Page 1
Fast Ethernet
WDM Media Converter
10/100Base-TX to 100Base-FX (SC) Single-Mode
Double your traffic capacity with ease!
The INTELLINET NETWORK SOLUTIONS™ Fast Ethernet WDM (bi-directional wavelength division
multiplexing) Media Converter utilizes a single strand of fiber to transmit network traffic on separate
receive and transmit wavelengths (1310/1550 nm). This innovative technology allows you to effectively
use the two strands for two independent connections or to double the capacity without digging in a
second fiber cable. The converter is completely transparent to the network so the network performs
exactly the way it did before — only now it can support both copper and fiber mediums.
Expands the Size of an Existing Network
Provides fiber connectivity to Ethernet segments, allowing for even further networking expansion between extended
workgroups. Also provides building-to-building connectivity without the need for the cost and disruption associated
with the installation of additional routers.
Enhances the Distance between Networking Devices
Connecting the converter to fiber segments can further extend distances between networking nodes. This can be
achieved by direct connection between the converter and a fiber-based node or networking device.
Model
510530
Cabling Flexibility
Network managers can install fiber cabling anywhere within a network without changing the arrangement of
copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop
location or to be used in a wall-mount installation. Several converters can be simultaneously installed into a
19” rack-mountable chassis.
Lifetime Warranty
Strict manufacturing standards ensure the highest quality in all INTELLINET NETWORK SOLUTIONS
products. All items carry a full Lifetime Warranty — the strongest quality commitment anyone can make.
Page 2
Model
510530
Features
• Data transfer rate: 100 Mbps
• WDM (wavelength division multiplexing)
technology utilizes only one strand of fiber to
transmit data on separate receive and transmit
wavelengths
• Wavelengths: receive (RX), 1310 nm; transmit
(TX), 1550 nm
• 10/100Base-TX RJ-45 port, maximum distance
100 m / 300 ft. (Cat5e and better)
• RJ-45 port with Auto MDI/MDI-X support
• 100Base-FX single-mode Fiber SC port
• Fiber distance support: up to 20 km / 12.4 mi.
(9/125 µm cable)
• Status LEDs for easy monitoring of device
status
• Link Fault Signaling (LFS)
• Remote and local loop back test
• DIP switches for multiple configuration options
• External power adapter
• Can be used stand-alone or in INTELLINET
NETWORK SOLUTIONS converter chassis
model 519151 (12 Port) and 517553 (4 Port)
• WDM Media Converter Models 510547 and
510530 need to be installed as pairs on
opposite sides of the same fiber cable
• Lifetime Warranty
Specifications
STANDARDS
• IEEE 802.3 (Twisted Pair Ethernet)
• IEEE 802.3u (Twisted Pair/Fiber Optic Fast
Ethernet)
GENERAL
• Media support:
- 10/100Base-TX Cat5e or higher UTP/STP
RJ-45
- 100Base-FX single-mode 9/125 µm Fiber
• Connectors:
- RJ-45 port, 10/100Base-TX
- Fiber SC port, 100Base-FX
• Distances:
- 20 km / 12.4 mi. (9/125 µm Fiber cable)
- 100 m / 300 ft. (RJ-45 cable)
• Wavelengths:
- Receive (RX): 1310 nm
- Transmit (TX): 1550 nm
• Min. TX power: -14 dBm
• Max. TX power: -8 dBm
• RX sensitivity: -31 dBm
• Min. power budget: 17 dB
• Max. power budget: 23 dB
• Certifications: FCC Class A, CE Mark
LEDS
• Power
• LINK/TX for RJ-45 port
• LINK/TX for Fiber SC port
DIP SWITCHES
• DIP 1 - enables/disables auto-negotiation
• DIP 2 - copper port (RJ45) duplex mode; full
duplex or half duplex
• DIP 3 - copper port (RJ45) data bit rate; 10Mbps
or 100Mbps
• DIP 4 - Fiber port duplex mode; full duplex or half
duplex
• DIP 5 - enables/disables link fault signaling (LFS)
• DIP 6 - enables/disables local loop back (LLBK)
• DIP 7 - enables/disables remote loop back (RLBK)
POWER
• External power adapter: 12 V DC, 0.5 A
• Power consumption: 2.5 Watts (maximum)
ENVIRONMENTAL
• Metal housing
• Dimensions: 109 (L) x 74 (W) x 23 (H) mm
(4.2 x 2.9 x 0.9 in.)
• Weight: 160 g (0.34 lbs.)
• Operating temperature: 0 – 50°C (32 – 122°F)
• Operating humidity: 10 – 80% RH, non-condensing
• Storage temperature: -20 – 70°C (-4 – 158°F)
PACKAGE CONTENTS
• Fast Ethernet WDM Media Converter
• External power adapter
• User manual
For more information on INTELLINET NETWORK SOLUTIONS products,
consult your local dealer or visit
All names of products or services mentioned herein are trademarks or registered trademarks of their respective owners. Distribution and reproduction of this document, and use and disclosure of
the contents herein, are prohibited unless specifically authorized.
www.intellinet-network.com
.
Copyright © INTELLINET NETWORK SOLUTIONS
INT-510530-DS-1007-01
Loading...