POWER SUPPLY
TELEPHONE
TELEPHONE CORD
HANDS-FREE
HANDS-FREE HANDS-FREE
SET-UP
STEP 1
Plug-in & Connect
Plug power adapter from wall outlet
into XLink
Connect suppor t stand to XLink
Plug telephone co rd from main home
telephone into X Link
Pair Cellular Phone to XLink
STEP 2
Ready for Pairing
Select line [ •], [••], or [• ••] on XLi nk
Press and hold dow n
button for selec ted
line until blue button
light blinks qu ickly
Typical Pairing
- Select “Hands Free”
- Select “Look For Devices”
- Select “XLink Gatewa y”
- Select “Yes” and pair with XLink
- Enter password “1234”
- Press “OK”
Enable your Blue Tooth function on your
cellular phone (refer to your cellular
phone’s manual if necessa ry) steps may
dier per mode l
STEP 3
YOUR
CONNECTED!
YOUR
CONNECTED!
Blue light stops blinking and remain s on
when cellular a nd selected XLink lin e are
paired successful ly
Enter password “1234” into your cellu lar
phone.
Press OK
ITC-BT
QUICKSTART GUIDE
Bluetooth Cellul ar Gateway
_
Bluetooth enabled cellular phone required
_
XLink can be placed upright with stand or lay at
_
Pair up to 3 cellular phones to your XLink
Each line [•], [•• ], or [•• •] pairs to one cellular phone
_
Once paired, your cellular phone and your XLink will
automatically connect via Bluetooth when in range
_
To disconnect your cellular phone from XLink simply
press the blue appropriate line button
_
To re-connect your cellular phone to XLink on the same
line, simply press the same button and the light will
return to steady blue
_
XLink ITC-BT is designed to work with your standard
phone independently of your telephone service
NOTES
TELEPHONE CORD
CONNECTION
(to main home phon e)
LINE #1
POWER
INDICATOR
LINE #2
•
••
•••
LINE #3
POWER ADAPTER
CONNECTION
USB CONNECTIO N
OUTLETS
ITC-BT
Made in China
Copyright © IntelliTouch
XLink is a registered
Trademark of IntelliTouch.
All rights reserved.
For customer service contact
your point of sale or visit:
www.intellitouch.com
IntelliTouch
San Diego CA, 92121
POWER SUPPLY
TELEPHONE
TELEPHONE CORD
HANDS-FREE
HANDS-FREE HANDS-FREE
SET-UP
STEP 1
Plug-in & Connect
Plug power adapter from wall outlet
into XLink
Connect suppor t stand to XLink
Plug telephone co rd from main home
telephone into X Link
Pair Cellular Phone to XLink
STEP 2
Ready for Pairing
Select line [ •], [••], or [• ••] on XLi nk
Press and hold dow n
button for selec ted
line until blue button
light blinks qu ickly
Typical Pairing
- Select “Hands Free”
- Select “Look For Devices”
- Select “XLink Gatewa y”
- Select “Yes” and pair with XLink
- Enter password “1234”
- Press “OK”
Enable your Blue Tooth function on your
cellular phone (refer to your cellular
phone’s manual if necessa ry) steps may
dier per mode l
STEP 3
YOUR
CONNECTED!
YOUR
CONNECTED!
Blue light stops blinking and remain s on
when cellular a nd selected XLink lin e are
paired successful ly
Enter password “1234” into your cellu lar
phone.
Press OK
Loading...