Intellinet 503495, 503532, 503570 User Manual
GIGABIT
INDUSTRIAL
ETHERNET
SWITCH
USER
MANUAL
MODELS
503495,
503532,
503570
INT-503495/503532/503570-UM-0308-01
Model shown: 503495
INTRODUCTION
Thank you for purchasing this INTELLINET NETWORK SOLUTIONS™
Industrial Gigabit Ethernet Switch:
• Model 503495 (6-port 10/100Base-TX + 2-port 1000Base-SX [SC]
Multi-Mode);
• Model 503532 (6-port 10/100Base-TX + 2-port 1000Base-LX [SC]
Single-Mode); or
• Model 503570 (6-port 10/100Base-TX + 2-port 10/100/1000Base-TX).
Specically designed for industrial Ethernet applications, this switch has
all the functions of an unmanaged switch in a robust, aluminum case
that offers IP30-standard protection.
To meet industrial device-redundancy requirements, the Industrial Gigabit
Ethernet Switch is equipped with a terminal block to provide dual power
inputs with reverse polarity protection. Plus, store and forward switching
architecture greatly increases the network efciency: It delivers true non-
blocking switching performance to all ports running at full wire speed
without any loss of packets.
Easy-to-follow instructions in this user manual help make installation of
the switch quick and simple, so you’ll also soon be enjoying the benets
of these additional features:
• Auto-sensing RJ-45 ports automatically detect optimal network speeds
• All RJ-45 ports with Auto MDI-X and NWay auto-negotiation support
• Alarm relay output to alert of power failure
• Full/half duplex operation
• Supports IEEE 802.3x ow control on full duplex and back pressure
on half duplex
• Supports 2048 MAC address entries
• 128 kBytes buffer memory
• LEDs for link/activity and full/half duplex
• DIN rail kit, or wall-mounting ears for 3-way installation
• Terminal block to provide dual power inputs with reverse polarity
protection
• Lifetime Warranty
3
Loading...