Intelix FLX-BO4A Specifications

FLX-BO4A Technical Specifications

Technical Specifications

I/O Connections

HDBaseT Port

Four (4) 8P8C port (Shielded RJ45)

Analog Audio Out

Four (4) 3.5 mm TRS

RS232

Four (4) 3 pole Euroblock Connectors

Supported Audio, Video and Control

Maximum Video Compatibility at 70 m

Deep Color 36/30/24 Bit at 1080p

Maximum Video Compatibility at 40 m

Deep Color 48 Bit at 1080p, 3D

Video Compliance

HDMI and HDCP

Embedded Audio

Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio

RS232 Baud Rate

Up to 115200 baud

Analog Audio

Performance per Channel

Unbalanced Stereo Audio, -10 dBV nominal

Pinout

TIP - Left (+), RING – Right (+), SLEEVE - Ground

Output Impedance

50Ω

Frequency Response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

< 0.002% from 20 Hz to 20 kHz

HDBaseT Signal Characteristics

Maximum Distance

70 m

Cable Requirements

Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern

Bandwidth

10.2 Gbps

Gain

0 dB – 10 dB at 100 MHz

Resolution Range

800x600 – 1920x1200

Signal to Noise Ratio (SNR)

> 70 dB at 100 MHz over 100 m

Return Loss

< -30 dB at 5 KHz

Total Harmonic Distortion (THD)

< 0.005% at 1 KHz

Min-Max Signal Level

< 0.3 V – 1.45 Vp-p

Differential Phase Error

±10° at 135 MHz over 100 m

Chassis and Environmental

Construction

Plug-in card with keyed black metal plate

Shipping Weight

0.43 kg (0.95 lbs.)

Operating Temperature

0° to +40° C (+32° to +104° F)

Operating Humidity

20% to 90%, Non-condensing

Storage Temperature

-10° to +60° C (+14° to +140° F)

Storage Humidity

20% to 90%, Non-condensing

Other

Warranty

2 years

Matrix Switcher Compatibility

FLX-88, FLX-1616, FLX-3232

Compatible Receivers (A/V and Control)

DIGI-HDE-R, DIGI-HD60C-R

Compatible Receivers (A/V Only)

DIGI-HD70-R

FLX-BO4A Technical Specifications

HDBaseT Output Card with Audio De-Embedding for FLX Series Matrices

Rev. 140814

The FLX-BO4A takes advantage of HDBaseT outputs connect any source device to a remote display, up to
70m away, utilizing standard Cat 5e cable. The bi-directional RS232 connections for each output allow
control signals at the equipment rack to control displays connected to compatible receivers. The FLX-BO4A
also includes the ability to extract stereo audio from the HDMI signal. The stereo analog audio is output
to 3.5mm jacks. The FLX-BO4A features advanced EDID handling features that ensure video and audio
compatibility, such as full copy and hybrid copy functions.

Distances and p icture quality may be affected by cable grade, cable quality, source an d destination e quipment, RF and electrical interference, and cable patches.

8001 Terrace Ave. Phone: [phone]
Suite 201 Toll-Free: 866-462-8649
Middleton, WI 53562 Fax: [phone]