DVR Door Entry System Combo
USER MANUAL
INDEX
Chapter 1: Installation Guide
Chapter 2.1: Panel operation
Chapter 2.2: Wiring Interface
Chapter 2.3: Remote Controller
Chapter 3: Basic Operation
Chapter 4: Parameter Setting
Chapter 4: Parameter Setting cont. - Video Management Part 1
Chapter 4: Parameter Setting cont. - Video Management Part 2
Chapter 4: Parameter Setting cont. - ALARM SETUP
Chapter 4: Parameter Setting cont. - Hard drive setup
Chapter 4: Parameter Setting cont. - Miscellaneous setup
Chapter 4: Parameter Setting cont. - Network setup
Chapter 4: Parameter Setting cont – TFT Setup
Chapter 4: Parameter Setting cont. - web access
Chapter 5: Login window
Warranty
DVR with video door phone -Chapter 1: Installation Guide
Caution: Please make sure to d isconnect t he po wer supply before installat ion!
1.1 What is included?
While opening the box, p lease check:
Each component is intact without scratches and bro ken.
All accessories listed bellow are included:
• 1 x Monitor
• 1 x Outdoor camera
• 1 x remote controller
• 1 x power adaptor
• 1 x Monitor stand
• 1 x Mounting bracket
• 1 x Use r ma nual
• 1 x 15 meter outdoor camera cable (4 p ins)
• 4 x BNC connection cable (6 pins)
• 1 x Alarm extens ion cable (5 pins)
• 1x Screws bag
1.2 Preparat ion before insta llation
1. Fix the mounting br acke t on the wall or table before installation.
2. Please ensure for safe operation of the device with required vent ilation and keep from humid
environment.
3. Make sure there is enough space for all connection cables. Cable bending r adius should not be less than 5
times of the cable diameter .
1.3 Hard disk installation
1. Hard disk specification: 2.5 Inch SATA hard disk (maximum 500G).
2. How to install:
Caution: The system will auto maticall y for mat the hard disk before you start recording.
DVR with video door phone -Chapter 2.1: Panel operation
2.1 Panel operation
Chart 1: Front panel keys instruction
No. Type Icon Details
1
Indicator
light
Po wer indicator, b lu e lig ht when in w or king mode.
2
Display
keys
Channel 1/ Number key 1: full screen display real time monitor of
channel 1.
Channel 2/ Number key 2: full screen display real time monitor of
channel 2.
Channel 3/ Number Key 3: full screen display real time monitor of
channel 3.
Channel 4/ Number Key 4: full screen display real time monitor of
channel 4.
Quad monitor : display four channels at same time.
3
Function
keys
Enter/exit key: enter/exit main menu, s ave settings when exit
Audio channel select: sw itchover audio of a channel to be played on
monitor.
Record key.: press to st art reco r ding of preset camera( s)
Stop key: stop recording/playback operation.
Play: press to play record.
4
Control
keys
Up key
Down key
Left/backward ke y: in playback mode, press to backward
Right/forwar d k ey: in playback mode, pr ess to for war d
Confirm key
5
Monitor/talk
key
Monitor outside or talk to visitors.
6 Unlock key
Open the door for visitors.
7
IR Receiver
window
Direct to the IR receiver when you use remote controller.
8 Microphone
When door phone is in use, talk to visitors through the microphone.
DVR with video door phone -Chapter 2.2: Wiring Interface
Chart 2: Wiring interface inst r u ction
1 Power supply DC 12V/14V
2 Outdoor station 2 interface Connect to outdoor station 2, 4 pin S-Terminal.
3
Outdoor station 1
interface
Connect to outdoor station 1, 4 pin S-Terminal.
4 Network interface Connect to the internet.
5 Camera 1 interface Connect to Camera 1, 6-p i n S-Terminal.
6 Camera 2 interface Connect to Camera 2, 6-p i n S-Terminal.
7 Camera 3 interface Connect to Camera 3, 6-p i n S-Terminal.
8 Camera 4 interface Connect to Camera 4, 6-p i n S-Terminal.
9 Sensor interface Connect to external sensor and a larm devices, 5 -pin S-Terminal.
DVR with video door bell-Chapter 2.3: Remote Controller
Chart 3: Remote controller function key instruction
No.
Name
Icon
Operation
1 Menu key
Enter/exit menu
2
Direction/confirm
keys
Up
Down
Backward
Forward
Confirm
3
Audio channel
select key
Switchover audio o f a channel
4
Di splay keys
Channle 1/number key 1
Channel 2/number key 2
Channel 3/number key 3
Channel 4/number key 4
Quad monitor
5 REC key
Record
6 Stop ke y
Stop
7
Monitor display
off key
Turn off monitor display
8 Monitor/talk key
Monitor / talk
9 Unlock key
Unlock
10 Play key
Play
DVR with video intercom - Chapter 3: Basic Operation
3.1 How to switch on/off
(1). Switch on
Push the power switch on the left side of the indoor unit, the monitor will start.
Note: The monitor shows quad monitoring at starup as default mode. If the time is within schedu le recording
time, the system will auto mat ically star t t he schedule recording function, and the n t he system will continue
to work properly.
(2). Switch off
Press t he st op key to turn the system in stop reco rdi ng mode, and then push the power sw itch on
the left side of the indoor unit. The system stops running.
(3). Power failure recovery
If the DVR is in recording mode and the system power is cut or shut off, after regaining of power supply, the
DVR will automatically save the video befor e the po w er loss and auto mat ica lly ret ur n to the wo rking mode
befo re powe r loss, and then co ntinue working.
DVR with door entry system - Chapter 4: Parameter Setting
4.1 Main menu instruction
Under the stop recording mode, push the button eithe r o n the monitor or the re mote cont r oller, then
show s the fo llowing sc reen:
The follo wing is the introduction on s ub-me nu fu nc t io ns.
4.2 Video Management
4.2.1 CAMERA SET UP
Each channel can be set separat ely on or off. If set to off, the corresponding screen goes black, the screen
does not display image of the channel. T he co r r esponding video ercor ding function is closed. When re-open
the channel, you need to enter the camera setup to tu r n on the same channel before recording, as shown in
bellow picture:
Met hod: pu s h the bu tton 、 、 or , to put to the channel to be set, and
then, pu sh to set the chan ne l "ON" or "OFF".
DVR8 - Chapter 4: Parameter Setting cont. - Video Management Part 1
4.2.2 RECORDING SETUP
Each channel can be set separat ely to record video or not, if it is set to "OFF", thescreen will continue to
show channel pictures, but not for recording.
Method: push the button 、 、 or , to put to the chann el to be set, an d then,
push to set the channel "ON" or "OFF". Th ere are three options: "OPEN","OFF", " CAM".
4.2.3 RECORDING FRAMETRATE
Frame ra te of each channel can be sep aratel y set 1,2, 3,4,5,6,7,8,9,12,16,25 FPS / sec. For PAL system, the total frame rate is 50
FPS; for N TSC system, 60 PFS. In the case of PAL s ystem , the average per ch an nel is 12P FS . I f a p ar ticular channel’s frame r ate
is set to more than 12PFS, the additional frame rate needs to be borrowed from other channels.
Method: push the button 、 、 or , to put to the channel to be set, and then,
push to set the chann el.
DVR8 - Chapter 4: Parameter Setting cont. - Video Management Part 2
4.2.4 VIDEO QUALITY
The setting of video recording quality has 3 selections: "HIGH", "NORMAL" and "LOW".The higher
grades, the better video recording quality, also with t he bigger capac it y o f video file occuping the hard disk
space.
Met hod: pu s h the bu tton 、 、 or , to put to the t ime per iod, and t hen,
push to set the recording mode during this period.
Met hod: pu s h the bu tton 、 、 or , to put to the channel to be set, and
then, pu sh to set the required video quality.
4.2.5 RECORDING SCHEDULE
The "RECORDING SCHEDULE" has 3 options: "NO RECORDING", "RECORDING" and "ALARM
RECORDING". It can be set to each hour in 24 hours.
NO RECORDING: Set to this mode will not record;
RECORDING: Set to this mode will record nor mally;
ALARM RECORDING: This mode for motion detection recor ding and alarm recording.
DVR8 - Chapter 4: Parameter Setting cont. - ALARM SETUP
4.3 ALARM SETUP
This s e tting is for the c ir cums tance s when syst em detects trigg er ing event s during ope ration, a nd the
reactions to thiese event s.
RECORDING TIME ON ALARM: whe n a triggering event encountered , the system will automatically
record the correspo nd ing channe l. The recording time has six options: 5, 10, 15, 20, 25, 30, the system will
stop recording if during the channel recording time no triggering event occurs again.
ALARM DURATION: when there is an alarm signal, select one of the following options (OFF, ON) 5, 10,
15, 20, 25, 30. Selecting OFF will not alarm; selecting ON, the buzzer will keep alarming until manually
shut off ( press any key to stop);
VIDEO LOSS SETUP: During the monitor ing process, if the video cable connection is not good, the indoor
unit will alarm with sound. There are "ON" and "OFF" optional.
H/W S ENS O R SE TUP : when there is a n ext ernal alarm sensor, if the s ensor is trigger e d, the syst em will
record via the correspond ing camera. T he indoor unit will alarm with sound (if connect to ext er nall alarm
device, the system can also dr ive the alarm). T he syste m can connect to two ways of alarm sensor inputs.
MOTION D ETE C TION SETUP: eac h c hannel ha s "ON" and " OFF " optional. Four sen sit ivit y levels can be
selected on each area. The sensitivity increases w ith the number rising. The level of sensivity can be
adjusted by pressing .
DVR8 - Chapter 4: Parameter Setting cont. - Hard drive setup
4.4 Hard drive setup
This menu includes: overwriting, hard disk information and formatting s ettings.
OVERWR ITE ENABL ED : When set to 【YES】, if disk storage is full, it will automatically overwriter.
ST9408221AS: The current infor mation of hard disk.
MASTER HDD SIZE: The capac it y of current hard disk.
MASTER HDD USED: the occupation of hard disk space, displayed in percentage.
MASTER HDD FORMAT: For mat t he curr ent hard disk; t he system default password is 111111 (press
6 times)
DVR8 - Chapter 4: Parameter Setting cont. - Miscellaneous setup
4.5 Miscel laneous setup
This will set syst em-related issues, including PASSWORD SETTI NG, SET TIME, HI DDEN CHANNEL,
AUDIO PORT SETUP, MUSIC SELECT, LANGUAGE and USE PASSWORD LOGIN, etc.
PASSWORD SETTI NG: s ystem passwo r d can be set , s tand s for 1, stands for 2, stands
for 3 , stands for 4. The system default password is 111111. (press six times ).
Method:move to the "PASSWORD SETTING" ，and the n pus h to ent er sub -menu. Input old
password (default is 111111), and then input "NEW PASSWORD" and "CONFIRM NEW PASSWORD". If
input error, press to delete.
TIME: Set the system time.
Method s: p r e ss or to move to the digit you want to adjust, and then press to
change the numbe rs.
HID DEN CHANN EL: To se t a ce r tain cha nnel to be sho w n on the sc reen or not. However, und e r the
recording mode, the hidden channel can still be recorded. There are 5 options: "OFF", "1", "2", "3" and "4"
AUDIO PORT SETUP : 2 ways of audio port s can be set. Setting the RECROING OFF can select for audio
to be recorded or not.
For example: All the four ca meras have aud io input. No w need to set channel 1 and channel 3 to save the
audio around.
Methods:Move to "Audio Port 1", then press to select channel 1. Press to move
do w n t o next line
Set "AUDIO RECORDING" to "YES".
Move to "Audio Port 2", then press to select channel 3. P r ess to move down to
next line
Set "AUDIO RECORDING" to "YES".
Setting finis hed . .
MUSIC SELECT: This will set the ringing melody of the indoor unit when calling from outdoor station.
There are total 9 options, of which 00 is silent.
LANGUAGE: The default languages ar e C h inese and Eng l ish.
USE PASSWORD LOGIN: Default setting is "OFF"
DVR8 - Chapter 4: Parameter Setting cont. - Network setup
4.6 Network setup
NETWORK SETUP
1) Pres s [menu ] on the r emote controller to enter into t he main menu
Use arrow keys (▲) and (▼) to select "NETWORK SETUP" menu, p ress [OK] to confirm, and enter into
the "NETWORK SETUP" scr een.
IP Type: Support two kinds of IP, DHCP (dynamic) and STATIC (static), if DHCP is enabled then IP
address will be obtained t hrough the DHCP server automatically. I f selecting STATIC, then you will need to
manually set IP address, subnet mask, and gateway.
IP ADDRESS: Setting IP address
Using the keys (▲) and (▼) to select the numbers, left and right keys to select the digit you need to set up,
press [OK] button to confirm. Then press [Menu] to save and exit.
SUBNET MASK: Set the subnet mask
GATEWAY: Set the gat ew ay
DNS ADDRESS1: DNS address1 setting
DNS ADDRESS2: DNS address2 setting
HTTP PORT: Sett ing protocol port for network acess, the default value is 80, changea ble
1024-49151.
USER SETUP: there are 2 types of user IDs pro v ided for net wor k access, o ne is "ADMIN ID", with full
operat ing rights ; the o ther is "US ER ID", w hose right is o nly pre view the image.
DDNS SETUP: To set up Dynamic Domain Name Service. You will need to register from the DDNS ISP
service provider, and t hen set according to the registration information.
Note: All the IP address, subnet mask, g ateway, DNS1 can be obtained from the computer(connected to t he
same ro uter) by typ ing "ipco nfig /all" in the c ommand line.
DVR8 - Chapter 4: Parameter Setting cont – TFT Setup
4.7 TFT setup
The three options: BRIGHTNESS SET UP, CONTRAST SET UP AND SATURATION SET UP can be
adjusted, in which each of the adjust able rang e is from 0 to 30.
4.8 Reset menu
Input DVR system passwor d , to reset all settings to factory default except for the netwo r k set up and system
password. The default password is press111111 (i.e. press six times ).
Player software
The format of saved fi le s is .MCG and req uires special soft war e to play. Explore t he CD attached with the
product; open the so ftwar e to p lay the s aved fil es.
How to operate?
DVR8 - Chapter 4: Parameter Setting cont. - web access
1. Opening port
This is to open web access port from the router. Opening port on different types of routers will be in
different ways. For a specific router, please contact the vendor to get details. Here is an example to open
ports on a TP-Link router:
3. IE ACCESS: after opening port, open an IE browser process, select "Tools" - "Inter net Options" "Security" - "Internet" - "Custom Level". In the popup window, open all the ActiveX plug-ins and controls.
After opening Act iveX cont ro ls, re fresh IE browser and enter the access address in the Address bar:
http: //IP: [port] to vis it SV R host, a s s hown bellow:
Note:
a. You can access direct ly via LAN address if in LAN. WAN IP is needed for WAN access. The port
numb e r can be omitted when u sing the default port 80, for example: http://192.168.18.101
b. First visit will be prompted to install plug-in, se lect "Ye s " to ins ta ll it.
DVR with video door entry - Chapter 5: Login window
λ Connected: Display syst em connection statu s
λ Capture tools: Control the image capture and recor ding functions.
λ Remote DVR Contro l Panel : DVR Control
Connected: Displays t he curr ent connection status and the data t r ansfer rate.
Capture tools: image capt u r e and video st r eam capt u r e thro ugh functions on the le ft, a nd t he n s tore on the
PC.
The left side's functions.
DVR with video door entry - Chapter 5: IE Configuration
5.1 Configure and install IE
Note: you must configure IE security settings before remot e v iewing, detailed steps are as follows:
Right click the " Int e rnet explor er" icon on w indows de s ktop, in p op-up menu; select "Properties" to enter the
Int ernet Optio ns window as shown below:
1) C lick on the Custo m Level butto n, enter ing the Sec ur ity Setti ngs wi ndow to dow nload uns igned Active X
controls
2) C lick the O K button to fin ish the IE sec ur ity sett ings
3) After IE security is configured, you can now monitor from remote through IE.
5.2 IE operation
1) Open an IE browser, input the indoor unit's IP address, and then download plug-ins in the po p-up page.
Installa tio n will beg in a utomatica lly after dow nloading. If the plug -ins does not beging to download
automatically, p lease click "Download" in "If the plugin can not download, click here", when the do wnload
is finished, double click t o installation.
2) After the plug-in inst allatio n, it will po p up the fo llowin g screen. If not, plese close and restar t IE then
input the networ k address correctly.
Click , then appears the user name input bo x as the left pict ur e, ent er the user name and password:
user name and password are considered as ADMIN.
Note: The user name and password ar e all capita l letters.
Click to enlarge 2 times for the preview scree n.
WARRANTY CARD
NB Please keep this document safe, as it is proof of your Warranty
Your Video door system comes with a one year Manufacturers Warranty. When
used normally, the following services are offered:
1. Replacement for malfunctioning parts in first three months
2. Repair free of charge for malfunctioning parts in first year
The following actions will void the Warranty:
1. Damage to the device during installation
2. Damage to the device through misuse
3. Opening and/or disassembling the device
4. Attempting to force the device to perform functions for which it
is not intended
5. Attaching the device to power supplies other than those
recommended by the manufacturer
Distributor for Warranty purposes:
Intelligent Home Online Ltd
34a High Street
Hornsey
London
N8 7NX
+44 (0)20 83482040
www.intelligenthomeonline.com
www.laletrading.com
Product: ______________________________________________
Purchaser Name: _______________________________________
Invoice N: _____________________________________________
Purchase Date_____________________________________________
Loading...