Intelligent Weighing Technology MII-600, MII-3000, MII-1200, MII-6000 Operation Manual

MII SERIES

DIGITAL WEIGHING SCALE

OPERATION MANUAL

PLEASE READ THIS MANUAL VERY CAREFULLY

BEFORE ATTEMPTING TO OPERATE THE SCALE

February 2006 Rev 2

Specifications subject to change without prior notice.

CONTENTS

1. INSTALLATION

2. SPECIFICATIONS

3. KEYBOARD LAYOUT AND DESCRIPTION

4. INITIAL SETUP

5. INSTRUCTIONS FOR USE

6. TROUBLE SHOOTING

7. DAILY CARE AND MAINTENANCE

1. INSTALLATION

1.1 Check to make sure that the following items are
included:

This operation manual
Scale x 1

Stainless steel platter cover x 1
Power adapter x 1

Contact your dealer if any items are missing.

1.2 Insert the legs of the plastic platter carefully into the
holes on top of the scale, then place the stainless steel
platter on top.

1.3 Power the Scale
a. Insert one 9V battery into the battery pack

underneath the scale, or
b. Connect the power adapter. Before plugging the

power adapter into electricity outlet, check to make sure
that the input voltage of the power adapter matches the
output voltage of the outlet. If not, do not plug in the
adapter. Contact your dealer immediately.

CAUTION:
When the power adapter is being used, take the battery

out from the battery pack. Failure to do so may cause
battery leak / explosion or damage to the scale. Do not

use any rechargeable battery. The scale does not
recharge any battery.

1.4 Retain the packing materials for future transportation
use.