Intellinet 501620 Quick Install Manual
Rackmount
console
kVm switch
quick
install
guide
MODEL 501620
INT-501620-QIG-0408-01
2
2
intRoduction
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Rackmount
Console KVM Switch, Model 501620 (15” LCD, 8-port).
Manage up to eight PS/2 or USB computers from one keyboard, monitor and
mouse, all housed in an industry-standard 19” 1U-height rack drawer. The spacesaving console is easily pulled out and accessed in the extended position, and
the display can be folded down, locked and secured when stored. Plus, when
the console is cascaded with other KVM switch modules to increase server
management capacity, you save even more space.
The Rackmount Console KVM Switch comes with a universal CEN36 connector
for connection between the console drawer and a KVM switch module. This
modularized design offers maximum flexibility, as you can choose and swap
the modules to fit your needs. A KVM switch module can also be used as an
independent KVM switch.
This quick installation guide shows you how to assemble and position the rackmount
console. Follow the steps for quick and easy installation and you’ll soon be enjoying
these additional popular features:
• Flip-open 15” LCD panel supports 1024 x 768 resolution
• For rack cabinets with depth from 67.5 to 80.5 cm (265/8” to 315/8”)
• Full 105-key, low-profile, sturdy keyboard
• Ergonomic hand-rest design
• Ultra-sturdy, tilt-free, 2-piece rear bracket and extension design
• OSD control and adjustment
• Cascadable to all INTELLINET NETWORK SOLUTIONS Rackmount PS/2 KVM
switches for expansion
• Auto-scan automatically selects computers sequentially
• Supports Microsoft IntelliMouse (Pro)
• Supports both PS/2 and serial mouse
• Assign computers unique and meaningful names
• Programmable scan filters unused computers
• Store system settings and name entries to non-volatile memory
• Password security protects computers from unauthorized use
• Gain complete control with easy-to-use OSD interface
• Hotkey functions allow easy computer access
• Keyboard states automatically saved and restored when switching computers
• Operating system independent, transparent to all applications
• Plug and Play system configuration
• Keyboard and mouse can be hot plugged at any time
• DDC2B compatible
• Includes one set of 1.8 m (6 ft.) connection cables for PS/2 computer
• Lifetime Warranty
3
console assembly
Parts
Three-Section
Console:
A. 1U slide drawer with keyboard,
touchpad and
LCD monitor.
B. 1U KVM
Switch Module.
C. Rear bracket and
extension kit.
Rear Bracket and Extension Kit:
Each Rackmount Console KVM Switch
features a rear bracket and extension
kit, which includes two pieces of rear
brackets and two pieces of extensions.
The enclosed kit fits cabinet depths of
67.5 – 80.5 cm (26 5/8 – 31 5/8”), as
measured between the inside of a rack cabinet’s front
and rear uprights. As shown at right, the brackets and
extensions come in different lengths, and will vary
depending on the model.
Assembly
1. Choose a proper position
for the rack drawer. Mount
the rear brackets (from the
rear bracket and extension
kit), and loosely fasten
them onto the rear vertical
uprights of the cabinet as
shown. Both will be
removed later.
3
Loading...