Intellinet 711937, 711951, 711869, 711722, 711944 ASSEMBLY INSTRUCTIONS
...
SE WALL BOX MANUAL ASSEMBIY
Packing list
①---Front door---1pc
②--- Front frame---1pc
③--- Side frame---2pcs
④--- Side panel---2pcs
⑤-- To p---1pc
⑥--- Back frame---1pc
⑦---19”mounting rails ---2pcs
⑧-- Bottom---1pc
⑨--- Package of accessories
Item list of accessories package
M5X10 self-tapping screws---
10pcs
M6X12 screws ---
21U& More than12U,12pcs
less than21U, 8pcs
M6X12 screws&square
nuts---
12U& less than12U,10SET
More than12U, 20SET
Tip：Check the quantities of the items
after open package, ensure the
quantities is right to improve the
assembly efficiency.
ATTENTION:
please rem ove front/back door and
side plane from the fram e prior to
SE WALL BOX MANUAL ASSEMBIY
Packing list
①---Front door---1pc
②--- Front frame---1pc
③--- Side frame---2pcs
④--- Side panel---2pcs
⑤-- To p---1pc
⑥--- Back fram e---1pc
⑦---19”mounting rails ---2pcs
⑧-- Bottom---1pc
⑨--- Package of accessories
Item list of accessories package
M5X10 self-tapping screws---
10pcs
M6X12 screws ---
21U& More than12U,12pcs
less than21U, 8pcs
M6X12 screws&square
nuts---
12U& less than12U,10SET
More than12U, 20SET
Tip：Check the quantities of the items
after open package, ensure the
quantities is right to improve the
assembly efficiency.
ATTENTION:
please remove front/back door and
side plane from the frame prior to
unpacking
【1】
Remove
from
, put them
2】Open the front door by key, pull the door
3】Fix 19” mounting rails to the first holes of
【4】
Install side frames to the grooves of back
【5】
I
nstall top and bottom as shown by
6】
Install front frame by 4pcs of
19” FLAT PACK
SE WALL BOX MANUAL ASSEMBIY
Packing list
①---Front door---1pc
②--- Front frame---1pc
③--- Side frame---2pcs
④--- Side panel---2pcs
⑤-- To p---1pc
⑥--- Back fram e---1pc
⑦---19”mounting rails ---2pcs
⑧-- Bottom---1pc
⑨--- Package of accessories
Item list of accessories package
M5X10 self-tapping screws---
10pcs
M6X12 screws ---
21U& More than12U,12pcs
less than21U, 8pcs
M6X12 screws&square
nuts---
12U& less than12U,10SET
More than12U, 20SET
Tip：Check the quantities of the items
after open package, ensure the
quantities is right to improve the
assembly efficiency.
ATTENTION:
please remove front/back door and
side plane from the frame prior to
unpacking
【1】
Remove
⑦
from
②
, put them
separate for the preparation of the
fr am e as sem bly
.
【2】
Open the front door by key, pull the door
latch downward, refer to the picture, remove
the front door from front frame, put them
separate for the preparation of the fram e
assembly.
【3】
Fix 19” mounting rails to the first holes of
top & bottom of side frames by 4sets of M5
screws.
【4】
Install side frames to the grooves of back
frame by 4pcs of M6*12 screws (6pcs if more than
18U) as shown by the arrow in the picture, note 19”
mounting rails are in the front side.
【5】
I
nstall top and bottom as shown by
the arrow in the picture.
Tip：Please note the direction when install
bottom, screws will be in the front side,
please refer to picture.
【
6】
Install front frame by 4pcs of
M6*12 screws (6pcs of M6*12 screws if
more than 18U), refer to the picture.
Install side panels, refer to the
【8】
Repetition step 2, install
M6
Attentio n:
screws be
in the f ront side
M6
RACK CABINET
ASSEMBLY
INSTRUCTIONS
1 Front door
2 Front frame
3 Side frame x2
4 Side panel x2
5 Top
6 Back frame
7 Mounting rail x2
8 Bottom
Remove the side panels (4) from the side
1
frames (3) and set them aside.
separate for the preparation of the
fr am e as sem bly
Use 4 of the included M6 screws (use 6 for
4
larger units) to attach each of the 2 side
frame by 4pcs of M6*12 screws (6pcs if more than
18U) as shown by the arrow in the picture, note 19”
frames (3) to the back frame (6).
mounting rails are in the front side.
⑦
.
②
M6
7
Wallmount Cabinet instructions ICG.indd 1 7/30/14 2:22 PM
Install the 2 side panels (4).
【7】
picture
© IC Intracom. All rights reserved. Intellinet is a trademark of IC Intracom, registered in the U.S. and other countries. For specifications, go to intellinet-network.com. For warranty information, go to intellinet-network.com/warranty.
【
Use the included key to pull open the
2
latch downward, refer to the picture, remove
door (1) and remove it from the front
the front door from front frame, put them
frame (2) by pushing down on the latch.
separate for the preparation of the fram e
assembly.
Slide the top (5) and the bottom (8) into
5
the arrow in the picture.
place.
Tip：Please note the direction when install
bottom, screws will be in the front side,
please refer to picture.
Attentio n:
Note: screws
screws be
to the front
in the f ront side
【
Use the 4 included M5 screws to attach a
3
top & bottom of side frames by 4sets of M5
mounting rail (7) to each side frame (3).
screws.
Use 4 of the included M6 screws (use 6 for
6
【
larger units) to attach the front frame (2)
M6*12 screws (6pcs of M6*12 screws if
to the assembly.
more than 18U), refer to the picture.
Reverse Step 2 by inserting the lower
8
door latch into the frame and then
pushing down on the upper door latch
to install the front door (1). Note: Once
the unit is assembled, check that all
corners are square to ensure that the
door opens and closes properly.
M6
front door.
Tip: SE enclosure is the bolted
structure, need to adjust the
diagonal size of enclosure after
the assembly, ensure
homogeneous space for all
doors and doors work well.
North & Sou th Americ a
IC Intracom Americas
550 Commerce Blvd.
Oldsmar, FL 34677
USA
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist. , New Taipei Cit y 221
Asia & Afric a
IC Intracom A sia
Taiw an
Europe
IC Intracom Europe
Löhbacher St r. 7
D-58553 Halver
Germany
SE WALL BOX MANUAL ASSEMBIY
Packing list
①---Front door---1pc
②--- Front frame---1pc
③--- Side frame---2pcs
④--- Side panel---2pcs
⑤-- To p---1pc
⑥--- Back frame---1pc
⑦---19”mounting rails ---2pcs
⑧-- Bottom---1pc
⑨--- Package of accessories
Item list of accessories package
M5X10 self-tapping screws---
10pcs
M6X12 screws ---
21U& More than12U,12pcs
less than21U, 8pcs
M6X12 screws&square
nuts---
12U& less than12U,10SET
More than12U, 20SET
Tip：Check the quantities of the items
after open package, ensure the
quantities is right to improve the
assembly efficiency.
ATTENTION:
please rem ove front/back door and
side plane from the fram e prior to
SE WALL BOX MANUAL ASSEMBIY
Packing list
①---Front door---1pc
②--- Front frame---1pc
③--- Side frame---2pcs
④--- Side panel---2pcs
⑤-- To p---1pc
⑥--- Back fram e---1pc
⑦---19”mounting rails ---2pcs
⑧-- Bottom---1pc
⑨--- Package of accessories
Item list of accessories package
M5X10 self-tapping screws---
10pcs
M6X12 screws ---
21U& More than12U,12pcs
less than21U, 8pcs
M6X12 screws&square
nuts---
12U& less than12U,10SET
More than12U, 20SET
Tip：Check the quantities of the items
after open package, ensure the
quantities is right to improve the
assembly efficiency.
ATTENTION:
please remove front/back door and
side plane from the frame prior to
unpacking
Remove
from
, put them
2】Open the front door by key, pull the door
3】Fix 19” mounting rails to the first holes of
【4】
Install side frames to the grooves of back
【5】
I
nstall top and bottom as shown by
6】
Install front frame by 4pcs of
19” FLAT PACK
SE WALL BOX MANUAL ASSEMBIY
Packing list
①---Front door---1pc
②--- Front frame---1pc
③--- Side frame---2pcs
④--- Side panel---2pcs
⑤-- To p---1pc
⑥--- Back fram e---1pc
⑦---19”mounting rails ---2pcs
⑧-- Bottom---1pc
⑨--- Package of accessories
Item list of accessories package
M5X10 self-tapping screws---
10pcs
M6X12 screws ---
21U& More than12U,12pcs
less than21U, 8pcs
M6X12 screws&square
nuts---
12U& less than12U,10SET
More than12U, 20SET
Tip：Check the quantities of the items
after open package, ensure the
quantities is right to improve the
assembly efficiency.
ATTENTION:
please remove front/back door and
side plane from the frame prior to
unpacking
【1】
Remove
⑦
from
②
, put them
separate for the preparation of the
fr am e as sem bly
.
【2】
Open the front door by key, pull the door
latch downward, refer to the picture, remove
the front door from front frame, put them
separate for the preparation of the fram e
assembly.
【3】
Fix 19” mounting rails to the first holes of
top & bottom of side frames by 4sets of M5
screws.
【4】
Install side frames to the grooves of back
frame by 4pcs of M6*12 screws (6pcs if more than
18U) as shown by the arrow in the picture, note 19”
mounting rails are in the front side.
【5】
I
nstall top and bottom as shown by
the arrow in the picture.
Tip：Please note the direction when install
bottom, screws will be in the front side,
please refer to picture.
【
6】
Install front frame by 4pcs of
M6*12 screws (6pcs of M6*12 screws if
more than 18U), refer to the picture.
Install side panels, refer to the
【8】
Repetition step 2, install
M6
Attentio n:
screws be
in the f ront side
M6
WANDVERTEILER
MONTAGEANLEITUNG
1 Fronttür
2 Frontrahmen
3 Seitenrahmen x2
4 Seitenwand x2
5 Oberseite
6 Rückseitiger Rahmen
7 Montageschienen x2
8 Bodenplatte
Nehmen Sie die Seitenwände (4) vom
1
【1】
Seitenrahmen (3) ab und legen Sie sie zur
separate for the preparation of the
fr am e as sem bly
Seite.
Verwenden Sie 4 beiliegende M6-Schrauben
4
(6 für größere Schränke), um die beiden
frame by 4pcs of M6*12 screws (6pcs if more than
Seitenrahmen (3) jeweils am rückseitigen
18U) as shown by the arrow in the picture, note 19”
mounting rails are in the front side.
Rahmen (6) zu befestigen.
⑦
.
②
M6
7
Wallmount Cabinet instructions ICG.indd 2 7/30/14 2:22 PM
Montieren Sie die 2 Seitenwände (4).
【7】
picture
Die Spezifikationen finden Sie auf intellinet-network.com.. Garantieinformationen finden Sie hier unter intellinet-network.com/warranty.
【
Öffnen Sie die Tür (1) mit dem
2
latch downward, refer to the picture, remove
beiliegenden Schlüssel und nehmen Sie
the front door from front frame, put them
sie vom Frontrahmen (2) ab, indem Sie
separate for the preparation of the fram e
assembly.
den Scharnierstift nach unten drücken.
Schieben Sie die Oberseite (5) und die
5
the arrow in the picture.
Bodenplatte (8) in Position.
Tip：Please note the direction when install
bottom, screws will be in the front side,
please refer to picture.
Attentio n:
Hinweis:
screws be
Schrauben
in the f ront side
nach vorn
【
Verwenden Sie 4 beiliegende M5-
3
top & bottom of side frames by 4sets of M5
Schrauben, um eine Montageschiene (7)
screws.
an jedem Seitenrahmen (3) zu befestigen.
Verwenden Sie 4 beiliegende M6-
6
【
Schrauben (6 für größere Schränke), um
M6*12 screws (6pcs of M6*12 screws if
den Frontrahmen (2) an der Konstruktion
more than 18U), refer to the picture.
zu befestigen.
Setzen Sie die Tür (1) aus Schritt 2
8
wieder ein, indem Sie den unteren
Scharnierstift unten im Rahmen platzieren und den oberen an der Oberseite
einsetzen. Hinweis: Sobald der Schrank
montiert ist, prüfen Sie, dass alle Ecken
genau rechtwinklig verbaut sind, damit
die Tür ordnungsgemäß geöffnet und
geschlossen werden kann.
M6
front door.
Tip: SE enclosure is the bolted
structure, need to adjust the
diagonal size of enclosure after
the assembly, ensure
homogeneous space for all
doors and doors work well.
Loading...