Intellinet 561051 User Manual

8-Port Gigabit Ethernet PoE+ Web-Managed
Switch with 2 SFP Ports

8 x PoE ports, IEEE 802.3at/af Power-over-Ethernet (PoE+/PoE), 2 x SFP, Endspan,
Desktop, 19" Rackmount
Part No.: 561051

Save installation time and money with PoE.

The Intellinet 8-Port Gigabit Ethernet PoE+ Web-Managed Switch (561051) is designed to
pass both data and electrical power to a number of PoE-compatible devices via standard
Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports (all of which
support 802.3at/af PoE/PoE+), this switch can power wireless LAN access points and
bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to
1000 Mbps.

Power over Ethernet 802.3at

The Intellinet 8-Port Gigabit Ethernet PoE+ Web-Managed Switch supports the IEEE 802.3at protocol and is designed to
inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no
additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused
by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is
supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well protected.
For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an
Intellinet PoE/PoE+ Splitter.

Web Management

This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full
control over your network. The 8-Port Gigabit Ethernet PoE+ Web-Managed Switch supports VLAN, port aggregation,
QoS and port mirroring, and supports SNMP V1 and the popular V2c — just to name a few.

Eliminate Bottlenecks with a total of 10 Gigabit Ports

Equipped with eight auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance
for your computers, servers and other networking devices. in addition, two small form-factor pluggable GBIC module slots
(SFP) provide fiber connectivity for greater distances. These are not shared combo-ports, but true Gigabit ports, pushing
the total available bandwidth up to 20 Gbps.

* Total PoE budget for this switch is 140 watts. Per-port average power distribution is 17.5 watts; maximum per-port
power usage cannot exceed 30 watts.

Features:

Provides power and data connection for up to eight PoE network devices
Save time and money by delivering data and power via existing network cables
For use on desktop or mounted in standard 19" rack

All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and

For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.

reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.

10/100/1000 auto-sensing ports automatically detect optimal network speeds
Two small form-factor pluggable GBIC module slots (SFP)
IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
Power output up to 30 watts per port*
PoE power budget of 140 watts
20 Gbps switch fabric
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access
points, VoIP phones, IP cameras)
Green Ethernet power-saving technology deactivates unused ports and adjusts power
levels based on the cable length
Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage
protection
All RJ45 ports with Auto-MDIX (auto uplink) support
Web-based configuration
Supports SNMP management
SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9
Supports VLAN (tag-based and port-based)
Supports link aggregation (trunking)
Supports port mirroring
Supports three types of QoS: CoS (802.1p), DSCP and IP precedence
Broadcast storm control with multicast packet rate settings
Store and forward switching architecture
Supports jumbo frames up to 9 kBytes
Supports Rapid Spanning Tree/Spanning Tree protocol
IEEE 802.3x flow control for full duplex
Supports 8k MAC address entries
512 kBytes buffer memory
Desktop-size metal case
Fanless design ideal for silent operation
Includes 19" rackmount brackets
Three-Year Warranty

Specifications:

Standards

• IEEE 802.1d (Spanning Tree Protocol)

• IEEE 802.1p (Traffic Prioritization)

• IEEE 802.1q (VLAN Tagging)

• IEEE 802.1w (Rapid Spanning Tree Protocol)

• IEEE 802.3ad (Link Aggregation)

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3ab (Twisted Pair Gigabit Ethernet)

• IEEE 802.3ad (Link Aggregation Control Protocol LACP)

• IEEE 802.3af (Power over Ethernet 802.3at Type 1)

• IEEE 802.3at (Power over Ethernet 802.3at Type 2)

• IEEE 802.3u (100Base-TX Fast Ethernet)

All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and

For more information on Intellinet products, consult your local dealer or visit www.intelllinet-network.com.

reproduction of this document, and use and disclosure of the contents herein, are prohibited unless specifically authorized.