Intellinet 520959 Quick Start Manual

INT-PATPAN-QSG-1106-03

Patch Panel

QUIcK StaRt
GUIDe

2

Thank you for purchasing this INTELLINET NETWORK SOLUTIONS™ 19" Patch Panel, one of a
series of easy-to-use panels that let you consolidate your network cables to reduce clutter.

Whether you have selected a model for use with Cat5e or Cat6 cables, unshielded twisted pair
(UTP) or fully shielded, from 12-port to 96-port, you’ll appreciate the benefits of convenience and
reliability delivered by these quality features.

• Solid and reliable terminations for copper cabling featuring a minimum of 3 mm 50 micro-inch

gold-plated jack contacts

• Compatible with both 110 and Krone punch-down tools

• Supports 22 to 26 AWG stranded and solid wire

• Cat6 performance (if applicable) is in compliance with the ANSI/TIA/EIA 568 B.2-1 standard

• Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applications

• Connects RJ-45 ports to a network

• Meets 19” rackmount standards

• Lifetime Warranty

The images on the following pages of this guide show you the basic installation procedures for
connecting your patch panel to your computer cables.
NOTE: The images on the following pages are representative of all the variously sized (based on
the number of connector ports) patch panels in this INTELLINET NETWORK SOLUTIONS series.

3

Front view

Rear view

NOTE: These images are representational of this particular
series of INTELLINET NETWORK SOLUTIONS patch panels
and show the basic design of each model.