Intellinet 561266 User Manual

2-Port Gigabit High-Power PoE+ Extender
Repeater

IEEE 802.3at/af Compliant Range Extender, 100 m (328 ft.) Additional Range, 2 PSE
Ports, Metal
Part No.: 561266

Extend the range of a PoE connection.

The Intellinet Network Solutions 2-Port Gigabit High-Power PoE+ Extender Repeater
extends connection distances from a PoE source to two output devices up to 100 m (328
ft.) via Cat5e or Cat6 cable. The PoE+ extender does not need any additional power
supply, as it draws the power it needs from the PoE input.

Reduce Wiring Costs

Avoid the expense of running AC power lines for your wireless access point, network
camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the
existing Cat5e/6/6a cabling to deliver DC power as well as transfer data.

Power over Ethernet 802.3at Compliant

The Intellinet Network Solutions 2-Port Gigabit High-Power PoE+ Extender Repeater
supports the IEEE 802.3at protocol. The repeater forwards data at Gigabit speeds and
offers up to 30 watts of input power to a connected IEEE 802.3af- or IEEE

802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.),
bringing the total distance between PoE source and device to 200 m (656 ft.).

Simple Installation

Simply connect the "PoE In" port with your PoE injector or PoE switch, and

All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and

For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.

reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.

connect the "PoE Out" ports with the PoE devices that you wish to connect
(e.g., a VoIP phone and a PoE network camera). That's it. This product was designed to be
as easy as possible to set up and use.

Features:

Connects and powers two PoE devices such as network cameras, Wireless Access
Points or VoIP phones from one PoE injector or PoE switch PSE port
Doubles the connection distance between PoE source and device from 100 m (328 ft.)
to 200 m (656 ft.)
Saves time and money by delivering data and power via existing network cables
Supports 10/100/1000 Mbps data rates and delivers up to 25 W to connected PoE
devices
PoE awareness ensures that power is only sent to IEEE 802.3af/at-compliant devices;
non-PoE devices only receive data
Requires no additional power supply; draws power directly from the PoE input
Compatible with IEEE 802.3at/af-compliant PoE injectors and PoE switches (PSE)
Compatible with IEEE 802.3at/af-compliant powered devices (PD)
PoE-Powered 3-Port Gigabit Switch with PoE Passthrough
6 Gbps switch fabric
Supports jumbo frames up to 9 kBytes
Supports 2048 MAC address entries
LEDs for PoE and data
Fanless design ideal for silent operation
Compact metal case
Three-Year Warranty

Specifications:

Standards

• IEEE 802.3af (Power over Ethernet)

• IEEE 802.3at (High-Power PoE+ Power over Ethernet)

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3ab (Gigabit Ethernet)

• IEEE 802.3u (100Base-TX Fast Ethernet)

General

• Media support:

- 100Base-TX Cat5 UTP/STP RJ45, 8 pin

- 1000Base-T Cat5e UTP/STP RJ45, 8 pin

• Ports:

- One RJ45 10/100/1000 Mbps input port for 48V IEEE 802.3af/at-compliant signal

- Two RJ45 10/100/1000 Mbps PoE output ports

• MAC address table: 2048 entries

• Buffer memory: 256 kB

All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and

For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.

reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.