Intelix HD-4X1 User Manual

HD-4X1 Installation Guide

Troubleshooting

Symptom

Possible Solutions

No signal

Verify HDMI cables and source and destination
HDMI ports are operational.

Video appears with no
audio

If using the ARC/SPDIF output, verify the Audio
Return option is set accordingly. See Operation
Instructions for more information.

If using destination device’s built-in speakers,
make sure destination device can decode the
audio format.

Installation Instructions

1. Power off the sources and destination device.

2. Connect sources to the HDMI inputs on the

HD-4X1. Connect destination device to the
HDMI output on the HD-4X1.

3. If the HD-4X1 is going to be connected to an

audio distribution system, connect a high
quality RCA cable to the ARC/SPDIF output.

4. If the HD-4X1 will be controlled by a third-

party control system, connect a DE9 cable to
the RS232 port.

5. Connect the included power supply to the

5VDC port. Connect the power supply to AC
power outlet.

6. Power on the HD-4X1.

7. Power on destination device and sources.

Important notice:

 Do not attempt to disassemble or alter the switcher housing.

There are no user-serviceable parts inside the unit. Doing
so will void your warranty.

 To minimize the possibility of equipment damage from

electrostatic discharge (ESD), all source and destination
equipment must be powered off during installation.

 Allow proper ventilation to reduce the risk of thermal

failure.

Operation Instructions

Source Selection (Front Panel)

The four inputs each have their own push button on
the front panel. Press the desired button to select
the corresponding input.

Menu Navigation (Front Panel)

Press the Menu button on the far left side of the
front panel to bring up the on screen display. Use
the up, down, left, and right push buttons to navigate
the menu and use the enter button to confirm
selections.

Source Selection and Menu Navigation (IR Remote)

All source selection and menu navigation buttons
found on the front panel can also be found on the
included infrared remote control.

Audio Return Channel & SPDIF Output

When connecting the HD-4X1 to an external audio
distribution system, the Audio Return option needs
to be set accordingly. If the connected display and
audio system supports ARC, set Audio Return to ‘on’.

If the connected display and/or audio system do not
support ARC, set Audio Return to ‘off’, and the
ARC/SPDIF output will operate as a standard coaxial
SPDIF output.

HD-4X1 Installation Guide

The Intelix HD-4X1 is a four input, one output HDMI

switcher. The HD-4X1 supports 3D, 1080p and PC

resolutions up to 1920x1200. It also supports 7.1 channel

audio, including Dolby® TrueHD and DTS-HD, and audio

return channel (ARC).

8001 Terrace Ave. Phone: [phone]
Suite 201 Toll-Free: 866-462-8649
Middleton, WI 53562 Fax: [phone]

HD-4X1 Installation Guide

Technical Specifications

I/O Connections

Input Connectors

4x HDMI, 1x 3.5mm IR remote input

Input Signal Types

HDMI (plus PC video up to WUXGA)

Output Connectors

1x HDMI, 1x coaxial SPDIF

Output Signal Type

HDMI

Frequency Bandwidth

2.25 Gbps (single link)

Compliance

HDMI, HDCP & CEC

Color Depth

Deep Color 36/30/24 Bit, 1080p

Embedded Audio

Up to Dolby Digital True HD and DTS-HD Master Audio

Return Audio Support

Audio Return Channel (ARC)

Control

Front Panel, RS232

Chassis and Environmental

Dimensions (HxWxD)

1.2”x7.9”x4” (30x200x102mm)

Shipping Weight

2.1 lbs. (0.95 kg)

Operating Temperature

0° to +40° C (+32° to +104° F)

Operating Humidity

20% to 90%, Non-condensing

Storage Temperature

-10° to +60° C (+14° to +140° F)

Storage Humidity

20% to 90%, Non-condensing

Enclosure

Painted Steel

Maximum Power Consumption

2 watts

External Power Supply

100~240VAC to 5VDC @ 2A

Regulatory

CE, RoHS

Other

Warranty

2 years

Command Code

Response

Description

s port a

>Select Input Port A

Select Input Port A

s port b

>Select Input Port B

Select Input Port B

s port c

>Select Input Port C

Select Input Port C

s port d

>Select Input Port D

Select Input Port D

s menu 0

>OSD MENU Off

OFF : No Display On-Screen MENU

s menu 1

>OSD MENU On

ON : Display On-Screen MENU

s info 0

>OSD System Information Off

OFF : No Display On-Screen System Information

s info 1

>OSD System Information On

ON : Display On-Screen System Information

s menuct u

>MENU Cursor Up Move

MENU Project Up Move

s menuct d

>MENU Cursor Down Move

MENU Project Down Move

s menuct l

>MENU Cursor Left Move

MENU Project Left Move

s menuct r

>MENU Cursor Right Move

MENU Project Right Move

s menuct e

>MENU Cursor Enter

MENU Project Enter

s arctx 1

>ARC mode is on

ARC Mode Is On

s arctx 0

>ARC mode is off

ARC Mode Is Off

s reset

>System Reset

System Reset

r port

>Select port ?

Show Select Input Port Status

r arctx

>ARC mode is ?

Show ARC Mode Status

r fwver

>FW Version : Vx.xx

Show Firmware Version

RS232 Transmission Format:

Baud Rate: 115200 bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit

ALL RS232 COMMANDS MUST
CONCLUDE WITH A CARRIAGE
RETURN AND LINE FEED.

8001 Terrace Ave. Phone: [phone]
Suite 201 Toll-Free: 866-462-8649
Middleton, WI 53562 Fax: [phone]