per l’utilizzo dei formati RM, RMVB,
MPG, MPEG, WMV, DAT, VOB è necessario il software di conversione in dotazione
eseguibile in Windows.
9. Immagini
Visualizzazione delle immagini
(1) Tenere premuto il tasto Enter/Escape per passare al menu principale.
(2) Selezionare la modalità foto con il tasto Avanti/Indietro.
(3) Una volta selezionata una foto è possibile passare alla foto successiva con il tasto
Avanti/Indietro. Con il tasto Play/ Pause è possibile avviare la visualizzazione di un
diashow. Con il tasto Enter/Escape è possibile richiamare durante la riproduzione la
panoramica cartelle.
Nota: l’apparecchio è in grado di riprodurre unicamente file in formato JPG / BMP.
Pagina 6 di 12 IT
Page 32
10. Testo
Lettura di file .txt
(1) Tenere premuto il tasto Enter/Escape per passare al menu principale.
(2) Selezionare “Testo” e premere il tasto Enter/Escape per confermare.
(3) Selezionare con il tasto Avanti/Indietro un file di testo e confermare con il tasto
Enter/Escape.
(4) Premere il tasto Avanti/Indietro per passare alla parte superiore o inferiore del testo
non indicata sul display. Oppure selezionare lo scorrimento automatico con il tasto
Play/Pause. (In Impostazioni è possibile selezionare l’intervallo temporale tra 2 e 10
secondi: “Impostazioni -> Diashow -> Testo”).
(5) Durante la lettura è possibile contrassegnare un punto del testo con un segnalibro.
Questa procedura viene descritta al punto successivo.
Nota: esiste la possibilità di memorizzare 3 segnalibri.
Creare un segnalibro
(1) Passare al punto che si desidera contrassegnare.
(2) Premere una volta il tasto VOL+. Sul display compare “Save Bookmark“.
(3) Con il tasto Avanti/Indietro selezionare un numero di segnalibro. Confermare la
selezione con il tasto Enter/Escape. Il segnalibro è memorizzato. Dalla prima riga si
apre la pagina attuale.
(4) Per caricare la pagina marcata premere una volta il tasto VOL- richiamando il
segnalibro. Selezionare il segnalibro e confermare con il tasto Enter/Escape. Il
programma vi conduce alla pagina desiderata.
Nota: se il programma non apre il file di testo, probabilmente il formato non è supportato.
Selezionare il formato testo.
11. Ricerca di tutti i file
Per eseguire una ricerca di tutti i file salvati, procedere nel modo seguente:
(1) Tenere premuto il tasto Enter/Escape per passare al menu principale.
(2) Selezionare la voce del menu "Panoramica cartelle". Ora è possibile selezionare
“Memoria interna” oppure “Scheda micro SD” Confermare la selezione con il tasto
menu.
(3) Selezionare il file desiderato con il tasto Avanti/Indietro e confermare la selezione
con il tasto Enter/Escape.
12. Cancellazione di un file
(1) Selezionare il file che si desidera cancellare nella panoramica cartelle.
(2) Premere il tasto VOL -. Compare una finestra di dialogo
(3) Selezionare con il tasto Avanti/Indietro un file di testo e confermare con il tasto
Enter/Escape.
Pagina 7 di 12 IT
Page 33
13. Gioco
L’apparecchio offre il gioco Tetris World. Per avviare questo gioco selezionare nel menu
principale l’opzione “Gioco” e confermare con il tasto Enter/Escape.
Avvio gioco
Premere il tasto “PLAY/PAUSE”
Spostamento del blocco a destra o sinistra
Premere il tasto Indietro oppure il tasto Avanti
Rotazione del blocco
Premere il tasto Enter/Escape
Posizionamento del blocco
Premere il tasto VOL
Uscita dal gioco
Tenere premuto il tasto Enter/Escape
14. Impostazioni di sistema
Adeguamento delle impostazioni:
(1) Selezionare nel menu principale la voce “Impostazioni“.
(2) Con il tasto Avanti/Indietro selezionare la voce del menu desiderata e confermarla
con il tasto Enter/Escape per modificare le impostazioni. Ritornare indietro con il
tasto Play/Pause.
Musica
Ripetizione
(1) Solo una volta: riproduce la traccia attuale e termina poi la riproduzione.
(2) Ripetizione titolo: ripetizione della traccia attuale
(3) Cartella una volta: ripete i titoli nella cartella selezionata e termina poi la
riproduzione.
(4) Ripetizione cartella: ripete tutti i titoli della cartella attuale.
(5) Tutti i titoli una volta:l’apparecchio riproduce tutti i titoli memorizzati e termina la
riproduzione con l’ultimo titolo.
(6) Ripetizione di tutti i titoli: ripetizione di tutti i titoli memorizzati.
(7) Funzione Intro: riproduce i primi 10 secondi di ogni file audio.
Modalità di riproduzione
(1) Riproduzione normale: riproduce i file audio in sequenza.
(2) Riproduzione casuale: riproduzione casuale dei titoli.
Selezionare l’equalizzatore
Normale, 3D, Rock, Pop, Classic, Bass, Jazz, Equalizzatore definito dall’utente
Equalizzatore definito dall’utente
(1) Premere il tasto Avanti/Indietro per attivare la colonna EQ.
(2) Premere i tasti VOL+ / VOL- per impostare i valori.
Pagina 8 di 12 IT
Page 34
(3) Premere nuovamente il tasto Avanti finché il cursore si trova sul pulsante “SÌ” e
confermare con il tasto Enter/Escape.
(4) Selezionare nel menu EQ l’opzione “Equalizzatore definito dall’utente” per utilizzare
le impostazioni.
Diashow Immagine e Testo
Testo
Selezionare l’intervallo temporale per passare dalla pagina attuale alla pagina seguente.
Immagini
Selezionare l’intervallo temporale tra l’immagine attuale e l’immagine successiva.
Impostazioni display
Retroilluminazione
5 secondi
10 secondi
15 secondi
20 secondi
30 secondi
Sempre on
Luminosità
(Stabilisce la luminosità del display)
Modalità di retroilluminazione
Normale
Modalità di risparmio energetico (disattiva la retroilluminazione del display in caso di
mancato utilizzo)
Sistema
Info: informazioni sul prodotto
Firmware Update: aggiornamento del firmware
Impostazioni di fabbrica: Carica le impostazioni di fabbrica
Questa funzione consente di selezionare diverse lingue.
Pagina 9 di 12 IT
Page 35
15. Eliminazione degli errori
Problema – Possibili cause – Soluzione del problema
Sul display non compare alcun dato
(1) La batteria è scarica.
Caricare la batteria.
(2) I tasti sono bloccati.
Sbloccare i tasti come descritto al capitolo “6.Comandi”.
L’apparecchio non reagisce se si preme il tasto Play.
(1) I tasti sono bloccati.
Sbloccare i tasti come descritto al capitolo “6.Comandi”.
L’apparecchio non riproduce alcun suono.
(1) Il volume è troppo basso.
Alzare il volume nel menu volume.
(2) File audio difettoso.
Trasferire nuovamente il file.
Non è possibile collegarsi al PC.
(1) Il driver non è stato installato correttamente
Installare di nuovo il driver.
(2) Aggiornare la scheda principale
(consultare le istruzioni del produttore)
La visualizzazione dell’ora si modifica costantemente.
(1) Il bit rate del file MP3 varia durante la trasmissione.
Utilizzare un bit rate unico per la compressione.
Il PC segnala un errore durante il collegamento all’apparecchio
(1) Il lettore è stato scollegato dal PC durante la trasmissione di dati.
Non scollegare mai il lettore durante la trasmissione di dati.
La memoria indicata dal lettore non coincide con la memoria reale.
(1) Una parte della memoria viene utilizzata dal software per il display.
Non è possibile riprodurre correttamente i dati MP3.
(1) I dati MP3 sono stati compressi in un formato errato, ad esempio MPEG 1
oppure 2.
Cancellare i formati non supportati.
Non è possibile riprodurre dati video.
(1) Il formato non è supportato.
Il formato video deve essere AVI. In caso contrario eseguire la conversione.
Attenzione alla dimensione del formato: 128x160 pixel
(2) Il file video è difettoso.
Trasferire nuovamente il file video.
Pagina 10 di 12 IT
Page 36
Non è possibile trasferire le foto.
(1) Il formato non è supportato.
Convertire la foto in formato JPG.
(2) L’immagine ha una risoluzione maggiore di 3520x2816 pixel
L’apparecchio supporta una risoluzione massima di 3520x 2816 pixel.
Assicurarsi che questa risoluzione non venga superata.
Non è possibile leggere il file di testo.
(1) Il formato non è supportato.
Utilizzare il formato .txt.
16. Dati tecnici
Formati scheda supportati
microSD fino a 2GB & microSDHC 4 | 8 GB
Tipo batteria
Batteria LiPo ricaricabile
Autonomia della batteria
Max. 10 ore
LCD
Schermo TFT 1,8 pollici
Cuffie
5mW+5mW
Formato video
AVI (XviD) 128x160
Formati audio
MP3, WMA
Formato foto
JPEG / BMP
Risoluzione immagini
7000X7000 Pixel (max.)
Bit Rate
MP3: 8-320kbps;
WMA: 8-320kbps;
SNR
>90dB
Porta USB
USB2.0
Pagina 11 di 12 IT
Page 37
Temperatura operativa:
(INTENSO)
®
49377 Vechta
Germany
www.intenso.de
da 0 Celsius a +50 Celsius
Temperatura di conservazione
da -20 Celsius a +65 Celsius
Umidità operativa relativa
dal 20% al 90% (40 Celsius)
Umidità relativa di conservazione
dal 20% al 93% (40 Celsius)
17. Attenzione
(1) Plug & Play è possibile solo con Windows 2000/XP/Vista/Windows7.
Per Windows 98/SE è necessario installare il driver.
(2) Sbloccare i tasti per utilizzare l’apparecchio.
(3) Sostituire la batteria quando compare l’avviso sul display.
(4) Seguire le istruzioni per scollegare il lettore dal PC per evitare la perdita di dati.
(5) In caso di file di grandi dimensioni il caricamento richiede più tempo.
(6) Non è possibile garantire la compatibilità del lettore con tutte le schede micro SD.
(7) Prima dell’utilizzo rimuovere la scheda di plastica dal vano per micro SD.
(8) Compatibile con Windows 2000, Windows XP, Windows Vista, Windows7.
Pagina 12 di 12 IT
Page 38
1. Aperçu du contenu
1. Aperçu du contenu ................................................................................................ 1
17. Veuillez noter que : ............................................................................................. 12
Page 1 sur 12 FR
Page 39
2. Indications
Veuillez éviter un choc brutal de l'appareil.
N’utilisez pas cet appareil dans des endroits extrêmement froids, chauds ou
poussiéreux. Abstenez-vous également de l’exposer directement au soleil.
Effectuez des sauvegardes fréquentes, afin d'éviter une éventuelle perte de
données.
Evitez une utilisation à proximité de champs magnétiques intensifs.
Protégez l'appareil contre l'humidité. Veuillez immédiatement éteindre l'appareil en
cas d'introduction d'humidité. Nettoyez et séchez ensuite l'appareil.
Ne veuillez pas utiliser de produits chimiques pour nettoyer l'appareil. Utilisez
uniquement un tissu sec.
Nous ne sommes pas responsables en cas de dommages ou de pertes de
données, suite à une erreur de fonctionnement, une mauvaise manipulation, une
réparation individuelle de l'appareil ou un remplacement de l'accu.
Ne veuillez pas démonter l'appareil en pièces et n'essayez pas de le réparer tout
seul, car la garantie ne sera plus valable dans ce cas.
L’utilisation d'écouteurs ou de casque d'écoute à un volume élevé est susceptible
d’entraîner une incapacité auditive permanente.
3. Fonctions
Lecteur MP3&WMA
Lecteur vidéo AVI
Lecture d'images JPEG / BMP
Lecteur carte de mémoire
Fichier navigation
Support amovible
Jeu
Batterie rechargeable Li-polymère
Réglage personnalisé
4. Contenu du paquet
Au déballage, assurez-vous que l’emballage contient bien l’intégralité des éléments
listés
Intenso Video Scooter
Ecouteurs stéréo
Logiciel de conversion (format AVI)
Câble USB
Mode d'emploi + Carte de garantie
Page 2 sur 12 FR
Page 40
5. Avant l'utilisation
Connexion avec l'ordinateur
Pour les systèmes d'exploitation Windows 98/SE, veuillez installer un pilote avant de
connecter le lecteur à l'ordinateur (Vous trouverez des possibilités de téléchargement sous
www.intenso.de). Pour les systèmes d'exploitation WIN 2000/XP/ME/Vista/ Windows7,
vous ne nécessitez pas une installation du pilote.
Veuillez procéder comme suit :
(1) Veuillez retirer la carte en plastique de l'emplacement pour carte micro SD avant
l'utilisation.
(2) Connectez le lecteur au branchement USB de l'ordinateur.
(3) La fenêtre “Intenso” s'ouvre. Maintenant vous pouvez enregistrer les données de
votre disque dur sur le support amovible.
Déconnexion sécurisée de l'ordinateur
Pour Windows 2000/XP/ME/Vista/Windows7:
Cliquez (droite) avec la souris en bas à droite de la barre des tâches, sur le symbole
„retirer périphérique en toute sécurité“. Dans le menu qui suit, veuillez choisir le point
„retirer appareil périphérique amovible USB“ en cliquant dessus avec la souris (gauche).
Veuillez vous assurer que la transmission des données soit entièrement terminée.
Vous pouvez maintenant retirer l'appareil.
Pour Windows 98/SE :
Choisissez l'appareil dans l'„assistant des périphériques“ en cliquant (gauche) avec la
souris. Cliquez maintenant sur le point de menu „retirer“. Veuillez aussi ici vous assurer
que la transmission des données soit entièrement terminée.
L'appareil peut maintenant être retiré de l'ordinateur.
Chargement de la batterie :
L'appareil dispose d'une batterie rechargeable Li-polymère. La batterie est rechargée par
le branchement USB de votre ordinateur.
Lors de la première utilisation de l'appareil, veillez à charger entièrement la batterie. Cette
procédure dure en général 3 heures.
Pour recharger la batterie, connectez l'appareil à l'ordinateur à l'aide du câble USB. La
procédure de chargement débute automatiquement.
Si vous souhaitez connaître le statut actuel du chargement, veuillez débrancher l'appareil
de l'ordinateur. Vous pouvez alors voir un symbole de batterie en haut à droite de l'écran.
Lorsque le symbole s'affiche en vert, la batterie est entièrement chargée.
Indication : Pour une capacité de fonctionnement optimale, la batterie doit être
régulièrement utilisée. Si cela ne devait pas être le cas, veuillez recharger la batterie au
moins une fois par mois.
Page 3 sur 12 FR
Page 41
Utilisation d'une carte micro SD :
L’appareil est équipé d’un emplacement destiné aux cartes mémoires de type microSD.
Utilisation d’une carte mémoire de type microSD
(1) Placez la carte micro SD dans l'emplacement pour cartes
(2) Appuyez et maintenez votre appui sur le bouton de menu, pour afficher le menu
principal.
(3) Sélectionnez le "aperçu de dossiers" et appuyez sur le bouton de menu, afin
d'arriver dans le "fichier menu"
(4) Dans l'aperçu de dossiers, vous trouverez 2 répertoires :
"Mémoire interne" et "carte micro SD".
Pour lire des fichiers audio / vidéo de la carte micro SD, veuillez choisir le répertoire
"carte micro SD".
Eléments de commande
A. Écran LCD
B. Play/Pause : Allumer / éteindre le logiciel. Fonction de pause.
C. Enter/Escape : Appuyez pendant plus longtemps pour arriver au menu principal.
Appuyez brièvement pour confirmer le choix ou pour ouvrir le dossier navigation.
D. Retour : Titre précédent. Mouvement vers le haut.
E. Avancer : Titre suivant. Mouvement vers le bas.
F. VOL- : Diminuer le volume.
G. VOL+ : Augmenter le volume.
H. Entrée écouteurs
I. Power Switch : Allumer / éteindre l'appareil
J. Port USB : Branchement avec l'ordinateur
K. Emplacement pour carte micro SD
Page 4 sur 12 FR
Page 42
Allumage/Extinction
Allumage de l’appareil :
(1) Pour mettre l’appareil sous tension, poussez l’interrupteur MARCHE/ARRÊT
(ON/OFF) vers la droite sur ON.
(2) Maintenez enfoncée la touche PLAY/PAUSE jusqu’à l’allumage de l’écran.
Extinction de l’appareil :
(1) Maintenez enfoncée la touche PLAY/PAUSE jusqu’à l’extinction de l’écran.
(2) Poussez l’interrupteur MARCHE/ARRÊT (ON/OFF) vers la gauche sur OFF.
Note : Ce lecteur est équipé d’une fonction d’économie d’énergie commandant l’extinction
automatique de l’appareil après environ 3 minutes d’inactivité.
6. Commande
Play/Pause
Appuyez sur la touche „B“ (Play/Pause) pour la lecture ou la pause.
Volume pour la lecture de musique/vidéos
Appuyez sur la touche „F“ (VOL-) ou „G“ (VOL+) pour régler le volume.
Choix du titre suivant (titre suivant)
Brève confirmation de la touche „E“ (avancer).
Choix du titre précédent (titre précédent)
Brève confirmation de la touche „D“ (retour).
Avancer
Rester appuyé sur la touche „E“ (avancer)
Retour
Rester appuyé sur la touche „D“ (retour)
Verrouiller / déverrouiller
Appuyez simultanément sur les touches „C“ (Enter/Escape) et „G“ (VOL-).
A-B Repeat lors de la lecture de musique
Afin de rejouer un certain passage d'un titre en boucle.
(1) Appuyez durant la lecture sur la touche „F“ (VOL+) durant la lecture et restez
appuyé sur la touche pour définir le point de départ de la boucle.
(2) Appuyez de nouveau sur la touche „F“ (VOL+) pour définir le point final de la
boucle.
(3) En confirmant avec la touche „„F“ (VOL+) la boucle est terminée.
Page 5 sur 12 FR
Page 43
7. Lecture de musique
Mode musique
Appuyez et maintenez votre appui sur le bouton de Enter/Escape, pour afficher le menu
principal.
Choisissez “musique” et confirmez avec la touche Enter/Escape.
Démarrez la lecture avec la touche Enter/Escape.
Aperçu de dossiers
(1) Appuyez brièvement sur la touche Enter/Escape dans le mode de musique.
(2) A l'aide de la touche avancer/reculer, vous pouvez choisir le fichier ou le titre de
musique souhaité. Avec la touche Enter/Escape, vous confirmez votre choix.
8. Vidéo
(1) Appuyez et maintenez votre appui sur le bouton de Enter/Escape, pour afficher le
menu principal.
(2) Choisissez la vidéo à l'aide de la touche avancer/retour.
(3) Vous pouvez démarrer un film vidéo en appuyant sur la touche Enter/Escape. La
touche avancer/retour permet le choix du fichier vidéo souhaité dans votre
répertoire.
(4) Avec la touche Enter/Escape, vous pouvez ouvrir l'aperçu du dossier navigation
durant la lecture.
Indication : Ce lecteur peut uniquement lire des formats AVI. Pour l'utilisation des formats
RM, RMVB, MPG, MPEG, WMV, DAT, VOB, vous nécessitez le logiciel de conversion
inclus, compatible avec Windows.
9. Images
Affichage d'images
(1) Appuyez et maintenez votre appui sur le bouton de Enter/Escape, pour afficher le
menu principal.
(2) Choisissez la photo à l'aide de la touche avancer/retour.
(3) Lorsque vous avez choisi une photo, vous arrivez à l'image suivante à l'aide de la
touche avancer/retour. Vous pouvez démarrer et arrêter un diaporama en appuyant
sur la touche Play/ Pause. Avec la touche Enter/Escape, vous pouvez ouvrir
l'aperçu du dossier navigation durant le diaporama.
Indication : L'appareil peut uniquement lire des images en format JPG / BMP.
Page 6 sur 12 FR
Page 44
10. Texte
Lecture des fichiers txt
(1) Appuyez et maintenez votre appui sur le bouton de Enter/Escape, pour afficher le
menu principal.
(2) Choisissez “Texte” et appuyez sur la touche Enter/Escape pour confirmer.
(3) Choisissez un fichier de texte à l'aide de la touche avancer/retour et confirmez avec
la touche Enter/Escape.
(4) Appuyez sur la touche avancer/retour, pour arriver soit à la partie supérieure ou à la
partie inférieure du texte, qui n'est pas visible sur l'écran. Ou choisissez le
défilement automatique avec la touche Play/ Pause. (Vous pouvez définir l'intervalle
temporaire de 2 à 10 secondes sous réglages : “Réglages -> diaporama -> Texte”).
(5) Pendant que vous continuez de lire, vous pouvez marquer un endroit avec le
bookmark, pour y revenir plus tard. Cette procédure est décrite plus en détail dans
l'étape suivante.
Indication : Vous pouvez enregistrer jusqu'à 3 marque-pages.
Placer un marque-page
(1) Allez à l'endroit que vous souhaitez marquer.
(2) Appuyez brièvement sur la touche VOL+. Le symbole „Save Bookmark“ apparaît sur
l'écran.
(3) Grâce à la touche avancer / retour, vous choisissez un numéro de bookmark.
Confirmez votre choix avec la touche de Enter/Escape. Le marque-page est
enregistré. Il démarre de la première ligne de la page actuelle.
(4) Pour charger la page marquée, veuillez appuyer brièvement sur la touche VOL-,
afin d'afficher les marque-pages enregistrés. Choisissez un marque-page et
confirmez-le avec la touche Enter/Escape. Vous allez maintenant être mené jusqu'à
cette page.
Indication : Si votre fichier de texte ne démarre pas, le format de texte choisi n'est alors
pas compatible. Veuillez choisir un autre format de texte.
11. Rechercher parmi tous les fichiers
Pour rechercher parmi tous les fichiers du lecteur, veuillez procéder comme suit :
(1) Appuyez et maintenez votre appui sur le bouton de Enter/Escape, pour afficher le
menu principal.
(2) Sélectionnez le point de menu „Aperçu de dossiers“. Vous pouvez maintenant
choisir entre “mémoire interne” et “carte micro SD”. Confirmez avec la touche de
menu.
(3) Avec la touche avancer/retour, vous pouvez choisir le fichier souhaité et confirmez
le choix à l'aide de la touche Enter/Escape.
12. Effacer un fichier
(1) Choisissez le fichier que vous souhaitez supprimer dans l'aperçu de dossiers.
(2) Appuyez brièvement sur la touche VOL-. Une boîte de dialogue s'ouvre.
Page 7 sur 12 FR
Page 45
(3) Choisissez “Oui” à l'aide de la touche avancer/retour et confirmez avec la touche
Enter/Escape.
13. Jeu
Cet appareil dispose du jeu Tetris World. Pour démarrer ce jeu, sélectionnez l'option “jeu”
dans le menu principal et confirmez avec la touche Enter/Escape.
Démarrer le jeu
Appuyez sur la touche „PLAY/PAUSE“
Déplacer le bloc vers la droite ou la gauche
Appuyez sur la touche retour ou avancer
Tourner le bloc
Appuyez sur la touche Enter/Escape
Descendre le bloc
Appuyez sur la touche VOL
Quitter le jeu
Restez appuyé sur la touche Enter/Escape
14. Réglages de système
Adapter les réglages :
(1) Veuillez choisir le point de menu “réglages”.
(2) A l'aide de la touche avancer/retour, vous choisissez le point de menu souhaité,
pour ensuite le confirmer avec la touche Enter/Escape, afin de modifier les
réglages. Vous pouvez revenir en arrière grâce à la touche „Play/Pause“.
Musique
Répétition
(1) Titre simple : Joue le titre actuel et arrête ensuite la lecture.
(2) Répéter titre : Répète le titre actuel.
(3) Dossier simple : Joue une fois les titres d'un dossier choisi et arrête ensuite la
lecture
(4) Répéter dossier : Répète tous les titres du dossier actuel.
(5) Tous les titres une fois : Joue tous les titres enregistrés et termine la lecture avec
le dernier titre.
(6) Répéter tous les titres : Répète tous les titres enregistrés.
(7) Fonction intro : Joue les 10 premières secondes de chaque fichier audio.
Mode de lecture
(1) Lecture normale : Joue les fichiers audio dans l'ordre
(2) Lecture aléatoire : Lecture aléatoire des titres.
Choisir Equalizer
Normal, 3D, rock, pop, classique, bass, jazz, equalizer personnalisé
Page 8 sur 12 FR
Page 46
Equalizer personnalisé
(1) Appuyez sur la touche avancer ou retour, pour choisir la bande EQ.
(2) Veuillez utiliser les touches VOL+ / VOL-, pour régler les valeurs.
(3) Répéter l'appui sur la touche avancer, jusqu'à placer le curseur sur le bouton “OUI”
et confirmez avec la touche Enter/Escape.
(4) Choisissez maintenant dans le menu EQ l'option “Equalizer personnalisé”, afin
d'utiliser les réglages.
Diaporama d'images & textes
Texte
Choisissez un intervalle temporaire pour tourner la page actuelle vers la page suivante.
Images
Choisissez l'intervalle temporaire entre l'image actuelle et l'image suivante.
Problème – causes éventuelles – solution du problème
Votre écran n'affiche pas d'image.
(1) La batterie est vide.
Rechargez la batterie.
(2) Les touches sont bloquées.
Déverrouillez le verrouillage des touches comme indiqué sous „6. Commande“.
L'appareil ne réagit pas lors de la commande de la touche Play.
(1) Les touches sont bloquées.
Déverrouillez le verrouillage des touches comme indiqué sous „6. Commande“.
La lecture n'émet pas de son.
(1) Le volume est trop faible
Veuillez augmenter le volume dans le menu du volume
(2) Fichier audio endommagé
Veuillez de nouveau transmettre le fichier
Aucune connexion n'a pu être établie avec l'ordinateur.
(1) Le pilote n'a pas été correctement installé
Veuillez réinstaller le pilote.
(2) Veuillez effectuer une actualisation de la carte mère
(Veuillez respecter les indications du fabricant)
L'affichage du temps change en permanence.
(1) La valeur bit du fichier MP3 change durant la lecture.
Veuillez utiliser une valeur bit unitaire lors de la compression.
L'ordinateur indique une erreur lors de la connexion avec l'appareil
(1) Le lecteur a été séparé de l'ordinateur durant la transmission des données.
Ne veuillez jamais débrancher l'appareil durant la transmission des données.
La capacité de mémoire indiquée de l'appareil ne correspond pas à la
mémoire réelle.
(1) Une partie de la mémoire est utilisée pour le logiciel, le formatage et les
caractéristiques de l'écran.
Les données MP3 ne sont pas lues correctement.
(1) Les données MP3 ont été comprimées dans un mauvais format, par exemple
en MPEG 1 ou 2.
Effacez les formats de fichiers, qui ne sont pas compatibles.
Page 10 sur 12 FR
Page 48
Les fichiers vidéo ne peuvent pas être lus.
(1) Ce format de fichier n'est pas compatible.
Le format vidéo doit être AVI. Si ce n'est pas le cas, veuillez le convertir. Veillez
à la taille du format de 128x160 Pixel
(2) Le fichier vidéo est endommagé.
Transmettez de nouveau le fichier vidéo
Les photos ne sont pas affichées.
(1) Ce format de fichier n'est pas compatible !
Veuillez convertir la photo en format JPG.
(2) L'image dispose d'une résolution supérieure à 3520x2816 pixel
L'appareil supporte une résolution maximale de 3520 x 2816 pixel. Assurezvous de ne pas dépasser cette résolution.
Impossible de lire le fichier de texte.
(1) Ce format de fichier n'est pas compatible.
Veuillez utiliser le format txt
16. Données techniques
Formats de cartes compatibles
microSD jusqu'à 2GO & microSDHC 4 | 8 GO
Type de batterie
Batterie rechargeable Li-polymère
Durée de batterie
Max. 10 heures
LCD
Ecran TFT 1,8“ pouces
Ecouteurs
5mW+5mW
Format vidéo
AVI (XviD) 128x160
Formats audio
MP3, WMA
Format photo
JPEG / BMP
Résolution de l'image
7000X7000 pixel (max.)
Bit
MP3 : 8-320kbps ;
WMA : 8-320kbps
Page 11 sur 12 FR
Page 49
SNR
(INTENSO)
®
49377 Vechta
Germany
www.intenso.de
>90dB
Port USB
USB2.0
Etat de marche entre
0 celsius ~ +50 celsius
Température de stockage entre
20 celsius ~ +65 celsius
A utiliser à une humidité de l'air relative de
20% ~ 90% (40 celsius)
A entreposer à une humidité de l'air relative de
20% ~ 93% (40 celsius)
17. Veuillez noter que :
(1) Plug & Play est uniquement possible sur Windows 2000/XP/Vista/Windows7.
Pour Windows 98/SE, veuillez installer le pilote.
(2) Veuillez déverrouiller le verrouillage des touches pour utiliser l'appareil.
(3) Veuillez recharger la batterie lorsque l'écran l'indique.
(4) Veuillez uniquement déconnecter l'appareil de l'ordinateur selon les indications
correspondantes, afin d'éviter une perte éventuelle des données.
(5) Lorsque le fichier est très grand, le chargement du fichier est plus long.
(6) Nous ne garantissons pas de compatibilité de l'appareil de lecture avec toutes les
cartes micro SD disponibles.
(7) Veuillez retirer la carte en plastique de l'emplacement pour carte micro SD.
(8) Logiciel compatible avec Windows 2000, Windows XP, Windows Vista, Windows7.
Page 12 sur 12 FR
Page 50
1. Resumen del contenido
1. Resumen del contenido ........................................................................................ 1
14. Configuraciones del sistema ................................................................................. 8
15. Resolución de errores ......................................................................................... 10
16. Datos técnicos .................................................................................................... 11
17. Tenga en cuenta lo siguiente .............................................................................. 12
Página 1 de 12 ES
Page 51
2. Indicaciones
Evite que el dispositivo reciba golpes fuertes.
No utilice el aparato en zonas de calor, frío o humedad extremos ni en zonas muy
polvorientas. No lo coloque bajo la luz directa del sol.
Realice copias de seguridad a menudo para evitar una posible pérdida de datos.
Evite utilizarlo en campos magnéticos fuertes.
Proteja el dispositivo de la humedad. Si entra humedad en el dispositivo, apáguelo
inmediatamente. Posteriormente limpie y séquelo.
No use disolventes químicos para limpiarlo. Use solamente un pañuelo seco.
No nos hacemos responsables de los daños o la pérdida de datos en caso de
funcionamiento erróneo, manipulación incorrecta o reparación del dispositivo por el
propio usuario o cambio de la batería.
No desarme el dispositivo ni intente repararlo por su cuenta. La garantía quedaría
anulada.
Si utiliza auriculares y ajusta el volumen demasiado alto puede dañar
permanentemente su oído.
3. Funciones
MP3&WMA Player
AVI Video Player
Visualizador de imágenes JPEG / BMP
Lector de tarjetas de memoria
Navegador de carpetas
Memoria extraíble
Juego
Baterías de litio-polímero recargables
Ajustes específicos del cliente
4. Contenido del paquete
Compruebe que el contenido del embalaje se encuentre en perfectas condiciones.
Intenso Video Scooter
Auriculares estéreo
Software de conversión (formato AVI)
Cable USB
Instrucciones de uso + Tarjeta de garantía
Página 2 de 12 ES
Page 52
5. Antes del uso
Conexión con el PC
Instale un controlador en el sistema operativo Windows 98/SE antes de conectar el
reproductor con el PC (puede descargarlo en www.intenso.de). Los sistemas operativos
WIN 2000/XP/ME/Vista/Windows7 no requieren la instalación de este controlador.
Proceda como se indica a continuación:
(1) Antes de usar el dispositivo retire la tarjeta de plástico de la ranura de la tarjeta
Micro SD.
(2) Conecte el reproductor en la conexión USB del PC.
(3) Se abre la ventana “Intenso”. Ahora puede guardar los datos de su disco duro a la
memoria.
Desconexión segura del PC
Para Windows 2000/XP/ME/Vista/Windows7:
Pulse con el botón derecho el símbolo "Extraer hardware con seguridad" en la barra de
herramientas situada en la parte inferior derecha. Seleccione "Extraer dispositivo de
almacenamiento masivo USB" con el botón izquierdo. Asegúrese de que la transmisión de
datos haya finalizado completamente.
Ahora puede extraer el dispositivo.
Para Windows 98/SE:
Seleccione el dispositivo en "Administrador de dispositivos" con el botón izquierdo. Ahora
pulse en el punto del menú "Extraer". Asegúrese de que la transmisión de datos haya
finalizado completamente.
Ahora puede desconectar el dispositivo del PC.
Carga de la batería:
El dispositivo dispone de una baterías de litio-polímero incorporada. La batería se carga
mediante la conexión USB de su PC.
La primera vez que utilice el dispositivo asegúrese que la batería esté completamente
cargada. Este proceso dura normalmente 3 horas.
Para cargar la batería, conecte el dispositivo a su PC mediante el cable USB. El proceso
de carga se inicia automáticamente.
Si quiere saber el estado actual del proceso de carga, desconecte el dispositivo del PC.
En la pantalla verá un símbolo de batería en la parte superior derecha. Si este símbolo es
de color verde, la batería está completamente cargada.
Nota: para un rendimiento óptimo, la baterías de litio-polímero debe usarse regularmente.
De no ser así, cargue la batería completamente como mínimo una vez al mes.
Página 3 de 12 ES
Page 53
Uso de Micro SD Card:
El aparato contiene una ranura para las tarjetas micro SD.
Empleo de una tarjeta micro SD
(1) Inserte la tarjeta Micro SD en la ranura para tarjetas
(2) Pulse y mantenga pulsado el botón Menú para acceder al menú principal.
(3) Seleccione "Ordner Übersicht" (Vista general de las carpetas) y pulse el botón
Menú, para acceder a "Ordner Übersicht" (Vista general de las carpetas)
(4) En Ordner Übersicht (Vista general de las carpetas) encontrará 2 índices:
"Interner Speicher" (Memoria interna) y "Micro SD-Karte" (Tarjeta Micro-SD).
Para reproducir archivos de audio o de video de la Micro SD Card, selecciones el
índice " Micro SD-Karte " (Tarjeta Micro SD).
Botones y funciones
A. Pantalla LCD
B. Play/Pause Activar o desactivar el software. Función de pausa.
C. Enter/Escape: Manténgalo pulsado prolongadamente para acceder al menú
principal. Pulse brevemente para confirmar la selección o acceder al navegador de
carpetas.
D. Retroceder: Pista anterior. Mover hacia arriba.
E. Avanzar: Pista siguiente. Mover hacia abajo.
F. VOL-: Bajar el volumen.
G. VOL+: Subir el volumen.
H. Entrada de auricular
I. Power Switch: Activar o desactivar el Player.
J. Puerto USB: Conexión con el ordenador
K. Ranura de Micro SD Card
Página 4 de 12 ES
Page 54
Encender y apagar
Encender
(1) Deslice el botón ON/OFF a la derecha hacia la posición ON.
(2) Pulse la tecla PLAY/PAUSE y manténgala pulsada hasta que se encienda la
pantalla.
Apagar
(1) Pulse la tecla PLAY/PAUSE y manténgala pulsada hasta que se apague la
pantalla.
(2) Deslice el botón ON/OFF a la izquierda hacia la posición OFF.
Observación: este reproductor dispone de un dispositivo de ahorro de energía. El aparato
se apaga automáticamente después de estar 3 minutos inactivo.
6. Uso
Play/Pause
Pulse el botón "B" (Play/Pause) para reproducir o detener.
Volumen en la reproducción de música o video
Pulse el botón "F" (VOL-) o "G" (VOL+) para regular el volumen.
Selección de la pista siguiente
Pulse brevemente el botón "E" (avance).
Selección de la pista anterior
Pulse brevemente el botón "D" (retroceso).
Avanzar
Mantenga pulsado el botón "E" (avance)
Retroceder
Mantenga pulsado el botón "D" (retroceso)
Bloquear/desbloquear los botones
Pulse los botones "C" (Enter/Escape) y "G" (VOL-) simultáneamente
A-B Repeat en la reproducción de música
Esta función le permite reproducir un determinado fragmento de una pista repetidamente.
(1) Durante la reproducción, pulse y mantenga el botón "F" (VOL+), para determinar el
punto inicial de la sección.
(2) Pulse y mantenga pulsado el botón "F" (VOL+) de nuevo para determinar el punto
final del fragmento.
(3) Pulsando el botón "F" (VOL+) terminará la reproducción.
Página 5 de 12 ES
Page 55
7. Reproducción de música
Modo música
Pulse y mantenga pulsada el botón Enter/Escape para acceder al menú principal.
Seleccione “Musik” (Música) y confírmelo con el botón Enter/Escape.
Inicie la reproducción con el botón Enter/Escape.
Vista general de las carpetas
(1) Pulse brevemente el botón Enter/Escape en el modo Música.
(2) Con el botón de Avance/Retroceso puede seleccionar la carpeta o pista deseada.
Con el botón Enter/Escape confirma su selección.
8. Video
(1) Pulse prolongadamente el botón Enter/Escape para acceder al menú principal.
(2) Seleccione con el botón Avance/Retroceso el video.
(3) Con el botón Enter/Escape puede iniciar un video. El botón Avance/Retroceso
facilita la selección del archivo de video deseado en el índice.
(4) Durante la reproducción, con el botón Enter/Escape puede acceder a la vista
general de las carpetas.
Nota: este reproductor sólo puede reproducir formatos AVI. Para usar formatos RM,
RMVB, MPG, MPEG, WMV, DAT, VOB; es necesario usar el software de conversión para
Windows suministrado.
9. Imágenes
Visualización de imágenes
(1) Pulse y mantenga pulsado el botón Enter/Escape para acceder al menú principal.
(2) Seleccione la foto con el botón Avance/Retroceso.
(3) Cuando haya seleccionado una foto, acceda a la siguiente con el botón
Avance/Retroceso. Con el botón Play/ Pause puede iniciar y detener un Diashow.
Durante el Diashow puede acceder a la vista general de las carpetas con el botón
Enter/Escape.
Nota: el dispositivo sólo puede reproducir imágenes con formato JPG / BMP.
10. Texto
Lectura de archivos .txt
(1) Pulse y mantenga pulsado el botón Enter/Escape para acceder al menú principal.
Página 6 de 12 ES
Page 56
(2) Seleccione “Text” (Texto) y pulse el botón Enter/Escape para confirmar.
(3) Seleccione un archivo de texto con el botón Avance/Retroceso y confírmelo con el
botón Enter/Escape.
(4) Presione el botón Avance/ Retroceso para acceder a la parte superior o inferior del
texto que no aparece en la pantalla. O seleccione con el botón Play/ Pause el
avance automático. (Puede seleccionar un intervalo de tiempo de entre 2 y 10
segundos en configuraciones: “Einstellungen (configuraciones) -> Diashow -> Text
(Texto)”).
(5) Mientras lee, puede marcar un punto con el Bookmark para leerlo de nuevo. Este
proceso se describe más detalladamente en el siguiente punto.
Nota: puede guardar hasta 3 puntos de lectura.
Crear un punto de lectura
(1) Sitúese en el punto que quiere marcar.
(2) Pulse brevemente el botón VOL+. Aparece "Save Bookmark" (Guardar marcador)
en la pantalla.
(3) Con el botón Avance/Retroceso seleccione una sección del número de marcador.
Confirme su selección con el botón Enter/Escape. El punto de lectura se ha
guardado. Se iniciará por la primera línea de la página actual.
(4) Para cargar la página marcada, pulse brevemente el botón VOL, para acceder al
punto de lectura guardado. Seleccione un punto de lectura y confírmelo con el
botón Enter/Escape. Ahora accederá a esta página.
Nota: si su archivo de texto no arranca, puede ser que el formato de texto seleccionado
no sea compatible. Seleccione otro formato de texto.
11. Búsqueda entre todos los archivos
Para buscar entre todos los archivos del Player, proceda como se describe a
continuación:
(1) Pulse prolongadamente el botón Enter/Escape para acceder al menú principal.
(2) Seleccione el punto del menú "Ordner Übersicht" (Vista general de las carpetas).
Puede elegir entre "interner Speicher" (Memoria interna) y "Micro SD-Karte" (Tarjeta
Micro-SD). Confirme con el botón Menú.
(3) Seleccione el archivo deseado con el botón Avance/Retroceso y confirme su
selección con el botón Enter/Escape.
12. Eliminar un archivo
(1) Seleccione el archivo que quiere eliminar de la vista general de carpetas.
(2) Pulse brevemente el botón VOL. Aparecerá un cuadro de diálogo.
(3) Seleccione "Ja" (Sí) con el botón Avance/Retroceso y confírmelo con el botón
Enter/Escape.
13. Juego
Este dispositivo dispone del juego Tetris World. Para empezar este juego, seleccione en
el menú principal la opción "Spiel" (Juego) y confírmelo con el botón Enter/Escape.
Página 7 de 12 ES
Page 57
Iniciar el juego
Pulse el botón "PLAY/PAUSE"
Mover el bloque hacia la derecha o hacia la izquierda
Pulse el botón Avance o Retroceso.
Girar el bloque
Pulse el botón Enter/Escape
Colocar el bloque
Pulse el botón VOL
Abandonar el juego
Pulse prolongadamente el botón Enter/Escape
14. Configuraciones del sistema
Ajuste de las configuraciones:
(1) Ahora seleccione el punto "Einstellungen" (Configuraciones) en el menú principal.
(2) Con el botón Avance/Retroceso seleccione el punto del menú deseado y confírmelo
con el botón Enter/Escape para cambiar las configuraciones. Con el botón
"Play/Pause" retrocede.
Música
Repetición
(1) Pista única: reproduce la pista actual y detiene la reproducción.
(2) Repetir pista: repite la pista actual.
(3) Carpeta de pista única: repite una vez la pista de la carpeta seleccionada y
después detiene la reproducción
(4) Carpeta de repetición: repite todas las pistas de la carpeta actual.
(5) Todas las pistas únicas: reproduce todas las pistas guardadas y termina la
reproducción con la última pista.
(6) Repetir todas las pistas: repite todas las pistas guardadas.
(7) Función Intro: reproduce los primeros 10 seg. de los archivos de audio.
Modo de reproducción
(1) Reproducción normal: reproduce los archivos de audio por orden
(2) Reproducción aleatoria: reproduce las pistas aleatoriamente.
Selección del ecualizador
Normal, 3D, rock, pop, clásico, bass, bazz, ecualizador definido por el usuario
Ecualizador definido por el usuario
(1) Pulse el botón Avance o Retroceso para seleccionar la barra de EQ.
(2) Pulse los botones VOL+ / VOL- para ajustar los valores.
(3) Vaya pulsando el botón avance hasta que el cursor esté en el botón “JA” (Sí) y
confírmelo con el botón Enter/Escape.
(4) Ahora seleccione en el menú EQ la opción “Benutzerdefinierter Equalizer”
(Ecualizador definido por el usuario) para usar las configuraciones.
Página 8 de 12 ES
Page 58
Diashow imagen y texto
Texto
Seleccione el intervalo de tiempo para el cambio entre una página y la siguiente.
Imágenes
Seleccione el intervalo de tiempo entre la imagen actual y la siguiente.
Configuraciones de la pantalla
Tiempo de iluminación
Esta opción le permite seleccionar entre diferentes idiomas
Página 9 de 12 ES
Page 59
15. Resolución de errores
Problema – causa posible – solución al problema
No se visualiza nada en la pantalla.
(1) La batería está gastada.
Cárguela.
(2) Los botones están bloqueados.
Desbloquéelos como se describe en "6. Uso".
El dispositivo no reacciona cuando se pulsa el botón Play.
(1) Los botones están bloqueados.
Desbloquéelos como se describe en "6. Uso".
Durante la reproducción falta el sonido.
(1) El altavoz está demasiado bajo
Suba el volumen en el menú de volumen
(2) Archivo de audio defectuoso
Copie el archivo de nuevo
No se puede establecer ninguna conexión con el PC.
(1) No se ha instalado el controlador correctamente
Instale el controlador de nuevo.
(2) Actualice la placa base
(Para ello tenga en cuenta las instrucciones del fabricante)
El valor del indicador del tiempo cambia continuamente.
(1) La cuota de bits de los archivos del MP3 cambia durante la reproducción.
Utilice una cuota de bits única al comprimir.
El PC avisa de un error al conectarse con el dispositivo
(1) El Player fue desconectado del PC durante la transmisión de datos.
Nunca desconecte el dispositivo durante la transmisión de datos.
La memoria indicada del dispositivo no coincide con la memoria real.
(1) Una parte de la memoria se usa para software, formateado y propiedades de
la pantalla.
Los datos del MP3 no se reproducen correctamente.
(1) Los datos del MP3 fueron comprimidos de forma incorrecta, p. ej. en MPEG 1
o 2.
Elimine los archivos con formatos que no son compatibles.
Página 10 de 12 ES
Page 60
No se pueden reproducir los archivos de video.
(1) El formato no es compatible.
El formato del video debe de ser AVI. Si este no es el caso, conviértalo. Tenga
en cuenta el tamaño del formato 128x160 píxeles
(2) El archivo de video está defectuoso.
Copie el archivo de video de nuevo
No se muestran las fotos.
(1) El formato no es compatible.
Convierta la foto a formato JPG.
(2) La imagen tiene una resolución de más de 3520x2816 píxeles
El dispositivo acepta una resolución máxima de 3520x 2816 píxeles.
Asegúrese de que no sobrepasa dicha resolución.
Los archivos de texto no se pueden leer.
(1) El formato no es compatible.
Use archivos con formato txt
16. Datos técnicos
Formatos de tarjeta compatibles
microSD hasta 2GB & microSDHC 4 | 8 GB
Tipo de batería
Baterías de litio-polímero recargables
Vida útil de la batería
Max. 10 horas
LCD
Pantalla de 1,8 pulgadas TFT
Auriculares
5mW+5mW
Formato de Video
AVI (XviD) 128x160
Formato de audio
MP3, WMA
Formato de foto
JPEG / BMP
Resolución de la imagen
7000X7000 píxeles (máx.)
Cuota de bits
MP3: 8-320kbps;
WMA: 8-320kbps;
Página 11 de 12 ES
Page 61
SNR
(INTENSO)
®
49377 Vechta
Germany
www.intenso.de
> 90dB
Puerto USB
USB2.0
Intervalo de uso
0 Celsius ~ +50 Celsius
Temperatura de almacenamiento entre
-20 Celsius ~ +65 Celsius
Uso en un humedad relativa de
20% ~ 90% (40 Celsius)
Capacidad de almacenamiento en un humedad relativa de
20% ~ 93% (40 Celsius)
17. Tenga en cuenta lo siguiente
(1) Plug & Play sólo está posible en Windows 2000/XP/Vista/Windows7.
Instale el controlador para Windows 98/SE.
(2) Desbloquee los botones para manejar el dispositivo.
(3) Cargue la batería cuando se indique en la pantalla.
(4) Para evitar una posible pérdida de datos sólo debe desconectar el reproductor del
PC como se ha indicado.
(5) Cuando el archivo a reproducir es muy grande, el proceso de carga es más largo.
(6) No se puede garantizar que el dispositivo de lectura se compatible con todas las
tarjetas Micro SD disponibles.
(7) Antes de usar el dispositivo retire la tarjeta de plástico de la ranura de la tarjeta
Micro SD.
(8) Software compatible con Windows 2000, Windows XP, Windows Vista, Windows7.
Página 12 de 12 ES
Page 62
1. Vista geral do conteúdo
1. Vista geral do conteúdo ........................................................................................ 1
11. Pesquisar em todos os ficheiros ........................................................................... 7
12. Eliminar um ficheiro .............................................................................................. 7
13. Jogo ...................................................................................................................... 8
14. Ajustes do sistema ................................................................................................ 8
15. Eliminação de erros ............................................................................................ 10
16. Dados técnicos ................................................................................................... 11
17. Tenha em atenção o seguinte ............................................................................ 12
Página 1 de 12 PT
Page 63
2. Notas
Evite choques fortes com o aparelho.
Não use o aparelho em zonas extremamente frias, quentes, húmidas ou
poeirentas. Também não o exponha a radiação solar directa.
Efectue regularmente cópias de segurança, para evitar possíveis perdas de dados.
Evite a utilização em campos fortemente magnetizados.
Proteja o aparelho contra a humidade. Caso entre humidade no aparelho, desligue-
o imediatamente.
Em seguida, limpe e seque o aparelho. Não utilize quaisquer soluções químicas
para limpar o aparelho. Utilize apenas um pano seco.
Não nos responsabilizamos por danos ou perdas de dados no caso de uma falha
no funcionamento, utilização imprópria, reparação do aparelho efectuada pelo
cliente ou substituição da bateria.
Não desmonte o aparelho, nem tente repará-lo você mesmo, caso contrário a
garantia extinguir-se-á.
A utilização de fones de ouvido em volumes extremamente altos pode causar
danos permanentes de audição.
3. Funções
Leitor de MP3&WMA
Leitor de vídeo AVI
Visualizador de imagens JPEG / BMP
Leitor de cartões de memória
Navegação nas pastas
Dispositivo amovível de armazenamento de dados
Jogo
Bateria recarregável de Lítio-Polímero
Ajuste específico do cliente
4. Volume de fornecimento
Por favor verifique se o conteúdo da embalagem está completo
Intenso Video Scooter
Auscultadores estéreo com fita de transporte
Software de conversão (formato AVI)
Cabo USB
Manual de instruções + Cartão de garantia
Página 2 de 12 PT
Page 64
5. Antes de utilizar
Ligar ao PC
Nos sistemas operativos Windows 98/SE, instale um controlador antes de ligar o leitor ao
PC (O download poderá ser feito em www.intenso.de). Para os sistemas operativos WIN
2000/XP/ME/Vista/Windows7, a instalação do controlador não é necessária.
Proceda da seguinte forma:
(1) Antes da utilização, remova o cartão plástico da entrada para cartões Micro SD.
(2) Ligue o leitor à porta USB do PC.
(3) Em seguida, abre-se a janela “Intenso”. Agora pode guardar os dados do seu disco
rígido no dispositivo amovível de armazenamento de dados.
Desligar do PC com segurança
Para Windows 2000/XP/ME/Vista/Windows7:
Com o botão direito do rato, clique no símbolo "Remover o hardware com segurança", no
canto inferior direito, na barra de tarefas. No menu de contexto surgido, seleccione o
ponto "Remover o dispositivo de armazenamento de massa USB", com o botão esquerdo
do rato. Certifique-se de que a transmissão de dados está completamente concluída.
Agora pode remover o dispositivo.
Para Windows 98/SE:
Seleccione o aparelho em "Gestor de Dispositivos" com o botão esquerdo do rato. Clique
agora no ponto de menu "Remover". Certifique-se também de que a transmissão de
dados está completamente concluída.
O dispositivo pode ser agora removido do PC.
Carregamento da bateria:
O aparelho dispõe de uma bateria integrada de Lítio-Polímero. A bateria é carregada
através da ligação USB com o seu PC.
Na primeira utilização do aparelho, certifique-se de que carrega a bateria completamente.
Regra geral, este processo demora 3 horas.
Para carregar a bateria, ligue o aparelho ao PC através do cabo USB. O processo de
carregamento começa automaticamente.
Se quiser saber qual é o estado actual do processo de carregamento, remova o aparelho
do PC. No canto superior direito do visor encontra-se o símbolo da bateria. Se este
símbolo acender a verde, a bateria está completamente carregada.
Nota: Para um desempenho optimizado, a bateria de Lítio-Polímero deve ser utilizada
regularmente. Se não for este o caso, carregue completamente a bateria, pelo menos,
uma vez por mês.
Página 3 de 12 PT
Page 65
Utilização de um cartão Micro SD:
O aparelho tem uma ranhura para cartões microSD
Utilização de um cartão microSD
(1) Insira o cartão Micro SD na respectiva entrada
(2) Prima e mantenha premido o botão Menu, para aceder ao menu principal.
(3) Seleccione "Vista geral das pastas" e prima o botão Menu, para entrar na "Vista
geral das pastas"
(4) Na Vista geral das pastas, encontra 2 directórios:
"Memória interna" e "Cartão Micro SD".
Para reproduzir ficheiros de áudio / vídeo do cartão Micro SD, seleccione o
directório "Cartão Micro SD".
Elementos de comando
A. Visor LCD
B. Play/Pause: Ligar / desligar o software. Função Pause.
C. Enter/Escape: Manter premida durante alguns segundos, para aceder ao menu
principal. Premir brevemente para confirmar a selecção ou para aceder à
navegação nas pastas.
D. Recuar: Faixa anterior. Movimento para cima.
E. Avançar: Faixa seguinte. Movimento para baixo.
F. VOL-: Redução do volume.
G. VOL+: Aumento do volume.
H. Entrada para auscultadores
I. Power Switch: Ligar / desligar o leitor.
J. Porta USB: Ligação com o computador
K. Entrada para cartões Micro SD
Página 4 de 12 PT
Page 66
Ligar e desligar,
Ligar
(1) Desloque o interruptor ON/OFF para a direita até ON.
(2) Carregue na tecla PLAY/PAUSE e mantenha esta tecla carregada até o visor ligar.
Desligar,
(1) Carregue na tecla PLAY/PAUSE e mantenha esta tecla carregada até o visor
desligar.
(2) Desloque o interruptor ON/OFF para a esquerda até OFF.
Observação: este leitor tem um dispositivo de poupança de energia que desliga
automaticamente o aparelho se este não for usado durante mais de três minutos.
6. Funcionamento
Play/Pause
Prima a tecla "B" (Play/Pause) para reproduzir ou para parar.
Volume na reprodução de música/vídeo
Prima a tecla "F" (VOL-) ou."G" (VOL+), para regular o volume.
Selecção da faixa seguinte (faixa seguinte)
Premir brevemente a tecla "E" (avançar).
Selecção da faixa anterior (faixa anterior)
Premir brevemente a tecla "D" (recuar).
Avançar
Manter premida a tecla "E" (avançar)
Retroceder
Manter premida a tecla "D" (recuar)
Bloquear/desbloquear as teclas
Prima simultaneamente as teclas "C" (Enter/Escape) e "G" (VOL-).
Repetição A-B durante reprodução de música
Para reproduzir continuamente uma determinada secção de uma faixa.
(1) Durante a reprodução, prima e mantenha premida a tecla "F" (VOL+), para
determinar o ponto inicial da reprodução contínua.
(2) Prima novamente e mantenha premida a tecla "F" (VOL+), para determinar o ponto
final da reprodução contínua.
(3) Ao premir a tecla "F" (VOL+), a reprodução contínua é concluída.
Página 5 de 12 PT
Page 67
7. Reprodução de música
Modo Música
Prima e mantenha premida a tecla Enter/Escape, para aceder ao menu principal.
Seleccione "Música" e confirme com a tecla Enter/Escape.
Inicie a reprodução com a tecla Enter/Escape.
Vista geral das pastas
(1) No modo Música, prima rapidamente a tecla Enter/Escape.
(2) Com a tecla Avançar/Recuar, pode seleccionar a pasta ou a faixa de música
pretendida. Com a tecla Enter/Escape, confirme a sua selecção.
8. Vídeo
(1) Prima e mantenha premida a tecla Enter/Escape, para aceder ao menu principal.
(2) Seleccione o vídeo com a tecla Avançar/Recuar.
(3) Com a tecla Enter/Escape, pode dar início a um filme de vídeo. A tecla
Avançar/Recuar possibilita a selecção de um ficheiro de vídeo à escolha a partir do
seu directório.
(4) Com a tecla Enter/Escape, pode aceder à navegação nas pastas, durante a
reprodução.
Nota: Este leitor pode reproduzir formatos AVI. Para a utilização de formatos RM, RMVB,
MPG, MPEG, WMV, DAT, VOB, necessitam do software de conversão fornecido,
compatível com Windows.
9. Imagens
Indicação de imagens
(1) Prima e mantenha premida o botão Enter/Escape, para aceder ao menu principal
(2) Seleccione a fotografia com a tecla Avançar/Recuar.
(3) Se tiver seleccionado uma fotografia, com a tecla Avançar/Recuar, passa para a
próxima imagem. Com a tecla Play/Pause, pode iniciar e parar uma apresentação
de diapositivos. Com a tecla Enter/Escape, pode aceder à vista geral das pastas,
durante a apresentação de diapositivos.
Nota: O aparelho pode apenas reproduzir imagens em formato JPG / BMP.
Página 6 de 12 PT
Page 68
10. Texto
Leitura de ficheiros .txt
(1) Prima e mantenha premida a tecla Enter/Escape, para aceder ao menu principal
(2) Seleccione "Texto" e prima a tecla Enter/Escape para confirmar.
(3) Com a tecla Avançar/Recuar, seleccione um ficheiro de texto e confirme com a
tecla Enter/Escape.
(4) Prima a tecla Avançar/Recuar, para aceder à parte superior ou inferior do texto que
não é apresentada no visor. Ou seleccione o scroll automático com a tecla Play/
Pause. (Em Ajustes, pode seleccionar o intervalo de tempo entre 2 e 10 seg.:
"Ajustes -> Apresentação de diapositivos -> Texto").
(5) Quando estiver a ler, poderá marcar um ponto com o marcador (bookmark), para
prosseguir com a leitura posteriormente. Este processo é descrito mais
detalhadamente no próximo ponto.
Nota: Pode memorizar até 3 marcadores.
Criar marcadores
(1) Vá para o ponto que pretende assinalar.
(2) Prima brevemente a tecla VOL+. Surge a indicação "Save Bookmark" no visor.
(3) Com a tecla Avançar/Recuar, seleccione um número do marcador. Confirme a sua
selecção com a tecla Enter/Escape. O marcador é memorizado. Começa-se a partir
da primeira linha da página actual.
(4) Para carregar a página marcada, prima brevemente a tecla VOL, de modo a aceder
aos marcadores memorizados. Seleccione um marcador e confirme com a tecla
Enter/Escape. É agora conduzido para esta página.
Nota: Se o seu ficheiro de texto não for iniciado, o formato que seleccionou não é
suportado pelo leitor. Seleccione um outro formato de texto.
11. Pesquisar em todos os ficheiros
Para pesquisar em todos os ficheiros memorizados no leitor, proceda do seguinte modo:
(1) Prima e mantenha premida a tecla Enter/Escape, para aceder ao menu principal.
(2) Seleccione o ponto de menu "Vista geral das pastas". Pode seleccionar entre
"Memória interna" e "Cartão Micro SD". Confirme com a tecla Menu.
(3) Com a tecla Avançar/Recuar, seleccione o ficheiro pretendido e confirme a sua
selecção com a tecla Enter/Escape.
12. Eliminar um ficheiro
(1) Na vista geral das pastas, seleccione o ficheiro que pretende eliminar.
(2) Prima brevemente a tecla VOL-. Surge uma caixa de diálogo.
(3) Com a tecla Avançar/Recuar, seleccione "Sim" e confirme com a tecla
Enter/Escape.
Página 7 de 12 PT
Page 69
13. Jogo
Este aparelho inclui o jogo Tetris World. Para iniciar este jogo, seleccione, no menu
principal, a opção "Jogo" e confirme com a tecla Enter/Escape.
Iniciar jogo
Prima a tecla "PLAY/PAUSE"
Mover os blocos para a direita ou esquerda
Prima a tecla Recuar ou Avançar
Rodar os blocos
Prima a tecla Enter/Escape
Descer os blocos
Prima a tecla VOL
Sair do jogo
Prima e mantenha premida a tecla Enter/Escape
14. Ajustes do sistema
Adaptação dos ajustes:
(1) No menu principal, seleccione o ponto "Ajustes".
(2) Com a tecla Avançar/Recuar, seleccione o ponto de menu que pretende e confirme
com a tecla Enter/Escape, para alterar os ajustes. Com a "Tecla Play/Pause", pode
retroceder.
Música
Repetição
(1) Faixa simples: Reproduz a faixa actual e, em seguida, pára a reprodução.
(2) Repetir faixa: Repete a faixa actual.
(3) Pasta simples: Repete uma vez as faixas de uma pasta seleccionada e, em
seguida, pára a reprodução
(4) Repetir pasta: Repete todas as faixas da pasta actual.
(5) Todas as faixas uma vez: Reproduz todas as faixas memorizadas e conclui a
reprodução com a última faixa.
(6) Repetir todas as faixas: Repete todas as faixas memorizadas.
(7) Função Intro: Reproduz os primeiros 10 seg. de cada ficheiro áudio.
Modo de reprodução
(1) Reprodução normal: Reproduz os ficheiros de áudio sequencialmente
(2) Reprodução aleatória: Reprodução aleatória de todas as faixas.
Seleccionar equalizador
Normal, 3D, Rock, Pop, Clássico, Bass, Jazz, equalizador definido pelo utilizador
Equalizador definido pelo utilizador
(1) Prima a tecla Avançar ou Recuar, para seleccionar a coluna EQ.
(2) Prima as teclas VOL+ / VOL-, para ajustar os valores.
Página 8 de 12 PT
Page 70
(3) Prima novamente a tecla Avançar até o cursor se encontrar no botão "SIM" e
confirme com a tecla Enter/Escape.
(4) No menu EQ, seleccione agora a opção "Equalizador definido pelo utilizador", para
utilizar os ajustes.
Apresentação de diapositivos de imagem & texto
Texto
Seleccione o intervalo de tempo para passar da página actual para a página seguinte.
Imagens
Seleccione o intervalo de tempo entre a imagem actual e a imagem seguinte.
Ajustes do visor
Duração da iluminação
5 segundos,
10 segundos,
15 segundos,
20 segundos,
30 segundos,
Sempre ligada
Brilho
(Determine o brilho do visor)
Modo de iluminação
Normal
Modo de poupança de energia (Desligue a iluminação do visor, se não for activada
qualquer função)
Sistema
Sobre: Informações sobre o produto
Actualização do firmware: upgrade do firmware
Ajustes de fábrica: Carrega os ajustes de fábrica
Problema – Possíveis causas – Resolução do problema
Não aparece nada no visor.
(1) A bateria está vazia.
Carregue a bateria.
(2) As teclas estão bloqueadas.
Desbloqueie as teclas, como é descrito em "6. Funcionamento".
O aparelho não reage quando é premida a tecla Play.
(1) As teclas estão bloqueadas.
Desbloqueie as teclas, como é descrito em "6. Funcionamento".
Durante a reprodução não há som.
(1) O volume está demasiado baixo
Aumente o volume no menu de volume
(2) Ficheiro de áudio danificado
Transfira novamente o ficheiro
Não é possível estabelecer a ligação com o PC.
(1) O controlador não foi instalado correctamente
Instale novamente o controlador.
(2) Efectue uma actualização da placa-mãe
(Para isso, siga as indicações do fabricante)
A indicação do tempo altera-se constantemente
(1) A taxa de bits dos ficheiros MP3 altera-se durante a reprodução.
Utilize uma taxa de bits uniforme ao compactar.
O PC indica um erro na ligação com o aparelho
(1) O leitor for removido do PC durante a transmissão de dados.
Nunca remova o aparelho durante a transmissão de dados.
O espaço de memória indicado do aparelho não corresponde ao espaço de
memória real.
(1) Uma parte da memória é utilizada para o software, a formatação e para as
características do visor.
Os dados MP3 não são reproduzidos correctamente.
(1) Os dados MP3 foram compactados num formato errado, por exemplo em
MPEG 1 ou 2.
Elimine os ficheiros nos formatos não suportados pelo leitor.
Página 10 de 12 PT
Page 72
Os dados de vídeo não são reproduzidos.
(1) O formato não é suportado pelo aparelho.
O formato de vídeo tem de ser AVI. Se este não for o caso, converta o ficheiro.
Tenha em atenção que o tamanho do formato deve ser 128x160 píxeis
(2) O ficheiro de vídeo está danificado.
Transfira novamente o seu ficheiro de vídeo
As fotografias não são apresentadas.
(1) O formato do ficheiro não é suportado pelo aparelho.
Converta a fotografia para um formato JPG.
(2) A imagem tem uma resolução superior a 3520x2816 píxeis
Uma aparelho suporta apenas uma resolução máxima de 3520x 2816 píxeis.
Certifique-se de que a resolução não é ultrapassada.
Não é possível ler os ficheiros de texto.
(1) O formato não é suportado pelo aparelho.
Utilize o formato .txt
16. Dados técnicos
Formatos de cartão suportados
microSD até 2GB & microSDHC 4 | 8 GB
Tipo de bateria
Bateria recarregável de Lítio-Polímero
Duração da bateria
Max. 10 horas
LCD
Ecrã TFT de 1,8“ polegadas
Auscultadores
5mW+5mW
Formato de vídeo
AVI (XviD) 128x160
Formatos de áudio
MP3, WMA
Formato de fotografia
JPEG / BMP
Resolução da imagem
7000X7000 píxeis (máx.)
Taxa de bits
MP3: 8-320kbps;
WMA: 8-320kbps
Página 11 de 12 PT
Page 73
SNR
(INTENSO)
®
49377 Vechta
Germany
www.intenso.de
> 90dB
Porta USB
USB2.0
Operacional entre
0 Celsius ~ +50 Celsius
Temperatura de armazenamento entre
-20 Celsius ~ +65 Celsius
Operacional com uma humidade relativa do ar de
20% ~ 90% (40 Celsius)
Pode ser armazenado com uma humidade relativa do ar de
20% ~ 93% (40 Celsius)
17. Tenha em atenção o seguinte
(1) A função Plug & Play apenas é possível no Windows 2000/XP/Vista/ Windows7.
Instale o controlador no Windows 98/SE.
(2) Desbloqueie o bloqueio das teclas, para poder utilizar o aparelho.
(3) Carregue a bateria quando surgir a respectiva indicação no visor.
(4) Apenas remova o aparelho do PC do modo mencionado, de modo a evitar
possíveis perdas de dados.
(5) Se o ficheiro gravado for muito grande, o seu carregamento demora mais tempo.
(6) Não pode ser garantida uma compatibilidade do leitor com todos os cartões Micro
SD disponíveis.
(7) Antes da utilização, remova o cartão plástico da entrada para cartões Micro SD.
(8) Compatibilidade de software no Windows 2000, Windows XP,Windows Vista,
Windows7.
Página 12 de 12 PT
Page 74
1. Spis treści
1. Spis treści ............................................................................................................. 1
16. Dane techniczne ................................................................................................. 11
17. Należy pamiętać. ................................................................................................ 12
Strona 1 z 12 PL
Page 75
2. Wskazówki
Uważać, aby nie upuścić urządzenia.Nie używać urządzenia w ekstremalnie zimnych, gorących, wilgotnych lub
zapylonych terenach. Nie narażać go także na bezpośrednie działanie promieni słonecznych.
Należy przeprowadzać często procedurę zabezpieczania danych, aby uniknąć ich
utraty.
Unikać stosowania urządzenia w obszarach objętych silnym polem magnetycznym.Chronić urządzenie przed wilgocią. W przypadku, gdy do wnętrza urządzenia
dostanie się wilgoć, należy je natychmiast wyłączyć.Następnie należy oczyścić i osuszyć urządzenie.Do czyszczenia urządzenia nie
wolno stosować żadnych roztworów chemicznych. Stosować wyłącznie suchą
ściereczkę.
Nie bierzemy na siebie odpowiedzialności za szkody ani za utratę danych w wyniku
naprawy urządzenia lub wymiany akumulatora.
Nie wolno rozkładać urządzenia i nie należy próbować samodzielnie dokonywać
napraw, ponieważ pociąga to za sobą wygaśnięcie gwarancji.
Podczas długotrwałego użytkowania słuchawki dousznej lub słuchawek przy
wysokiej głośności może dojść do trwałego uszkodzenia słuchu.
3. Funkcje
Odtwarzacz MP3&WMA
Odtwarzacz AVI Video
Przeglądarka zdjęć JPEG / BMP
Czytnik kart pamięci
Nawigacja folderów
Wymienny nośnik danych
Gra
Wbudowana litowo-jonowa bateria z możliwością ładowania
Ustawienia specjalne klienta
4. Zawartość opakowania
Skontrolować, czy zawartość opakowania jest kompletna.
Intenso Video Scooter
Słuchawki stereo z paskiem
Program do konwertowania (format AVI)
Kabel USB
Instrukcja obsługi + Karta gwarancyjna
Strona 2 z 12 PL
Page 76
5. Przed użyciem
Podłączanie do komputera
W przypadku systemu operacyjnego Windows 98/SE przed podłączeniem odtwarzacza do
komputera należy zainstalować sterownik. (Do pobrania na stronie www.intenso.de)
W przypadku systemu operacyjnego WIN 2000/XP/ME/Vista/Windows7 instalacja
sterownika nie jest konieczna.
Sposób postępowania:
(1) Przed użyciem urządzenia usunąć plastikową kartę z gniazda Micro SD.
(2) Podłączyć odtwarzacz do złącza USB w komputerze.
(3) Otworzy się okno “Intenso”. Teraz można zapisać dane znajdujące się na twardym
dysku na wymiennym nośniku danych.
Bezpieczne usuwanie urządzenia z komputera
W przypadku Windows 2000/XP/ME/Vista/Windows7:
Kliknąć prawym przyciskiem myszy u dołu po prawej stronie paska narzędzi na symbol
„Bezpieczne usuwanie sprzętu“. Z wyświetlonego menu kontekstowego należy wybrać
punkt „Usuń napęd nośnika pamięci masowej USB“. Upewnić się, że transfer danych
został zakończony.
Następnie można usunąć urządzenie.
W przypadku Windows 98/SE:
Przy pomocy lewego przycisku myszy w „Managerze urządzeń“ wybrać urządzenie.
Kliknąć następnie na punkt menu „Usuń“. Tutaj także upewnić się, że transfer danych
został zakończony.
Można odłączyć urządzenie od komputera.
Ładowanie bateria:
Urządzenie wyposażone jest w ładowalny bateria litowo-jonowa. Bateria ładowany jest
poprzez złącze USB przy komputerze.
Przed pierwszym użyciem należy pamiętać o tym, aby całkowicie naładować bateria,
proces ten trwa z reguły 3 godziny.
W celu naładowania bateria należy podłączyć urządzenie za pomocą kabla USB do
komputera. Proces ładowania rozpoczyna się automatycznie.
Aby dowiedzieć się, jaki jest aktualny status procesu ładowania, należy odłączyć
urządzenie od komputera. Na wyświetlaczu u góry po prawej stronie pojawi się symbol
bateria. Jeżeli symbol będzie świecić się na zielono, oznacza to, że bateria jest
naładowany.
Wskazówka: Aby zapewnić optymalną wydajność, bateria litowo-jonowa musi być
regularnie używany. Jeżeli jest to niemożliwe, należy naładować całkowicie bateria
przynajmniej raz w miesiącu.
Strona 3 z 12 PL
Page 77
Używanie karty Micro SD:
Urządzenie wyposażone jest w gniazdo kart micro SD.
Używanie karty micro SD
(1) Umieścić kartę Micro SD w gnieździe na karty.
(2) Wcisnąć przycisk Menu w celu wywołania menu głównego.
(3) Wybrać „Przegląd folderów“ i wcisnąć przycisk Menu, aby wejść do „Przeglądu
folderów“.
(4) W zakładce „Przegląd folderów“ znajdują się 2 wykazy:
"Pamięć wewnętrzna" i "Karta Micro SD".
W celu przeniesienia plików audio lub wideo z karty Micro SD wybrać wykaz
„Karta Micro SD“.
Elementy obsługowe
A. Wyświetlacz LCD
B. Play/ Pause: włączanie i wyłączanie oprogramowania funkcja przerwy
C. Enter/ Escape: Aby przejść do menu głównego, należy przytrzymać przez dłuższy
czas wciśnięty przycisk. Aby potwierdzić wybór lub wywołać Nawigację folderów,
należy na krótko wcisnąć przycisk.
D. Do tyłu: poprzedni tytuł, ruch do góry
E. Do przodu: następny tytuł, ruch w dół
F. VOL-: zmniejszenie głośności
G. VOL+: zwiększenie głośności
H. Wejście słuchawek
I. Przełącznik power: włączanie i wyłączanie urządzenia
J. Port USB: podłączenie do komputera
K. Gniazdo karty Micro SD
Strona 4 z 12 PL
Page 78
Włączanie i wyłączanie,
Włączanie
(1) Prosimy przesunąć przełącznik ON/OFFw prawo, na pozycję ON.
(2) Prosimy nacisnąć przycisk PLAY/PAUSE i trzymać go wciśniętytak długo,
Wyłączanie,
(1) Prosimy nacisnąć przycisk PLAY/PAUSE i trzymać go wciśnięty tak długo,
(2) Prosimy przesunąć przycisk ON/OFFw lewo, na pozycję OFF.
Uwaga: Odtwarzacz ten posiada urządzenie pozwalające na oszczędzanie energii, które
wyłącza go automatycznie, jeśli pozostaje nieużywany dłużej niż trzy minuty.
aż wyświetlacz włączy się.
aż wyświetlacz wyłączy się.
6. Obsługa
Play/ Pause
Wcisnąć przycisk „B“ (Play/ Pause) w celu rozpoczęcia lub zatrzymania odtwarzania.
Głośność przy odtwarzaniu muzyki/ filmów
Wcisnąć przycisk „F“ (VOL-) lub „G“ (VOL+) w celu regulacji głośności.
Wybór następnej ścieżki (następnego tytułu)
Wcisnąć na krótko przycisk „E“ (Do przodu).
Wybór poprzedniej ścieżki (poprzedniego tytułu)
Wcisnąć na krótko przycisk „D“ (Do tyłu).
Przewijanie do przodu
Wcisnąć i przytrzymać przycisk „E“ (Do przodu).
Przewijanie do tyłu
Wcisnąć i przytrzymać przycisk „D“ (Do tyłu).
Blokowanie i odblokowywanie przycisków
Wcisnąć jednocześnie przyciski „C“ (Enter/ Escape) i „G“ (VOL-).
Powtarzanie A-B przy odtwarzaniu muzyki
Funkcja ta pozwala na wielokrotne powtarzanie fragmentu utworu.
(1) Podczas odtwarzania utworu wcisnąć i przytrzymać przycisk „F“ (VOL+), aby
wyznaczyć początek powtarzanego fragmentu.
(2) Ponownie wcisnąć przycisk „F“ (VOL+),aby wyznaczyć koniec powtarzanego
Wcisnąć i przytrzymać przycisk Enter/ Escape, aby przejść do menu głównego.
Wybrać „Muzyka“ i potwierdzić wybór przyciskiem Enter/ Escape.
Rozpocząć odtwarzanie przy pomocy przycisku Enter/ Escape.
Przegląd folderów
(1) W trybie „Muzyka” wcisnąć na krótko przycisk Enter/ Escape.
(2) Przy pomocy przycisku Do przodu/ Do tyłu można wybrać folder lub utwór
muzyczny. Wybór należy potwierdzić przyciskiem Enter/ Escape.
8. Wideo
(1) Wcisnąć i przytrzymać przycisk Enter/ Escape, aby przejść do menu głównego.
(2) Przy pomocy przycisku Do przodu/ Do tyłu wybrać plik wideo.
(3) Przy pomocy przycisku Enter/ Escape można rozpocząć odtwarzanie filmu wideo.
Za pomocą przycisku Do przodu/ Do tyłu można wybrać dowolny plik wideo ze
spisu.
(4) Podczas odtwarzania przy pomocy przycisku Enter/ Escape można wywołać
Przegląd folderów.
Wskazówka:Niniejszy odtwarzacz odtwarza wyłącznie format AVI. Do odtwarzania
formatów RM, RMVB, MPG, MPEG, WMV, DAT, VOB wymagane jest zainstalowanie
dostarczonego wraz z urządzeniem, kompatybilnego z Windows oprogramowania
konwertującego.
9. Zdjęcia
Pokaz zdjęć
(1) Wcisnąć i przytrzymać przycisk Enter/Escape, aby przejść do menu głównego.
(2) Przy pomocy przycisków Do przodu/ Do tyłu wybraćzdjęcie.
(3) Po wybraniu zdjęcia przy pomocy przycisków Do przodu/ Do tyłu można przejść
do następnego. Przy pomocy przycisku Play/ Pause można włączyć i zatrzymać
pokaz slajdów. Przy pomocy przycisku Enter/ Escape można podczas przeglądu
slajdów wywołać Przegląd folderów.
Wskazówka:Urządzenie może odtwarzać zdjęcia wyłącznie w formacie JPG/ BMP.
Strona 6 z 12 PL
Page 80
10. Tekst
Odczytywanie plików txt
(1) Wcisnąć i przytrzymać przycisk Enter/ Escape, aby przejść do menu głównego.
(2) Wybrać tryb „Tekst” i potwierdzić wybór przyciskiem Enter/ Escape.
(3) Przy pomocy przycisku Do przodu/ do tyłu wybrać plik tekstowy i potwierdzić
wybór przy pomocy przycisku Enter/ Escape.
(4) Wcisnąć przycisk Do przodu/ Do tyłu, aby przejść do górnego lub dolnego
fragmentu tekstu, który nie jest pokazywany na wyświetlaczu. Lub przy pomocy
przycisku Play/ Pause wybrać automatyczne przewijanie. (W Ustawieniach
można wybrać przedział czasowy w zakresie od 2 do 10 sekund: “Ustawienia ->
Pokaz slajdów -> Tekst”).
(5) Podczas czytania można zaznaczyć zakładką wybrane miejsce.Czynność ta
opisana jest dokładniej w następnym punkcie.
Wskazówka:Można zapisać do 3 zakładek.
Sporządzanie zakładki
(1) Przejść do miejsca, które ma zostać zaznaczone.
(2) Wcisnąć na krótko przycisk VOL+. Na wyświetlaczu pojawi się znak „Save
Bookmark”.
(3) Przy pomocy przycisków Do przodu/ Do tyłu wybrać numer zakładki. Potwierdzić
wybór przyciskiem Enter/ Escape. Zakładka została zapisana. Start od pierwszej
linijki bieżącej strony.
(4) W celu otwarcia zaznaczonej strony, należy wcisnąć na krótko przycisk VOL-
wywołując zapisaną zakładkę. Wybrać zakładkę i potwierdzić wybór przyciskiem
Enter/ Escape. Nastąpi przejście do tej strony.
Wskazówka: Jeżeli plik tekstowy nie zostanie otwarty, oznacza to, że nie jest obsługiwany
wybrany format tekstowy. Należy wybrać inny format tekstowy.
11. Przeszukiwanie wszystkich plików
W celu przeszukania wszystkich plików znajdujących się w odtwarzaczu należy
postępować w następujący sposób:
(1) Wcisnąć i przytrzymać przycisk Enter/ Escape, aby przejść do menu głównego.
(2) Wybrać punkt menu „Przegląd folderów”. Do wyboru jest „Pamięć wewnętrzna”
oraz “Karta Micro SD”. Potwierdzić wybór przyciskiem Menu.
(3) Przy pomocy przycisków Do przodu/ Do tyłu wybrać plik i potwierdzić wybór
przyciskiem Enter/ Escape.
12. Usuwanie pliku
(1) W „Przeglądzie folderów” wybrać plik, który ma zostać usunięty.
(2) Wcisnąć na krótko przycisk VOL-. Pojawi się okno dialogowe.
(3) Przy pomocy przycisków Do przodu/ Do tyłu wybrać „Tak” i potwierdzić wybór
przyciskiem Enter/ Escape.
Strona 7 z 12 PL
Page 81
13. Gra
Niniejsze urządzenie wyposażone jest w grę Tetris World. Aby uruchomić tę grę, należy
wybrać w menu głównym opcję „Gra” i potwierdzić wybór przyciskiem Enter/ Escape.
Wcisnąć i przytrzymać wciśnięty przycisk Enter/ Escape.
14. Ustawienia systemu
Dopasowanie ustawień:
(1) W menu głównym wybrać punkt „Ustawienia”.
(2) W celu dokonania zmian w ustawieniach wybrać przy pomocy przycisków Do
przodu/ Do tyłu odpowiedni punkt menu i potwierdzić wybór przyciskiem Enter/
Escape. Przy użyciu przycisku Play/ Pause można wrócić do menu wyjściowego.
Muzyka
Powtarzanie
(1) Jednokrotne odtwarzanie utworu: Odtwarzana jest aktualna ścieżka i
odtwarzanie zostaje zakończone.
(2) Powtarzanie utworu:Odtwarzanie wybranej ścieżki jest powtarzane.
(3) Jednokrotne odtwarzanie folderu:Odtwarzane są wszystkie utwory znajdujące
się w danym folderze, następnie odtwarzanie zostaje zakończone.
(4) Powtarzanie odtwarzania folderu: Odtwarzanie wszystkich utworów z
bieżącego folderu jest powtarzane.
(5) Jednokrotne odtwarzanie wszystkich utworów:Odtwarzane są wszystkie
zapisane utwory, po odtworzeniu ostatniego odtwarzanie zostaje zakończone.
(6) Powtarzanie odtwarzania wszystkich utworów: Odtwarzanie wszystkich
zapisanych utworów jest powtarzane.
(7) Funkcja Intro:Odtwarzanie pierwszych 10 s każdego pliku audio.
Tryb odtwarzania
(1) Normalne odtwarzanie:Pliki audio odtwarzane są po kolei.
(2) Przypadkowe odtwarzanie: Utwory odtwarzane są w przypadkowej kolejności.
Wybór equalizera
normalny, 3D, rock, pop, klasyka, bas, jazz, zdefiniowany przez użytkownika equalizer
Strona 8 z 12 PL
Page 82
Equalizer zdefiniowany przez użytkownika
(1) Wcisnąć przycisk Do przodu lub Do tyłu, aby wybrać kolumnę EQ.
(2) Przy pomocy przycisków VOL+/ VOL- ustawić wartości.
(3) Wciskać przycisk Do przodu, aż kursor znajdzie się na polu „Tak” i potwierdzić
wybór przyciskiem Enter/ Escape.
(4) W menu EQ wybrać opcję „Equalizer zdefiniowany przez użytkownika”.
Pokaz slajdów zdjęcia & tekst
Tekst
Wybrać przedział czasu, po jakim następuje przejście z aktualnej strony do następnej.
Zdjęcia
Wybrać przedział czasu, po jakim następuje przejście z aktualnego zdjęcia do
następnego.
Znieść blokadę przycisków, tak jak opisane jest to w punkcie „6 Obsługa”.
Urządzenie nie reaguje na przycisk Play.
(1) Przyciski są zablokowane.
Znieść blokadę przycisków, tak jak opisane jest to w punkcie „6 Obsługa”.
Brak dźwięku podczas odtwarzania.
(1) Głośność jest zbyt mała.
Zwiększyć głośność w menu głośności.
(2) Plik audio jest uszkodzony.
Ponownie pobrać plik.
Podłączenie do komputera nie udaje się.
(1) Sterownik został nieprawidłowo zainstalowany.
Ponownie zainstalować sterownik.
(2) Wykonać aktualizację płyty głównej.
(Uwzględnić wskazówki producenta.)
Wskazanie czasu ciągle się zmienia.
(1) Średnia bitowa pliku MP3 zmienia się podczas odtwarzania.
Podczas kompresji należy zastosować jednolitą średnią bitową.
Przy podłączaniu odtwarzacza komputer zgłasza błąd.
(1) Odtwarzacz został odłączony od komputera podczas przenoszenia danych.
Nie odłączać odtwarzacza podczas przenoszenia danych.
Podana pamięć odtwarzacza nie odpowiada faktycznej pamięci.
(1) Część pamięci używana jest na oprogramowanie oraz właściwości
wyświetlacza.
Pliki MP3 są niepoprawnie odtwarzane.
(1) Pliki MP3 zostały skompresowane w nieprawidłowym formacie, np. MPEG 1
lub 2.
Skasować formaty danych, które nie są obsługiwane.
Strona 10 z 12 PL
Page 84
Odtwarzanie plików wideo jest niemożliwe.
(1) Urządzenie nie obsługuje danego formatu.
Wymagany format wideo to AVI. Jeżeli plik jest w innym formacie, należy go
przekonwertować. Pamiętać przy tym o rozmiarze formatu 128x160 pikseli.
(2) Plik wideo jest uszkodzony.
Ponownie ściągnąć plik wideo.
Zdjęcia nie są pokazywane.
(1) Urządzenie nie obsługuje danego formatu.
Przekonwertować zdjęcie na format JPG.
(2) Zdjęcie ma rozdzielczość większą niż 3520x2816 pikseli.
Urządzenie obsługuje zdjęcia o maks. rozdzielczości 3520x 2816 pikseli.
Upewnić się, że dopuszczalna rozdzielczość nie została przekroczona.
Odczytanie pliku tekstowego jest niemożliwe.
(1) Urządzenie nie obsługuje danego formatu.
Zastosować format txt.
16. Dane techniczne
Obsługiwane formaty kart
microSD do 2GB & microSDHC 4 | 8 GB
Typ baterii
Wbudowana litowo-jonowa bateria z możliwością ładowania
Żywotność baterii
Max. 10 godzin
LCD
1,8-calowy wyświetlacz TFT
Słuchawki
5mW+5mW
Format wideo
AVI (XviD) 128x160
Formaty audio
MP3, WMA
Format zdjęć
JPEG / BMP
Rozdzielczość obrazu
7000X7000 pikseli (maks.)
Średnia bitowa
MP3: 8-320kbps;
WMA: 8-320kbps
Strona 11 z 12 PL
Page 85
SNR
(INTENSO)
®
49377 Vechta
Germany
www.intenso.de
>90dB
Port USB
USB 2.0
Praca w temperaturze
od 0 do +50 stopni C
Temperatura przechowywania
od -20 do +65 stopni C
Praca przy względnej wilgotności powietrza
od 20% do 90% (40 stopni C)
Przechowywanie przy względnej wilgotności powietrza
od 20% do 93% (40 stopni C)
17. Należy pamiętać.
(1) Funkcja plug & play możliwa jest tylko przy Windows 2000/XP/Vista/Windows7.
W przypadku Windows 98/SE należy zainstalować sterownik.
(2) Znieść blokadę przycisków, aby móc pracować z urządzeniem.
(3) Naładować baterię, jeżeli na wyświetlaczu pojawia się odpowiedni komunikat.
(4) Odłączać odtwarzacz od komputera tylko w opisany sposób, co pozwoli uniknąć
utraty danych.
(5) Jeżeli plik jest bardzo duży, pobieranie go trwa dłużej.
(6) Nie można zagwarantować kompatybilności niniejszego czytnika ze wszystkimi
dostępnymi kartami Micro SD.
(7) Przed użyciem urządzenia usunąć z gniazda Micro SD plastikową kartę.
(8) Obsługiwane oprogramowanie Windows 2000, Windows XP, Windows Vista,
Windows7.
Strona 12 z 12 PL
Page 86
1. Содержание
1. Содержание ......................................................................................................... 1
попадания воды или другой жидкости внутрь устройства немедленно
выключите его и произведите чистку устройства.
Во избежание коррозии не используйте для чистки устройства химических
растворов. Чистку осуществляйте сухой тканью.
Мы не несем ответственности за повреждения и потерю данных,
произошедшую в результате неисправной работы, неверного использования,
ремонта или замены батареи.
Запрещается самостоятельно разбирать, ремонтировать устройство либо
вносить в него изменения. Эти действия влекут за собой аннулирование
гарантии.
Использование наушников со слишком высоким звуком может привести к
долговременному повреждению слуха.
3. Основныефункции
Проигрывательфайловформата MP3 и WMA
Видеопроигрывательфайлов AVI
Средство просмотра изображений JPEG / BMP
СчитывателькартпамятиПеремещение по папкамСъемное запоминающее устройствоИгравстроенная перезаряжаемая батарея Li-polymer
Индивидуально настраиваемые параметры
4. Комплектностьпоставки
Проверьте наличие в комплекте поставки следующих компонентов. При отсутствии
каких-либо из этих компонентов обратитесь к продавцу:
ОсновнойблокСтереофоническиенаушникиКомпакт-диск с приложениямиКабель USB
Руководство пользователя и гарантийный формуляр
Стр. 2 из 14 RU
Page 88
5. Подготовка к использованию
Соединение с компьютером
Если у Вас стоит операционная система Windows 98/SE, инсталлируйте драйвер,
прежде чем подсоединить плеер к компьютеру (сгрузить драйвер Вы можете по
адресу www.intenso.de). Если у Вас стоит операционная система WIN
2000/XP/ME/Vista/Windows7, инсталляция драйвера не потребуется.
Вам необходимо поступить следующим образом:
(1) Перед использованием удалить пластиковую карту из гнезда для карт
micro SD.
(2) Подключить плеер к USB-входу компьютера.
(3) После этого появится окно “Intenso”. Теперь Вы можете сохранить данные,
находящиеся на Вашем жестком диске, на переносном запоминающем
устройстве.
Безопасное извлечение устройства
Для операционной системы Windows 2000/XP/ME/Vista/Windows7:
Нажмите правой клавишей мыши находящийся справа внизу на панели
инструментов символ «Безопасное извлечение устройства». На появившемся
контекстном меню выберите пункт „Запоминающее устройство для USB“, нажав на
устройство, которое Вы хотите удалить, левой клавишей мыши. Убедитесь в том, что
процесс передачи данных полностью завершен.
Теперь Вы можете извлечь запоминающее устройство.
Для операционной системы Windows 98/SE:
Выберите устройство в „Администраторе устройств“, нажав на него левой клавишей
мыши. Теперь нажмите на пункт меню „Удалить“. Также убедитесь в том, что
процесс передачи данных в данном случае также полностью завершен.
Теперь Вы можете извлечь запоминающее устройство.
Зарядка Батарея:
Устройство имеет встроенную li-полимер Батарею. Батарея заряжается при
подключении устройства ко входу USB Вашего компьютера. При первом
использовании устройства убедитесь в том, чтобы батарея была полностью
заряжена. Зарядка, как правило, длится 3 часа. Для зарядки батареи подключите
Ваше устройство с помощью кабеля USB к Вашему компьютеру. Процесс зарядки
начнется автоматически. Если Вы хотите узнать текущий статус зарядки,
отсоедините устройство от компьютера. Вверху справа на дисплее Вы увидите
символ батареи. Если символ горит зеленым светом, батарея заряжена полностью.
Внимание: Для того чтобы устройство работало оптимально, li-полимер батарею
следует регулярно использовать. Если батарея используется нерегулярно, Вам
следует полностью заряжать ее не менее одного раза в месяц.
звуком или видео, хранящихся на карте памяти, откройте папку “Inside
Memory”.
Описаниеклавиш
A. ЖК-дисплей
B. Воспроизведение/пауза: Служитдлявключенияивыключенияустройства.
Обеспечивает также воспроизведение и приостановку воспроизведения
звуковых файлов.
C. Вход/Выход: Для входа в основное меню нажмите и удерживайте нажатой
некоторое время. Для подтверждения выбора или перехода в режим обзора
папок нажмите и сразу отпустите.
D. Предыдущаядорожка: Воспроизведение предыдущей дорожки. Служит
также для перемещения вверх.
E. Следующаядорожка: Воспроизведение предыдущей дорожки. Служит также
для перемещения вниз.
F. VOL-: Уменьшениегромкости.
G. VOL+: Увеличениегромкости.
H. Гнездонаушников
I. Выключательпитания: Служитдлявключенияивыключенияпитания
J. Порт USB: Подсоединениеккомпьютеру
K. Гнездокартыпамяти: Служитдляустановкикарты Micro-SD
Стр. 4 из 14 RU
Page 90
Включение и выключение питания
Для включения питания
(1) Длявключенияпитанияпередвиньтевыключательпитания.
(2) Нажмитеиудерживайтенажатойкнопку "ВОСПРОИЗВЕДЕНИЕ/ПАУЗА" до
появлениянадисплеезапроса.
Для выключения питания
(1) Нажмите и удерживайте нажатой кнопку "ВОСПРОИЗВЕДЕНИЕ/ПАУЗА" до
появления на дисплее запроса.
(2) Для выключения питания передвиньте выключатель питания. (Не забывайте
выполнять эту операцию для экономии заряда аккумулятора.)
Примечание. Этот проигрыватель имеет функцию энергосбережения,
автоматически выключающую устройство, если оно не используется примерно 3
минуты.
6. Основные операции
Воспроизведение/пауза
Для воспроизведения или приостановки воспроизведения нажмите кнопку
"ВОСПРОИЗВЕДЕНИЕ/ПАУЗА".
Регулировка громкости
На короткое время нажмите кнопку "VOL+"/"VOL-" для уменьшения или увеличения
громкости.
Предыдущая дорожка
Нажмите и сразу отпустите кнопку "ПРЕДЫДУЩАЯ ДОРОЖКА".
Следующая дорожка
Нажмите и сразу отпустите кнопку "СЛЕДУЮЩАЯ ДОРОЖКА".
Ускоренное перемещение вперед
Нажмите и удерживайте нажатой кнопку "СЛЕДУЮЩАЯ ДОРОЖКА".
Ускоренное перемещение назад
Нажмите и удерживайте нажатой кнопку "ПРЕДЫДУЩАЯ ДОРОЖКА".
Блокировка и снятие блокировки кнопок
Для защиты кнопок от случайного нажатия либо для разблокирования кнопок
одновременно нажмите кнопки "Вход/Выход" и "VOL-".
выберите меню “Music” (Музыка) и нажмите кнопку "Вход/Выход" для подтверждения
выбора. Теперь устройство находится в режиме воспроизведения музыки — для
воспроизведения музыки см. основные операции.
Примечание. Данный проигрыватель поддерживает воспроизведение только
файлов AVI. Для просмотра видеофайлов других форматов воспользуйтесь
инструментом преобразования, имеющимся на компакт-диске с драйверами для
преобразования этих видеофайлов. Подробнее об инструменте преобразования см.
"Краткое руководство пользователя преобразователя AVI" на компакт-диске.
одну из строк меню и нажмите кнопку "Вход/Выход" для подтверждения
выбора. Закладка сохранена. Она начинается с первой строки текущей
страницы.
(4) Для чтения отмеченной страницы нажмите и сразу отпустите кнопку "VOL" для
отображения окна “Load Bookmark” (Загрузить закладку). Выберите закладку и
нажмите кнопку "Вход/Выход" для подтверждения выбора. Отображается
соответствующая страница.
Примечание. Некоторые файлы TXT могут не читаться. Причина может состоять в
том, что их формат не поддерживается. Пропустите такой файл или загрузите
другой файл.
пункт “YES” (ДА) и нажмите кнопку "Вход/Выход" для подтверждения.
Стр. 8 из 14 RU
Page 94
13. Игра
В данном проигрывателе присутствует популярная и веселая игра — "Tetris World".
Для запуска игры в основном меню выберите пункт “Game” (Игра) и нажмите кнопку
"МЕНЮ" для входа в игровой режим. Ниже перечислены базовые операции:
Запуск игры
Нажмите кнопку "ВОСПРОИЗВЕДЕНИЕ/ПАУЗА"
Перемещение блока влево или вправо
Нажимайте кнопку "ПРЕДЫДУЩАЯ ДОРОЖКА" и "СЛЕДУЮЩАЯ ДОРОЖКА"
Вращение блока
Нажмите кнопку "Вход/Выход"
Вставка блока
Нажмите кнопку "VOL-"
Выход из игры
Нажмите кнопку воспроизведения для приостановки игры и удерживайте эту кнопку
ажатой, затем нажмите кнопку "Вход/Выход"
Blight Mode (Режимподсветки)
Normal (Обычный)
Power Save (Экономичный) (Экранвыключается, еслиустройствонеиспользуется
в течение определенного времени)
System (Система)
About (Сведения): Информацияобустройстве
Upgrade (Обновление): Обновлениемикропрограммы
Default Set (Настройкапоумолчанию): Восстановление настройки проигрывателя
по умолчанию
Стр. 10 из 14 RU
Page 96
Power Off (Выключениепитания)
(Задание времени непрерывного воспроизведения, после которого проигрыватель
автоматически выключается.)