Intellinet 561358 User Manual

8-Port Fast Ethernet PoE+ Web-Smart Switch with
1 Gigabit Combo Port

8 x PoE ports, IEEE 802.3at/af Power-over-Ethernet (PoE+/PoE), 1 x SFP/RJ45
Combo, Endspan, Desktop, 19" Rackmount
Part No.: 561358

The perfect solution to connect up to eight PoE-enabled network cameras to your NVR!

The Intellinet 8-Port Fast Ethernet PoE+ Web-Smart Switch with 1 Gigabit Combo Port
(561358) is designed to pass both data and electrical power to a number of
PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight
Gigabit Ethernet ports (all of which support 802.3at/af PoE/PoE+), this switch can power
wireless LAN access points and bridges, VoIP phones, IP video cameras and more while
delivering network speeds of up to 1000 Mbps.

Power over Ethernet 802.3at

The Intellinet 8-Port Fast Ethernet PoE+ Web-Smart Switch with 1 Gigabit Combo Port (561358) supports the IEEE

802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant
devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring
and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and
walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage
protection function, your equipment is well protected. For devices that are not 802.3at/af compliant (legacy wireless
access points or network cameras), we suggest using an Intellinet PoE/PoE+ Splitter.

Web Management

This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full
control over your network. The switch supports VLAN, port aggregation, QoS and port mirroring — just to name a few.
The switch offers an impressive array of PoE-related management features as well such as a scheduler or a PoE Power
Delay function, which allows you to program a startup sequence for your PoE-compliant devices and eliminate potential
problems caused by the increased power draw at startup. The sequential power-up guarantees a smooth startup
procedure for all connected networking devices (i.e., your PoE-enabled network cameras).

Gigabit Uplink

The Intellinet 8-Port Fast Ethernet PoE+ Web-Smart model (561358) is equipped with one 1-Gigabit combo port.
Available as both an on-board RJ45 port and an optional SFP transceiver module slot, the Gigabit uplink port is ideal to
connect the switch to the network's backbone, a server or, perhaps, your video recording solution (NVR).

* Total PoE budget for this switch is 130 watts. Per-port average power distribution is 16.25 watts; maximum per-port
power usage cannot exceed 30 watts.

Features:

Provides power and data connection for up to eight PoE network devices
The ideal solution for connecting PoE-enabled surveillance cameras to an NVR at
Gigabit speeds

All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and

For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.

reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.

For use on desktop or mounted in standard 19" rack
Eight 10/100 Mbps IEEE 802.3at/af-compliant RJ45 PoE ports and 1 Gigabit combo
port
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access
points, VoIP phones, IP cameras)
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage
protection
Power output up to 30 watts per port*
PoE power budget of 130 watts

3.6 Gbps switch fabric
PoE Management - PoE port settings, schedule and power-on delay
Supports VLAN, QoS, bandwidth control per port
IGMP Snooping for multicast filtering
Broadcast storm control and Port mirroring
Supports VLAN (tag-based and port-based) with VLAN pass-through
Supports Spanning Tree protocol
QoS (Quality of Service) bandwidth management
LACP Link Aggregation
Supports bandwidth control per port
Web-based configuration
11" metal housing
Includes 19" rackmount brackets
Three-Year Warranty

Specifications:

Standards

• IEEE 802.1d (Spanning Tree Protocol)

• IEEE 802.1p (Traffic Prioritization)

• IEEE 802.1q (VLAN Tagging)

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3ab (Twisted Pair Gigabit Ethernet)

• IEEE 802.3ad (Link Aggregation Control Protocol LACP)

• IEEE 802.3af (Power over Ethernet 802.3at Type 1)

• IEEE 802.3at (Power over Ethernet 802.3at Type 2)

• IEEE 802.3u (100Base-TX Fast Ethernet)

• IEEE 802.3x (flow control, for full duplex mode)

General

• Media support:

- 10Base-T Cat3, 4, 5 UTP/STP RJ45

- 100Base-TX Cat5 UTP/STP RJ45

• MAC address table: 4k

• Buffer memory: 352 kB

• Backplane speed / switch fabric: 3.6 Gbps

• Switch architecture: store and forward

• Configuration options:

All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and

For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.

reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.