Intellinet 523813, 523820 User Manual

FAST ETHERNET
WEB-SMART
SWITCH

USER
MANUAL

Models 523813
& 523820

INT-523813/523820-UM-0607-01

INTRODUCTION

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™
Fast Ethernet Web-Smart Switch (6 RJ-45 10/100 + 2 Fiber SC
100Base-FX Multi-Mode Ports, Model 523813 or 6 RJ-45 10/100 + 2
Fiber SC 100Base-FX Single-Mode Ports, Model 523820).

The easy-to-follow instructions in this user manual help make setup
and operation quick and simple, so you’ll also soon be enjoying the
benets of these popular features:

• Six 10/100 Mbps auto-sensing Auto-MDIX RJ-45 ports automatically
detecting optimal network speeds

• Two 100Base-FX multi-mode (Model 523813) or single-mode (Model

523820) Fiber SC duplex ports

• Fiber distance support: up to 2 km (62.5/125 or 50/125 µm cable)

• Conguration via Web browser

• Supports NWay Auto-Negotiation

• Store and forward switching architecture

• Full/half duplex operation

• IEEE 802.3x ow control for full duplex

• Zero packet loss back-pressure ow control for half duplex

• Packet ltering/forwarding rates: 148,800 pps (100 Mbps), 14,880 pps

(10 Mbps)

• Supports port-based VLAN, 4 groups

• Supports three types of QoS: port-based, 802.1p and DiffServ

• Supports Spanning Tree protocol

• Bandwidth control for all ports with 8 levels

• Broadcast storm control

• Supports MAC address port security

• Supports user-dened maximum forwarding packet size (1536 or 1552)

• Supports up to 1024 MAC address entries

• 128 kBytes buffer memory

• Lifetime Warranty

2

3

FCC Warning

This device has been tested and found to comply with limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These specications
are designed to provide reasonable protection against interference with
radios and TVs in a residential installation. However, there is no guarantee

that interference will not occur in a particular installation. If interference

does occur, the following measures are suggested to rectify the problem:

• Move the device away from affected radios or TVs

• Plug the device into a different electrical outlet

• Discuss the problem with a qualied radio/TV technician

CE Mark Warning

This is a Class B product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to
take adequate measures.

SETUP/INSTALLATION

Ports & Indicators

Six RJ-45 ports (1–6) and two Fiber ports (7–8) on the front panel connect

to servers, workstations or other devices. Any port can be an uplink

port shared with another hub or switch to expand and share the same
function. Corresponding LEDs light green to indicate power to a port.

The AC power outlet is located on the rear panel.

RJ-45
ports

LED

display

Fiber
ports