IntelliTrac
SPT1 Personal Tracking System
User Manual
General Notes
With respect to any damages arising in operation with the described product of this document,
Liberty Technology Pty. Ltd. shall be liable to the general terms and conditions on which the delivery
of the described product and this document are based.
This product is not intended for use in life support appliances, devices or systems where a
malfunction of the product can be reasonably expected to result in personal injury. Liberty
Technology Pty. Ltd. customers using or selling this product for such use in such applications do so
at their own risk and agree to fully indemnify Liberty Technology Pty. Ltd. for any damages resulting
from illegal use or resale.
Users should be aware and comply with the Privacy Act as stipulated under Australian Law in
reference to surveillance and tracking systems. Liberty Technology will not be held liable for any
damages or claims as a result of breaches of these laws. Liberty Technology Pty. Ltd. customers
using or selling this product for such use in such applications do so at their own risk and agree to
fully indemnify Liberty Technology Pty. Ltd. for any damages resulting from illegal use or resale.
Information in this document is subject to change without notice at any time.
Copyright Notice
Copying of this document and or related software and giving it to others and the use of
communication of the contents thereof, are forbidden without any express authority. Offenders are
liable for the payment of any damages arising.
Copyright Liberty Technology Pty. Ltd. 2005. All Rights Reserved.
Device Information
Device Electronic ID:‐ 101______________
Device Password:__ __ __ __ Sim Pin Lock: __ __ __ __
Pre Programmed Speed Dials: Pre Programmed SMS
1.____________________ 1.______________________
2.____________________ 2.______________________
3.____________________ 3.______________________
4.______________________
5.______________________
1. Kit Contents
Upon opening the contents of your IntelliTrac SPT1 please ensure the following GPS
Tracking Device and accessories have been received.
IntelliTrac SPT1 Personal Tracking System
240V Plug Pack Charger
Car Charger
USB Car Charger and Programing Cable
• Special Sales Offers may also include
o Lanyard
o Nylon Carry Case
2. Introduction of Features
The IntelliTrac SPT1 combines State Of The Art GPS tracking technology with GSM Digital
Mobile Phone SMS communications to provide an effective system for monitoring the
locations of persons anywhere on the globe where there is GSM Mobile Phone Coverage.
The SPT1 provides and avergae positioning accurancy of 5 metres.
This User Guide describes the basic operation of the device.
3. Charging the SPT1
Prior to first use, please charge the IntelliTrac SPT1 for 8 hours. Charging is via the Mini
USB plug at the bottom of the SPT1. You may charge the device using the included plug
pack or car charger. When the SPT1 is charging, the battery icon on the LCD screen will
flash.
To ensure reliable operation it is adviseable to charge the device overnight prior to daily
use.
4. Inserting the SIM Card
Switch off the SPT1, then insert a GSM Mobile Phone SIM Card into the SPT1. (Note the
angle on the SIM Card in the diagram below). Then switch on the SPT1
If the SIM Card is PIN Locked. The following message may
occur. The SPT1 must be preprogrammed to accept the
SIM Code Pin Number. If this message occurs please
remove the SIM Pin Lock from your SIM Card.
If the SIM Card is not inserted or inserted incorrectly the
following error message will appear on the LCD Screen
5. Turning On The SPT1
To the turn SPT1 ON and OFF ‐ Press the Power Button continuously for 3 seconds. A
startup and shutdown tone will be heard. The following will be displayed on the LCD
Screen.
Press the Power Button again for 1 second.
The LCD Screen display will change
Press the Power Button again for 1 second.
The LCD Screen display will change
Press the Power Button again for 1 second to return to the original display.
6. Answering Incoming Calls
Press any of the following keys to answer incoming telephone calls.
7. Rejecting Incoming Calls or Hanging Up
Press the following key to Reject Incoming Calls or Hang Up a phone call.
8. Adjusting Volume of Voice Calls
Press to increase volume during a call
Press to decrease volume during a call
9. Speed Dial Voice Call Buttons
The following buttons may be pressed to dial 3 pre‐programmed speed dial numbers
These numbers must be pre programmed at the time of purchase. If you require these
numbers to be changed please contact IntelliTrac. If a speed dial button is pressed which
has not been programmed, the following message will be displayed
10. SOS Emergency Alert
Press the SOS Button continously for 5 seconds to send SMS Alerts to up to 5 pre
programmed mobile phone numbers.
The following message will be displayed on the receiver’s mobile phone.
Note:A Valid Position require 3 or more satellites
To display the position, go to www.intellitrac.com.au select GPS MAPS. Enter the
longitude and latitude into the web site and the position will be plotted.
11. Movement Alert
The SPT1 provides a function which can detect the unauthorized movement after
enabling the “Park” function. The device is able to send a message an SMS alert to
assigned contact phone numbers once this event is detected and triggered.
Enable/disable the Park function:
Under the “Normal Mode”, press and hold
“Park” function.
If the “Park” function is enabled, the LCD screen shows the “Parking Enabled”
message in the center of screen. See Below
1. The “Park Function”will be activated after 180 seconds
2. The “Park Function” must be disabled within one minute of movement otherwise SMS
Movement Alert Messages will be sent to the assigned contact phone numbers.
for 3 seconds to enable/disable the
The Message Format is as follows
Note:A Valid Position require 3 or more satellites
See section 10 on how to plot this latitude and longitude position on a map
12. Locating the SPT1
The SPT1 may be located by simply sending the following SMS to the device from your
mobile phone.
Please note 0000 represents the device password which was nominated at the time of purchase.
The SPT1 will respond by returning the following SMS to your mobile phone. (Please ensure caller
ID is activated on your mobile phone, otherwise the SPT1 will not know where to send its reply)
Whereis0000
Tracking Report
Unit ID:101XXXXXXXXX
Date/Time:XXXXXXXXXXXX
Lon:XXX.XXXXXXX
Lat:XXX.XXXXXXXX
Speed:X XX km/h
Satellites: XX
Note:A Valid Position require 3 or more satellites
See section 10 on how to plot this latitude and longitude position on a map
13. Voice Tapping the SPT1
In cases where the SPT1 owner is unable to answer a voice call, you may send an SMS to
the SPT1 and it will return dial your mobile phone, therefore allowing you to listen into
potentially dangerous situations.
$WP+VWT=0000,XXXXXXXXXX
Please note 0000 represents the device password which was nominated at the time of purchase.
xxxxxxxxxx is the number you wish for the SPT1 to return dial.
14. Adjusting Time Display
The SPT1 time is derived from the GPS Satellite System and must be adjusted from GMT Time. For
Example Australian Eastern Standard Time is GMT+10, Australian Eastern Daylight Savings Time is
GMT+11
To adjust the time zone setting send the following SMS to the SPT1
$WP+SETTZ=0000,+,hour, minute
For Example Australian Eastern Standard Time is $WP+SETTZ=0000,+,10,00
Please note 0000 represents the device password which was nominated at the time of purchase.
Loading...