Intellinet 507356 Instructions Manual

14-Slot Media
Converter Chassis

Instructions

Model 507356

I N T - 5 0 73 5 6 - U M - 1115 - R e v 5 . 0 1

Important: Read before use. • Importante: Leer antes de usar.

intellinetnetwork.com

Product Information

Product Overview

The Intellinet Network Solutions 507356 Media Converter Chassis accommodates
up to 14 media converters in a single unit. The media converter Chassis allows
hot-swapping the media converters, and provides strong redundancy due to
its two integrated power supplies. Two high-volume cooling fans ensure a cool
operating environment.

Features

• High-quality 19” rackmount steel chassis

• Supports up to 14 stand-alone media converters

• Two internal 100 – 260V universal switching power supplies avoid network

downtime and protect your converter investments

• Power supplies support load sharing, and circuit-breakers

protect against over voltage and short circuits

• Two high-volume cooling fans ensure perfect ventilation

• Slot power isolation ensures each slot is electrically isolated from the next

Specications

• Capacity: 14 slots for up to 14 media converters

• Occupies 2 height units (2U)

• Certications: FCC Class A, CE

• LED for each power supply

• Power Input: 100 – 260 VAC, output: 5 VDC

• Material: aluminum/steel

• Dimensions: 440 (L) x 231 (W) x 90 (H) mm

• Operating temperature: 0 – 50°C (32 – 122°F)

• Operating humidity: 5 – 95% RH, non-condensing

• Storage temperature: -20 – 85°C (-4 – 185°F)

Package Contents

• Media Converter Chassis with 2 integrated power supplies

• 14 media converter carries brackets

• Installation instructions

14-Slot Media Converter Chassis Instructions

2

Installation

1. Remove the slot cover by

turning the screw counter
clockwise.

2. Attach the carrier bracket to

the media converter.

First, unscrew the two screws

on the side of the media
converter housing, as

indicated by the circles.

3. Next, use these screws to
ax the bracket to the

media converter housing.
You will need a screw

driver with a Phillips –
head (“crosshead”).

Note: You need to attach

the bracket to the side of the

media converter, on which the
power plug is located. Check
the rear of the media converter
housing to nd out on which
side the carrier

brackets needs to
be connected to.

14-Slot Media Converter Chassis Instructions

3